121851 Euchner Safety Accessories

121851 on MQ Automation
Euchner
  • 121851
  • 121851

Part#:121851

Alt. Part#:MGB-L1B-PNA-R-121851

Manufacturer:Euchner

Category:Safety Accessories

Product Lifecycle:Active

Product description

121851 Euchner - Evaluation module and bus module MGB-L1...-PN... (guard locking by spring force) with 3 control elements, push-pull plug

Product Details

  • Weight
    7.58609742 lb
  • Series
    Spare parts
  • Product Class
    Accessories
  • Safety Integrity Level
    SIL 3 (EN 62061:2005)
  • Product version number
    V3.30.10
  • Mission time
    20
  • B10D
    0,13 x 10⁶
  • Diagnostic Coverage (DC)
    99
  • PFHD
    4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
  • Category
    4
  • Switching element
    1NO
  • Additional feature
    Incl. cover set ID. No. 120344
  • Performance Level
    PL e
  • Assignment diagram
    B1
  • Version
    Illuminated push buttons
  • Safety data protocol
    Profisafe (IEC 61784-3-3)
  • Bus data protocol
    Profinet (IEC 61158 type 10)
  • Transponder coding
    Unicode
  • Assured release distance Sar
    max.65 mm
  • Auxiliary voltage DC
    24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
  • Fusing
    min.1 A Slow blow
  • Safety class
    III
  • Operating voltage DC
    24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Connecting cable
    Profinet I/O cable, at least cat. 5e
  • EMC protection requirements
    In accordance with EN 61000-4 and EN 61326-3-1
  • Maximum feed-in current in the connection block
    max.4000 mA
  • Current consumption
    max.500 mA
  • Rated impulse withstand voltage Uimp
    0,5 kV
  • Rated insulation voltage Ui
    75 V
  • Locking force FZh
    2000 N
  • Guard locking principle
    Closed-circuit current principle
  • Ambient temperature
    -20 ... 55 °C
  • Connection
    Push-pull power (X1 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
  • Shock and vibration resistance
    In acc. with EN 60947-5-3
  • Degree of protection
    IP54
  • Reaction time
    max.250 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
  • Installation orientation
    Door hinge DIN right
  • Switching frequency
    0,25 Hz
  • Mechanical life
    0,1 x 10⁶
  • Housing material
    Reinforced plastic, die-cast zinc nickel-plated, stainless steel
  • Weight
    3,1 kg

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 121851 on MQ Automation is $2,930.28. Order now.


About the product

Guard locking with guard lock monitoring;Emergency stop according to ISO 13850, illuminated;2 illuminated pushbuttons;including adhesive labels;Push-pull plug;Pre-assembled on mounting plates;Integrated Profinet RT switch;Unicode


Manufacturer warranty

121851 Euchner

$2,930.28

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$2,930.28

$2,930.28 each

Average response time: 11 minutes

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 121851 with other products

Weight

Series

Product Class

Safety Integrity Level

Product version number

Mission time

B10D

Diagnostic Coverage (DC)

PFHD

Category

Switching element

Additional feature

Performance Level

Assignment diagram

Version

Safety data protocol

Bus data protocol

Transponder coding

Assured release distance ...

Auxiliary voltage DC

Fusing

Safety class

Operating voltage DC

Degree of contamination (...

Connecting cable

EMC protection requiremen...

Maximum feed-in current i...

Current consumption

Rated impulse withstand v...

Rated insulation voltage ...

Locking force FZh

Guard locking principle

Ambient temperature

Connection

Shock and vibration resis...

Degree of protection

Reaction time

Installation orientation

Switching frequency

Mechanical life

Housing material

For the approval acc. to ...

Operating current

Repeat accuracy R

Detent mechanism

Discrepancy time

Off-state current Ir

Operating voltage

Switching current

Type of output

Turn-on time

Switching load

Output voltage

Connection rating

Utilization category acc....

Overtravel

Test-pulse interval

Extraction force

Test pulses

Actuating force

Approach speed

Ready delay

Risk time according to EN...

Solenoid duty cycle

Solenoid operating voltag...

Extension of risk time ac...

Locking force Fmax

Retention force

Selected product

121851
0 in stock
121851
Euchner

121851 Euchner - Evaluation module and bus module MGB-L1...-PN... (guard locking by spring force) wi...

Weight7.58609742 lb

SeriesSpare parts

Product ClassAccessories

Safety Integrity LevelSIL 3 (EN 62061:2005)

Product version numberV3.30.10

Mission time20

B10D0,13 x 10⁶

Diagnostic Coverage (DC)99

PFHD4.07 x 10⁻⁸ (Fixed failure ...

Category4

Switching element1NO

Additional featureIncl. cover set ID. No. 1203...

Performance LevelPL e

Assignment diagramB1

VersionIlluminated push buttons

Safety data protocolProfisafe (IEC 61784-3-3)

Bus data protocolProfinet (IEC 61158 type 10)

Transponder codingUnicode

Assured release distance Sarmax.65 mm

Auxiliary voltage DC24 V DC -15% ... +10% (Th...

Fusingmin.1 A Slow blow

Safety classIII

Operating voltage DC24 V DC -15% ... 10% ((Re...

Degree of contamination (external, according to EN 60947-1)3

Connecting cableProfinet I/O cable, at least...

EMC protection requirementsIn accordance with EN 61000-...

Maximum feed-in current in the connection blockmax.4000 mA

Current consumptionmax.500 mA

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui75 V

Locking force FZh2000 N

Guard locking principleClosed-circuit current princ...

Ambient temperature-20 ... 55 °C

ConnectionPush-pull power (X1 (The do...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of protectionIP54

Reaction timemax.250 ms Switch-off time...

Installation orientationDoor hinge DIN right

Switching frequency0,25 Hz

Mechanical life0,1 x 10⁶

Housing materialReinforced plastic, die-cast...

For the approval acc. to UL the following applies-

Operating current-

Repeat accuracy R-

Detent mechanism-

Discrepancy time-

Off-state current Ir-

Operating voltage-

Switching current-

Type of output-

Turn-on time-

Switching load-

Output voltage-

Connection rating-

Utilization category acc. to EN 60947-5-2-

Overtravel-

Test-pulse interval-

Extraction force-

Test pulses-

Actuating force-

Approach speed-

Ready delay-

Risk time according to EN 60947-5-3-

Solenoid duty cycle-

Solenoid operating voltage DC-

Extension of risk time according to EN 60947-5-3 per device-

Locking force Fmax-

Retention force-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

Safety Integrity Level-

Product version number-

Mission time20 y

B10D0,13 x 10⁶

Diagnostic Coverage (DC)-

PFHD4.1 x 10 ⁻⁹

Category4

Switching element2 pos. driven NC

Additional feature-

Performance LevelPL e

Assignment diagram-

VersionEmergency stop

Safety data protocol-

Bus data protocol-

Transponder coding-

Assured release distance Sar-

Auxiliary voltage DC-

Fusing0,25 ... 8 A

Safety classIII

Operating voltage DC24 V DC -15% ... 15% Rev...

Degree of contamination (external, according to EN 60947-1)3

Connecting cable-

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Maximum feed-in current in the connection block-

Current consumption40 mA

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Locking force FZh-

Guard locking principle-

Ambient temperature-20 ... +55 °C

Connection2 plug connectors M12, 5-pin

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of protectionIP65 (Screwed tight plug co...

Reaction time-

Installation orientationDoor hinge DIN right

Switching frequencymax.0,5 Hz

Mechanical life1 x 10⁶

Housing materialFiber glass reinforced therm...

For the approval acc. to UL the following appliesOperation only with UL class...

Operating current1 ... 100 mA

Repeat accuracy R10 %

Detent mechanismSnap-in bolt

Discrepancy timemax.10 ms In acc. with EN ...

Off-state current Irmax.0,25 mA

Operating voltage5 ... 24 V

Switching current1 ... 150 mA

Type of output2 semiconductor outputs, p-s...

Turn-on timemax.400 ms

Switching load24V DC, class 2 (Alternativ...

Output voltage0 ... 1 V DC

Connection rating1 W

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Overtravel5 mm

Test-pulse intervalmin.100 ms

Extraction force20 N

Test pulsesmax.0,3 ms (Applies for a l...

Actuating force10 N

Approach speedmax.20 m/min

Ready delaymax.1 s

Risk time according to EN 60947-5-3-

Solenoid duty cycle-

Solenoid operating voltage DC-

Extension of risk time according to EN 60947-5-3 per device-

Locking force Fmax-

Retention force-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

Safety Integrity Level-

Product version number-

Mission time20 y

B10D-

Diagnostic Coverage (DC)-

PFHD4.1 x 10 ⁻⁹

Category4

Switching element-

Additional featureEscape release actuated by p...

Performance LevelPL e

Assignment diagram-

Version-

Safety data protocol-

Bus data protocol-

Transponder coding-

Assured release distance Sar-

Auxiliary voltage DC-

Fusing0,25 ... 8 A

Safety classIII

Operating voltage DC24 V DC -15% ... 15% Rev...

Degree of contamination (external, according to EN 60947-1)3

Connecting cable-

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Maximum feed-in current in the connection block-

Current consumption40 mA

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Guard locking principleClosed-circuit current princ...

Ambient temperature-20 ... +55 °C

Connection2 plug connectors M12, 5 and...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Reaction time-

Installation orientationAny

Switching frequencymax.0,5 Hz

Mechanical life1 x 10⁶

Housing materialDie-cast zinc

For the approval acc. to UL the following appliesOperation only with UL class...

Operating current-

Repeat accuracy R10 %

Detent mechanism-

Discrepancy timemax.10 ms In acc. with EN ...

Off-state current Irmax.0,25 mA

Operating voltage-

Switching current1 ... 50 mA

Type of outputp-switching, short circuit-p...

Turn-on timemax.400 ms

Switching load24V DC, class 2 (Alternativ...

Output voltage0,8xUB ... UB V DC

Connection rating6 W

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Overtravel5 mm

Test-pulse intervalmin.140 ms

Extraction force20 N

Test pulsesmax.1,0 ms (Applies for a l...

Actuating force10 N

Approach speedmax.20 m/min

Ready delay8 s

Risk time according to EN 60947-5-3max.260 ms

Solenoid duty cycle100 %

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Locking force Fmax3900 N

Retention force20 N

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

Relevant products

FAQ

What is the price of 121851?
The price of 121851 on MQ Automation is $2,930.28. Order now.

Out if stock but available for backorder.

121851 Euchner - Evaluation module and bus module MGB-L1...-PN... (guard locking by spring force) with 3 control elements, push-pull plug

What can I help you find today?

Recommended parts