121848 Euchner Safety Accessories
Part#:121848
Alt. Part#:MGB-L2B-PNA-R-121848
Manufacturer:Euchner
Category:Safety Accessories
Product Lifecycle:Active
Product description
121848 Euchner - Evaluation module and bus module MGB-L2...-PN... (guard locking by solenoid force) with 3 control elements, push-pull plug
Product Details
- Weight 7.67869146 lb
- Series Spare parts
- Product Class Accessories
- Mission time 20
- B10D 0,13 x 10⁶
- Safety Integrity Level SIL 3 (EN 62061:2005)
- Category 4
- Performance Level PL e
- Diagnostic Coverage (DC) 99
- Product version number V3.30.10
- Additional feature Incl. cover set ID. No. 120344
- Switching element 1NO
- PFHD 4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
- Safety data protocol Profisafe (IEC 61784-3-3)
- Version Illuminated push buttons
- Assignment diagram B1
- Bus data protocol Profinet (IEC 61158 type 10)
- Assured release distance Sar max.65 mm
- Fusing min.1 A Slow blow
- Operating voltage DC 24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
- Auxiliary voltage DC 24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
- Transponder coding Unicode
- Safety class III
- Connecting cable Profinet I/O cable, at least cat. 5e
- Degree of contamination (external, according to EN 60947-1) 3
- EMC protection requirements In accordance with EN 61000-4 and EN 61326-3-1
- Current consumption max.500 mA
- Rated impulse withstand voltage Uimp 0,5 kV
- Maximum feed-in current in the connection block max.4000 mA
- Rated insulation voltage Ui 75 V
- Guard locking principle Open-circuit current principle
- Locking force FZh 2000 N
- Connection Push-pull power (X1 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
- Degree of protection IP54
- Mechanical life 0,1 x 10⁶
- Switching frequency 0,25 Hz
- Housing material Reinforced plastic, die-cast zinc nickel-plated, stainless steel
- Installation orientation Door hinge DIN right
- Reaction time max.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
- Ambient temperature -20 ... 55 °C
- Weight 3,1 kg
- Shock and vibration resistance In acc. with EN 60947-5-3
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 121848 on MQ Automation is $2,930.28. Order now.
About the product
Guard locking with guard lock monitoring;Emergency stop according to ISO 13850, illuminated;2 illuminated pushbuttons;including adhesive labels;Push-pull plug;Pre-assembled on mounting plates;Integrated Profinet RT switch;Unicode
Manufacturer warranty
121848 Euchner
$2,930.28
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$2,930.28
$2,930.28 each
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 121848 with other products
Weight
Series
Product Class
Mission time
B10D
Safety Integrity Level
Category
Performance Level
Diagnostic Coverage (DC)
Product version number
Additional feature
Switching element
PFHD
Safety data protocol
Version
Assignment diagram
Bus data protocol
Assured release distance ...
Fusing
Operating voltage DC
Auxiliary voltage DC
Transponder coding
Safety class
Connecting cable
Degree of contamination (...
EMC protection requiremen...
Current consumption
Rated impulse withstand v...
Maximum feed-in current i...
Rated insulation voltage ...
Guard locking principle
Locking force FZh
Connection
Degree of protection
Mechanical life
Switching frequency
Housing material
Installation orientation
Reaction time
Ambient temperature
Shock and vibration resis...
For the approval acc. to ...
Operating current
Repeat accuracy R
Detent mechanism
Discrepancy time
Off-state current Ir
Operating voltage
Switching current
Type of output
Turn-on time
Switching load
Output voltage
Connection rating
Utilization category acc....
Overtravel
Test-pulse interval
Extraction force
Test pulses
Actuating force
Approach speed
Ready delay
Risk time according to EN...
Solenoid duty cycle
Solenoid operating voltag...
Extension of risk time ac...
Locking force Fmax
Retention force
Selected product
121848
Euchner
121848 Euchner - Evaluation module and bus module MGB-L2...-PN... (guard locking by solenoid force) ...
Weight7.67869146 lb
SeriesSpare parts
Product ClassAccessories
Mission time20
B10D0,13 x 10⁶
Safety Integrity LevelSIL 3 (EN 62061:2005)
Category4
Performance LevelPL e
Diagnostic Coverage (DC)99
Product version numberV3.30.10
Additional featureIncl. cover set ID. No. 1203...
Switching element1NO
PFHD4.07 x 10⁻⁸ (Fixed failure ...
Safety data protocolProfisafe (IEC 61784-3-3)
VersionIlluminated push buttons
Assignment diagramB1
Bus data protocolProfinet (IEC 61158 type 10)
Assured release distance Sarmax.65 mm
Fusingmin.1 A Slow blow
Operating voltage DC24 V DC -15% ... 10% ((Re...
Auxiliary voltage DC24 V DC -15% ... +10% (Th...
Transponder codingUnicode
Safety classIII
Connecting cableProfinet I/O cable, at least...
Degree of contamination (external, according to EN 60947-1)3
EMC protection requirementsIn accordance with EN 61000-...
Current consumptionmax.500 mA
Rated impulse withstand voltage Uimp0,5 kV
Maximum feed-in current in the connection blockmax.4000 mA
Rated insulation voltage Ui75 V
Guard locking principleOpen-circuit current princip...
Locking force FZh2000 N
ConnectionPush-pull power (X1 (The do...
Degree of protectionIP54
Mechanical life0,1 x 10⁶
Switching frequency0,25 Hz
Housing materialReinforced plastic, die-cast...
Installation orientationDoor hinge DIN right
Reaction timemax.550 ms Switch-off time...
Ambient temperature-20 ... 55 °C
Shock and vibration resistanceIn acc. with EN 60947-5-3
For the approval acc. to UL the following applies-
Operating current-
Repeat accuracy R-
Detent mechanism-
Discrepancy time-
Off-state current Ir-
Operating voltage-
Switching current-
Type of output-
Turn-on time-
Switching load-
Output voltage-
Connection rating-
Utilization category acc. to EN 60947-5-2-
Overtravel-
Test-pulse interval-
Extraction force-
Test pulses-
Actuating force-
Approach speed-
Ready delay-
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
Weight3.968316 lb
SeriesMGBS-P-I-AP
Product ClassSafety System
Mission time20 y
B10D0,13 x 10⁶
Safety Integrity Level-
Category4
Performance LevelPL e
Diagnostic Coverage (DC)-
Product version number-
Additional feature-
Switching element2 pos. driven NC
PFHD4.1 x 10 ⁻⁹
Safety data protocol-
VersionEmergency stop
Assignment diagram-
Bus data protocol-
Assured release distance Sar-
Fusing0,25 ... 8 A
Operating voltage DC24 V DC -15% ... 15% Rev...
Auxiliary voltage DC-
Transponder coding-
Safety classIII
Connecting cable-
Degree of contamination (external, according to EN 60947-1)3
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Current consumption40 mA
Rated impulse withstand voltage Uimp0,5 kV
Maximum feed-in current in the connection block-
Rated insulation voltage Ui50 V
Guard locking principle-
Locking force FZh-
Connection2 plug connectors M12, 5-pin
Degree of protectionIP65 (Screwed tight plug co...
Mechanical life1 x 10⁶
Switching frequencymax.0,5 Hz
Housing materialFiber glass reinforced therm...
Installation orientationDoor hinge DIN right
Reaction time-
Ambient temperature-20 ... +55 °C
Shock and vibration resistanceIn acc. with EN 60947-5-3
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current1 ... 100 mA
Repeat accuracy R10 %
Detent mechanismSnap-in bolt
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage5 ... 24 V
Switching current1 ... 150 mA
Type of output2 semiconductor outputs, p-s...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0 ... 1 V DC
Connection rating1 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.100 ms
Extraction force20 N
Test pulsesmax.0,3 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delaymax.1 s
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
122813
Euchner
122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release
Weight1.763696 lb
SeriesCTP-AR
Product ClassSafety System
Mission time20 y
B10D-
Safety Integrity Level-
Category4
Performance LevelPL e
Diagnostic Coverage (DC)-
Product version number-
Additional featureEscape release actuated by p...
Switching element-
PFHD4.1 x 10 ⁻⁹
Safety data protocol-
Version-
Assignment diagram-
Bus data protocol-
Assured release distance Sar-
Fusing0,25 ... 8 A
Operating voltage DC24 V DC -15% ... 15% Rev...
Auxiliary voltage DC-
Transponder coding-
Safety classIII
Connecting cable-
Degree of contamination (external, according to EN 60947-1)3
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Current consumption40 mA
Rated impulse withstand voltage Uimp0,5 kV
Maximum feed-in current in the connection block-
Rated insulation voltage Ui50 V
Guard locking principleClosed-circuit current princ...
Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...
Connection2 plug connectors M12, 5 and...
Degree of protectionIP67/IP69/IP69K (Screwed ti...
Mechanical life1 x 10⁶
Switching frequencymax.0,5 Hz
Housing materialDie-cast zinc
Installation orientationAny
Reaction time-
Ambient temperature-20 ... +55 °C
Shock and vibration resistanceIn acc. with EN 60947-5-3
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current-
Repeat accuracy R10 %
Detent mechanism-
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage-
Switching current1 ... 50 mA
Type of outputp-switching, short circuit-p...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0,8xUB ... UB V DC
Connection rating6 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.140 ms
Extraction force20 N
Test pulsesmax.1,0 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delay8 s
Risk time according to EN 60947-5-3max.260 ms
Solenoid duty cycle100 %
Solenoid operating voltage DC24 V DC -15% ... +10% Re...
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Locking force Fmax3900 N
Retention force20 N
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 121848?
The price of 121848 on MQ Automation is $2,930.28. Order now.
Out if stock but available for backorder.
121848 Euchner - Evaluation module and bus module MGB-L2...-PN... (guard locking by solenoid force) with 3 control elements, push-pull plug
Similar products from: Safety Accessories
What can I help you find today?
