121831 Euchner Safety Accessories
Part#:121831
Alt. Part#:MGB-L1B-PNA-R-121831
Manufacturer:Euchner
Category:Safety Accessories
Product Lifecycle:Active
Product description
121831 Euchner - Evaluation module and bus module MGB-L1...-PN (guard locking by spring force) with 2 control elements, push-pull plug
Product Details
- Weight 7.5949159 lb
- Series Spare parts
- Product Class Accessories
- Safety Integrity Level SIL 3 (EN 62061:2005)
- Mission time 20
- PFHD 4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
- Performance Level PL e
- Category 4
- Diagnostic Coverage (DC) 99
- Product version number V3.30.10
- Additional feature Incl. cover set ID. No. 120344
- Switching element 1NO
- Fusing min.1 A Slow blow
- Bus data protocol Profinet (IEC 61158 type 10)
- Assignment diagram B1
- Safety data protocol Profisafe (IEC 61784-3-3)
- Version Illuminated push buttons
- Assured release distance Sar max.65 mm
- Auxiliary voltage DC 24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
- Operating voltage DC 24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
- Connecting cable Profinet I/O cable, at least cat. 5e
- Degree of contamination (external, according to EN 60947-1) 3
- EMC protection requirements In accordance with EN 61000-4 and EN 61326-3-1
- Transponder coding Unicode
- Safety class III
- Rated insulation voltage Ui 75 V
- Maximum feed-in current in the connection block max.4000 mA
- Current consumption max.500 mA
- Rated impulse withstand voltage Uimp 0,5 kV
- Locking force FZh 2000 N
- Guard locking principle Closed-circuit current principle
- Mechanical life 0,1 x 10⁶
- Reaction time max.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
- Installation orientation Door hinge DIN right
- Connection Push-pull power (X1 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
- Housing material Reinforced plastic, die-cast zinc nickel-plated, stainless steel
- Ambient temperature -20 ... 55 °C
- Switching frequency 0,25 Hz
- Degree of protection IP54
- Weight 3,1 kg
- Shock and vibration resistance In acc. with EN 60947-5-3
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 121831 on MQ Automation is $2,826.20. Order now.
About the product
Guard locking with guard lock monitoring;2 illuminated pushbuttons;including adhesive labels;Push-pull plug;Pre-assembled on mounting plates;Integrated Profinet RT switch;Unicode
Manufacturer warranty
121831 Euchner
$2,826.20
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$2,826.20
$2,826.20 each
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 121831 with other products
Weight
Series
Product Class
Safety Integrity Level
Mission time
PFHD
Performance Level
Category
Diagnostic Coverage (DC)
Product version number
Additional feature
Switching element
Fusing
Bus data protocol
Assignment diagram
Safety data protocol
Version
Assured release distance ...
Auxiliary voltage DC
Operating voltage DC
Connecting cable
Degree of contamination (...
EMC protection requiremen...
Transponder coding
Safety class
Rated insulation voltage ...
Maximum feed-in current i...
Current consumption
Rated impulse withstand v...
Locking force FZh
Guard locking principle
Mechanical life
Reaction time
Installation orientation
Connection
Housing material
Ambient temperature
Switching frequency
Degree of protection
Shock and vibration resis...
For the approval acc. to ...
Repeat accuracy R
Discrepancy time
Output voltage
Turn-on time
Off-state current Ir
Switching current
Type of output
Switching load
Risk time according to EN...
Solenoid duty cycle
Connection rating
Solenoid operating voltag...
Utilization category acc....
Test pulses
Test-pulse interval
Actuating force
Extension of risk time ac...
Extraction force
Overtravel
Locking force Fmax
Approach speed
Retention force
Ready delay
B10D
Operating current
Detent mechanism
Operating voltage
Selected product
121831
Euchner
121831 Euchner - Evaluation module and bus module MGB-L1...-PN (guard locking by spring force) with ...
Weight7.5949159 lb
SeriesSpare parts
Product ClassAccessories
Safety Integrity LevelSIL 3 (EN 62061:2005)
Mission time20
PFHD4.07 x 10⁻⁸ (Fixed failure ...
Performance LevelPL e
Category4
Diagnostic Coverage (DC)99
Product version numberV3.30.10
Additional featureIncl. cover set ID. No. 1203...
Switching element1NO
Fusingmin.1 A Slow blow
Bus data protocolProfinet (IEC 61158 type 10)
Assignment diagramB1
Safety data protocolProfisafe (IEC 61784-3-3)
VersionIlluminated push buttons
Assured release distance Sarmax.65 mm
Auxiliary voltage DC24 V DC -15% ... +10% (Th...
Operating voltage DC24 V DC -15% ... 10% ((Re...
Connecting cableProfinet I/O cable, at least...
Degree of contamination (external, according to EN 60947-1)3
EMC protection requirementsIn accordance with EN 61000-...
Transponder codingUnicode
Safety classIII
Rated insulation voltage Ui75 V
Maximum feed-in current in the connection blockmax.4000 mA
Current consumptionmax.500 mA
Rated impulse withstand voltage Uimp0,5 kV
Locking force FZh2000 N
Guard locking principleClosed-circuit current princ...
Mechanical life0,1 x 10⁶
Reaction timemax.550 ms Switch-off time...
Installation orientationDoor hinge DIN right
ConnectionPush-pull power (X1 (The do...
Housing materialReinforced plastic, die-cast...
Ambient temperature-20 ... 55 °C
Switching frequency0,25 Hz
Degree of protectionIP54
Shock and vibration resistanceIn acc. with EN 60947-5-3
For the approval acc. to UL the following applies-
Repeat accuracy R-
Discrepancy time-
Output voltage-
Turn-on time-
Off-state current Ir-
Switching current-
Type of output-
Switching load-
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Connection rating-
Solenoid operating voltage DC-
Utilization category acc. to EN 60947-5-2-
Test pulses-
Test-pulse interval-
Actuating force-
Extension of risk time according to EN 60947-5-3 per device-
Extraction force-
Overtravel-
Locking force Fmax-
Approach speed-
Retention force-
Ready delay-
B10D-
Operating current-
Detent mechanism-
Operating voltage-
122813
Euchner
122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release
Weight1.763696 lb
SeriesCTP-AR
Product ClassSafety System
Safety Integrity Level-
Mission time20 y
PFHD4.1 x 10 ⁻⁹
Performance LevelPL e
Category4
Diagnostic Coverage (DC)-
Product version number-
Additional featureEscape release actuated by p...
Switching element-
Fusing0,25 ... 8 A
Bus data protocol-
Assignment diagram-
Safety data protocol-
Version-
Assured release distance Sar-
Auxiliary voltage DC-
Operating voltage DC24 V DC -15% ... 15% Rev...
Connecting cable-
Degree of contamination (external, according to EN 60947-1)3
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Transponder coding-
Safety classIII
Rated insulation voltage Ui50 V
Maximum feed-in current in the connection block-
Current consumption40 mA
Rated impulse withstand voltage Uimp0,5 kV
Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...
Guard locking principleClosed-circuit current princ...
Mechanical life1 x 10⁶
Reaction time-
Installation orientationAny
Connection2 plug connectors M12, 5 and...
Housing materialDie-cast zinc
Ambient temperature-20 ... +55 °C
Switching frequencymax.0,5 Hz
Degree of protectionIP67/IP69/IP69K (Screwed ti...
Shock and vibration resistanceIn acc. with EN 60947-5-3
For the approval acc. to UL the following appliesOperation only with UL class...
Repeat accuracy R10 %
Discrepancy timemax.10 ms In acc. with EN ...
Output voltage0,8xUB ... UB V DC
Turn-on timemax.400 ms
Off-state current Irmax.0,25 mA
Switching current1 ... 50 mA
Type of outputp-switching, short circuit-p...
Switching load24V DC, class 2 (Alternativ...
Risk time according to EN 60947-5-3max.260 ms
Solenoid duty cycle100 %
Connection rating6 W
Solenoid operating voltage DC24 V DC -15% ... +10% Re...
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Test pulsesmax.1,0 ms (Applies for a l...
Test-pulse intervalmin.140 ms
Actuating force10 N
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Extraction force20 N
Overtravel5 mm
Locking force Fmax3900 N
Approach speedmax.20 m/min
Retention force20 N
Ready delay8 s
B10D-
Operating current-
Detent mechanism-
Operating voltage-
Weight3.968316 lb
SeriesMGBS-P-I-AP
Product ClassSafety System
Safety Integrity Level-
Mission time20 y
PFHD4.1 x 10 ⁻⁹
Performance LevelPL e
Category4
Diagnostic Coverage (DC)-
Product version number-
Additional feature-
Switching element2 pos. driven NC
Fusing0,25 ... 8 A
Bus data protocol-
Assignment diagram-
Safety data protocol-
VersionEmergency stop
Assured release distance Sar-
Auxiliary voltage DC-
Operating voltage DC24 V DC -15% ... 15% Rev...
Connecting cable-
Degree of contamination (external, according to EN 60947-1)3
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Transponder coding-
Safety classIII
Rated insulation voltage Ui50 V
Maximum feed-in current in the connection block-
Current consumption40 mA
Rated impulse withstand voltage Uimp0,5 kV
Locking force FZh-
Guard locking principle-
Mechanical life1 x 10⁶
Reaction time-
Installation orientationDoor hinge DIN right
Connection2 plug connectors M12, 5-pin
Housing materialFiber glass reinforced therm...
Ambient temperature-20 ... +55 °C
Switching frequencymax.0,5 Hz
Degree of protectionIP65 (Screwed tight plug co...
Shock and vibration resistanceIn acc. with EN 60947-5-3
For the approval acc. to UL the following appliesOperation only with UL class...
Repeat accuracy R10 %
Discrepancy timemax.10 ms In acc. with EN ...
Output voltage0 ... 1 V DC
Turn-on timemax.400 ms
Off-state current Irmax.0,25 mA
Switching current1 ... 150 mA
Type of output2 semiconductor outputs, p-s...
Switching load24V DC, class 2 (Alternativ...
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Connection rating1 W
Solenoid operating voltage DC-
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Test pulsesmax.0,3 ms (Applies for a l...
Test-pulse intervalmin.100 ms
Actuating force10 N
Extension of risk time according to EN 60947-5-3 per device-
Extraction force20 N
Overtravel5 mm
Locking force Fmax-
Approach speedmax.20 m/min
Retention force-
Ready delaymax.1 s
B10D0,13 x 10⁶
Operating current1 ... 100 mA
Detent mechanismSnap-in bolt
Operating voltage5 ... 24 V
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 121831?
The price of 121831 on MQ Automation is $2,826.20. Order now.
Out if stock but available for backorder.
121831 Euchner - Evaluation module and bus module MGB-L1...-PN (guard locking by spring force) with 2 control elements, push-pull plug
Similar products from: Safety Accessories
What can I help you find today?
