121846 Euchner Safety Accessories

121846 on MQ Automation
Euchner
  • 121846
  • 121846

Part#:121846

Alt. Part#:MGB-L1B-PNA-L-121846

Manufacturer:Euchner

Category:Safety Accessories

Product Lifecycle:Active

Product description

121846 Euchner - Evaluation module and bus module MGB-L1...-PN (guard locking by spring force) with 3 control elements, push-pull plug

Product Details

  • Weight
    7.495708 lb
  • Series
    Spare parts
  • Product Class
    Accessories
  • B10D
    0,13 x 10⁶
  • PFHD
    4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
  • Performance Level
    PL e
  • Mission time
    20
  • Diagnostic Coverage (DC)
    99
  • Safety Integrity Level
    SIL 3 (EN 62061:2005)
  • Category
    4
  • Product version number
    V3.30.10
  • Additional feature
    Incl. cover set ID. No. 120344
  • Bus data protocol
    Profinet (IEC 61158 type 10)
  • Assured release distance Sar
    max.65 mm
  • Version
    Emergency stop illuminated
  • Safety data protocol
    Profisafe (IEC 61784-3-3)
  • Switching element
    2 pos. driven NC
  • Assignment diagram
    B3
  • Auxiliary voltage DC
    24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
  • Operating voltage DC
    24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Safety class
    III
  • Fusing
    min.1 A Slow blow
  • Transponder coding
    Unicode
  • Connecting cable
    Profinet I/O cable, at least cat. 5e
  • EMC protection requirements
    In accordance with EN 61000-4 and EN 61326-3-1
  • Connection
    Push-pull power (X1 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
  • Maximum feed-in current in the connection block
    max.4000 mA
  • Rated impulse withstand voltage Uimp
    0,5 kV
  • Current consumption
    max.500 mA
  • Locking force FZh
    2000 N
  • Switching frequency
    0,25 Hz
  • Guard locking principle
    Closed-circuit current principle
  • Rated insulation voltage Ui
    75 V
  • Reaction time
    max.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
  • Ambient temperature
    -20 ... 55 °C
  • Installation orientation
    Door hinge DIN left
  • Mechanical life
    0,1 x 10⁶
  • Degree of protection
    IP54
  • Weight
    3,1 kg
  • Housing material
    Reinforced plastic, die-cast zinc nickel-plated, stainless steel
  • Shock and vibration resistance
    In acc. with EN 60947-5-3

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 121846 on MQ Automation is $2,930.28. Order now.


About the product

Guard locking with guard lock monitoring;Emergency stop according to ISO 13850, illuminated;2 illuminated pushbuttons;including adhesive labels;Push-pull plug;Pre-assembled on mounting plates;Integrated Profinet RT switch;Unicode


Manufacturer warranty

121846 Euchner

$2,930.28

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$2,930.28

$2,930.28 each

Average response time: 11 minutes

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 121846 with other products

Weight

Series

Product Class

B10D

PFHD

Performance Level

Mission time

Diagnostic Coverage (DC)

Safety Integrity Level

Category

Product version number

Additional feature

Bus data protocol

Assured release distance ...

Version

Safety data protocol

Switching element

Assignment diagram

Auxiliary voltage DC

Operating voltage DC

Degree of contamination (...

Safety class

Fusing

Transponder coding

Connecting cable

EMC protection requiremen...

Connection

Maximum feed-in current i...

Rated impulse withstand v...

Current consumption

Locking force FZh

Switching frequency

Guard locking principle

Rated insulation voltage ...

Reaction time

Ambient temperature

Installation orientation

Mechanical life

Degree of protection

Housing material

Shock and vibration resis...

For the approval acc. to ...

Operating current

Repeat accuracy R

Detent mechanism

Discrepancy time

Off-state current Ir

Operating voltage

Switching current

Type of output

Turn-on time

Switching load

Output voltage

Connection rating

Utilization category acc....

Overtravel

Test-pulse interval

Extraction force

Test pulses

Actuating force

Approach speed

Ready delay

Risk time according to EN...

Solenoid duty cycle

Solenoid operating voltag...

Extension of risk time ac...

Locking force Fmax

Retention force

Selected product

121846
0 in stock
121846
Euchner

121846 Euchner - Evaluation module and bus module MGB-L1...-PN (guard locking by spring force) with ...

Weight7.495708 lb

SeriesSpare parts

Product ClassAccessories

B10D0,13 x 10⁶

PFHD4.07 x 10⁻⁸ (Fixed failure ...

Performance LevelPL e

Mission time20

Diagnostic Coverage (DC)99

Safety Integrity LevelSIL 3 (EN 62061:2005)

Category4

Product version numberV3.30.10

Additional featureIncl. cover set ID. No. 1203...

Bus data protocolProfinet (IEC 61158 type 10)

Assured release distance Sarmax.65 mm

VersionEmergency stop illuminated

Safety data protocolProfisafe (IEC 61784-3-3)

Switching element2 pos. driven NC

Assignment diagramB3

Auxiliary voltage DC24 V DC -15% ... +10% (Th...

Operating voltage DC24 V DC -15% ... 10% ((Re...

Degree of contamination (external, according to EN 60947-1)3

Safety classIII

Fusingmin.1 A Slow blow

Transponder codingUnicode

Connecting cableProfinet I/O cable, at least...

EMC protection requirementsIn accordance with EN 61000-...

ConnectionPush-pull power (X1 (The do...

Maximum feed-in current in the connection blockmax.4000 mA

Rated impulse withstand voltage Uimp0,5 kV

Current consumptionmax.500 mA

Locking force FZh2000 N

Switching frequency0,25 Hz

Guard locking principleClosed-circuit current princ...

Rated insulation voltage Ui75 V

Reaction timemax.550 ms Switch-off time...

Ambient temperature-20 ... 55 °C

Installation orientationDoor hinge DIN left

Mechanical life0,1 x 10⁶

Degree of protectionIP54

Housing materialReinforced plastic, die-cast...

Shock and vibration resistanceIn acc. with EN 60947-5-3

For the approval acc. to UL the following applies-

Operating current-

Repeat accuracy R-

Detent mechanism-

Discrepancy time-

Off-state current Ir-

Operating voltage-

Switching current-

Type of output-

Turn-on time-

Switching load-

Output voltage-

Connection rating-

Utilization category acc. to EN 60947-5-2-

Overtravel-

Test-pulse interval-

Extraction force-

Test pulses-

Actuating force-

Approach speed-

Ready delay-

Risk time according to EN 60947-5-3-

Solenoid duty cycle-

Solenoid operating voltage DC-

Extension of risk time according to EN 60947-5-3 per device-

Locking force Fmax-

Retention force-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

B10D0,13 x 10⁶

PFHD4.1 x 10 ⁻⁹

Performance LevelPL e

Mission time20 y

Diagnostic Coverage (DC)-

Safety Integrity Level-

Category4

Product version number-

Additional feature-

Bus data protocol-

Assured release distance Sar-

VersionEmergency stop

Safety data protocol-

Switching element2 pos. driven NC

Assignment diagram-

Auxiliary voltage DC-

Operating voltage DC24 V DC -15% ... 15% Rev...

Degree of contamination (external, according to EN 60947-1)3

Safety classIII

Fusing0,25 ... 8 A

Transponder coding-

Connecting cable-

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection2 plug connectors M12, 5-pin

Maximum feed-in current in the connection block-

Rated impulse withstand voltage Uimp0,5 kV

Current consumption40 mA

Locking force FZh-

Switching frequencymax.0,5 Hz

Guard locking principle-

Rated insulation voltage Ui50 V

Reaction time-

Ambient temperature-20 ... +55 °C

Installation orientationDoor hinge DIN right

Mechanical life1 x 10⁶

Degree of protectionIP65 (Screwed tight plug co...

Housing materialFiber glass reinforced therm...

Shock and vibration resistanceIn acc. with EN 60947-5-3

For the approval acc. to UL the following appliesOperation only with UL class...

Operating current1 ... 100 mA

Repeat accuracy R10 %

Detent mechanismSnap-in bolt

Discrepancy timemax.10 ms In acc. with EN ...

Off-state current Irmax.0,25 mA

Operating voltage5 ... 24 V

Switching current1 ... 150 mA

Type of output2 semiconductor outputs, p-s...

Turn-on timemax.400 ms

Switching load24V DC, class 2 (Alternativ...

Output voltage0 ... 1 V DC

Connection rating1 W

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Overtravel5 mm

Test-pulse intervalmin.100 ms

Extraction force20 N

Test pulsesmax.0,3 ms (Applies for a l...

Actuating force10 N

Approach speedmax.20 m/min

Ready delaymax.1 s

Risk time according to EN 60947-5-3-

Solenoid duty cycle-

Solenoid operating voltage DC-

Extension of risk time according to EN 60947-5-3 per device-

Locking force Fmax-

Retention force-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

B10D-

PFHD4.1 x 10 ⁻⁹

Performance LevelPL e

Mission time20 y

Diagnostic Coverage (DC)-

Safety Integrity Level-

Category4

Product version number-

Additional featureEscape release actuated by p...

Bus data protocol-

Assured release distance Sar-

Version-

Safety data protocol-

Switching element-

Assignment diagram-

Auxiliary voltage DC-

Operating voltage DC24 V DC -15% ... 15% Rev...

Degree of contamination (external, according to EN 60947-1)3

Safety classIII

Fusing0,25 ... 8 A

Transponder coding-

Connecting cable-

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection2 plug connectors M12, 5 and...

Maximum feed-in current in the connection block-

Rated impulse withstand voltage Uimp0,5 kV

Current consumption40 mA

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Switching frequencymax.0,5 Hz

Guard locking principleClosed-circuit current princ...

Rated insulation voltage Ui50 V

Reaction time-

Ambient temperature-20 ... +55 °C

Installation orientationAny

Mechanical life1 x 10⁶

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Housing materialDie-cast zinc

Shock and vibration resistanceIn acc. with EN 60947-5-3

For the approval acc. to UL the following appliesOperation only with UL class...

Operating current-

Repeat accuracy R10 %

Detent mechanism-

Discrepancy timemax.10 ms In acc. with EN ...

Off-state current Irmax.0,25 mA

Operating voltage-

Switching current1 ... 50 mA

Type of outputp-switching, short circuit-p...

Turn-on timemax.400 ms

Switching load24V DC, class 2 (Alternativ...

Output voltage0,8xUB ... UB V DC

Connection rating6 W

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Overtravel5 mm

Test-pulse intervalmin.140 ms

Extraction force20 N

Test pulsesmax.1,0 ms (Applies for a l...

Actuating force10 N

Approach speedmax.20 m/min

Ready delay8 s

Risk time according to EN 60947-5-3max.260 ms

Solenoid duty cycle100 %

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Locking force Fmax3900 N

Retention force20 N

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

Relevant products

FAQ

What is the price of 121846?
The price of 121846 on MQ Automation is $2,930.28. Order now.

Out if stock but available for backorder.

121846 Euchner - Evaluation module and bus module MGB-L1...-PN (guard locking by spring force) with 3 control elements, push-pull plug

What can I help you find today?

Recommended parts