121842 Euchner Safety Accessories
Part#:121842
Alt. Part#:MGB-L1B-PNA-R-121842
Manufacturer:Euchner
Category:Safety Accessories
Product Lifecycle:Active
Product description
121842 Euchner - Evaluation module and bus module MGB-L1...-PN (guard locking by spring force) with 3 control elements, push-pull plug
Product Details
- Weight 7.54200502 lb
- Series Spare parts
- Product Class Accessories
- Mission time 20
- Safety Integrity Level SIL 3 (EN 62061:2005)
- B10D 0,13 x 10⁶
- Diagnostic Coverage (DC) 99
- PFHD 4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
- Performance Level PL e
- Category 4
- Product version number V3.30.10
- Additional feature Incl. cover set ID. No. 120344
- Switching element 2 pos. driven NC
- Version Emergency stop illuminated
- Assignment diagram B3
- Safety data protocol Profisafe (IEC 61784-3-3)
- Bus data protocol Profinet (IEC 61158 type 10)
- Assured release distance Sar max.65 mm
- Auxiliary voltage DC 24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
- Fusing min.1 A Slow blow
- Safety class III
- Operating voltage DC 24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
- Degree of contamination (external, according to EN 60947-1) 3
- Transponder coding Unicode
- Connecting cable Profinet I/O cable, at least cat. 5e
- EMC protection requirements In accordance with EN 61000-4 and EN 61326-3-1
- Rated insulation voltage Ui 75 V
- Maximum feed-in current in the connection block max.4000 mA
- Rated impulse withstand voltage Uimp 0,5 kV
- Current consumption max.500 mA
- Guard locking principle Closed-circuit current principle
- Connection Push-pull RJ45 (X4 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
- Locking force FZh 2000 N
- Switching frequency 0,25 Hz
- Reaction time max.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
- Installation orientation Door hinge DIN right
- Mechanical life 0,1 x 10⁶
- Degree of protection IP54
- Weight 3,1 kg
- Shock and vibration resistance In acc. with EN 60947-5-3
- Housing material Reinforced plastic, die-cast zinc nickel-plated, stainless steel
- Ambient temperature -20 ... 55 °C
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 121842 on MQ Automation is $2,930.28. Order now.
About the product
Guard locking with guard lock monitoring;Emergency stop according to ISO 13850, illuminated;2 illuminated pushbuttons;including adhesive labels;Push-pull plug;Pre-assembled on mounting plates;Integrated Profinet RT switch;Unicode
Manufacturer warranty
121842 Euchner
$2,930.28
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$2,930.28
$2,930.28 each
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 121842 with other products
Weight
Series
Product Class
Mission time
Safety Integrity Level
B10D
Diagnostic Coverage (DC)
PFHD
Performance Level
Category
Product version number
Additional feature
Switching element
Version
Assignment diagram
Safety data protocol
Bus data protocol
Assured release distance ...
Auxiliary voltage DC
Fusing
Safety class
Operating voltage DC
Degree of contamination (...
Transponder coding
Connecting cable
EMC protection requiremen...
Rated insulation voltage ...
Maximum feed-in current i...
Rated impulse withstand v...
Current consumption
Guard locking principle
Connection
Locking force FZh
Switching frequency
Reaction time
Installation orientation
Mechanical life
Degree of protection
Shock and vibration resis...
Housing material
Ambient temperature
For the approval acc. to ...
Operating current
Repeat accuracy R
Detent mechanism
Discrepancy time
Off-state current Ir
Operating voltage
Switching current
Type of output
Turn-on time
Switching load
Output voltage
Connection rating
Utilization category acc....
Overtravel
Test-pulse interval
Extraction force
Test pulses
Actuating force
Approach speed
Ready delay
Risk time according to EN...
Solenoid duty cycle
Solenoid operating voltag...
Extension of risk time ac...
Locking force Fmax
Retention force
Selected product
121842
Euchner
121842 Euchner - Evaluation module and bus module MGB-L1...-PN (guard locking by spring force) with ...
Weight7.54200502 lb
SeriesSpare parts
Product ClassAccessories
Mission time20
Safety Integrity LevelSIL 3 (EN 62061:2005)
B10D0,13 x 10⁶
Diagnostic Coverage (DC)99
PFHD4.07 x 10⁻⁸ (Fixed failure ...
Performance LevelPL e
Category4
Product version numberV3.30.10
Additional featureIncl. cover set ID. No. 1203...
Switching element2 pos. driven NC
VersionEmergency stop illuminated
Assignment diagramB3
Safety data protocolProfisafe (IEC 61784-3-3)
Bus data protocolProfinet (IEC 61158 type 10)
Assured release distance Sarmax.65 mm
Auxiliary voltage DC24 V DC -15% ... +10% (Th...
Fusingmin.1 A Slow blow
Safety classIII
Operating voltage DC24 V DC -15% ... 10% ((Re...
Degree of contamination (external, according to EN 60947-1)3
Transponder codingUnicode
Connecting cableProfinet I/O cable, at least...
EMC protection requirementsIn accordance with EN 61000-...
Rated insulation voltage Ui75 V
Maximum feed-in current in the connection blockmax.4000 mA
Rated impulse withstand voltage Uimp0,5 kV
Current consumptionmax.500 mA
Guard locking principleClosed-circuit current princ...
ConnectionPush-pull RJ45 (X4 (The doc...
Locking force FZh2000 N
Switching frequency0,25 Hz
Reaction timemax.550 ms Switch-off time...
Installation orientationDoor hinge DIN right
Mechanical life0,1 x 10⁶
Degree of protectionIP54
Shock and vibration resistanceIn acc. with EN 60947-5-3
Housing materialReinforced plastic, die-cast...
Ambient temperature-20 ... 55 °C
For the approval acc. to UL the following applies-
Operating current-
Repeat accuracy R-
Detent mechanism-
Discrepancy time-
Off-state current Ir-
Operating voltage-
Switching current-
Type of output-
Turn-on time-
Switching load-
Output voltage-
Connection rating-
Utilization category acc. to EN 60947-5-2-
Overtravel-
Test-pulse interval-
Extraction force-
Test pulses-
Actuating force-
Approach speed-
Ready delay-
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
Weight3.968316 lb
SeriesMGBS-P-I-AP
Product ClassSafety System
Mission time20 y
Safety Integrity Level-
B10D0,13 x 10⁶
Diagnostic Coverage (DC)-
PFHD4.1 x 10 ⁻⁹
Performance LevelPL e
Category4
Product version number-
Additional feature-
Switching element2 pos. driven NC
VersionEmergency stop
Assignment diagram-
Safety data protocol-
Bus data protocol-
Assured release distance Sar-
Auxiliary voltage DC-
Fusing0,25 ... 8 A
Safety classIII
Operating voltage DC24 V DC -15% ... 15% Rev...
Degree of contamination (external, according to EN 60947-1)3
Transponder coding-
Connecting cable-
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Rated insulation voltage Ui50 V
Maximum feed-in current in the connection block-
Rated impulse withstand voltage Uimp0,5 kV
Current consumption40 mA
Guard locking principle-
Connection2 plug connectors M12, 5-pin
Locking force FZh-
Switching frequencymax.0,5 Hz
Reaction time-
Installation orientationDoor hinge DIN right
Mechanical life1 x 10⁶
Degree of protectionIP65 (Screwed tight plug co...
Shock and vibration resistanceIn acc. with EN 60947-5-3
Housing materialFiber glass reinforced therm...
Ambient temperature-20 ... +55 °C
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current1 ... 100 mA
Repeat accuracy R10 %
Detent mechanismSnap-in bolt
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage5 ... 24 V
Switching current1 ... 150 mA
Type of output2 semiconductor outputs, p-s...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0 ... 1 V DC
Connection rating1 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.100 ms
Extraction force20 N
Test pulsesmax.0,3 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delaymax.1 s
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
122813
Euchner
122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release
Weight1.763696 lb
SeriesCTP-AR
Product ClassSafety System
Mission time20 y
Safety Integrity Level-
B10D-
Diagnostic Coverage (DC)-
PFHD4.1 x 10 ⁻⁹
Performance LevelPL e
Category4
Product version number-
Additional featureEscape release actuated by p...
Switching element-
Version-
Assignment diagram-
Safety data protocol-
Bus data protocol-
Assured release distance Sar-
Auxiliary voltage DC-
Fusing0,25 ... 8 A
Safety classIII
Operating voltage DC24 V DC -15% ... 15% Rev...
Degree of contamination (external, according to EN 60947-1)3
Transponder coding-
Connecting cable-
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Rated insulation voltage Ui50 V
Maximum feed-in current in the connection block-
Rated impulse withstand voltage Uimp0,5 kV
Current consumption40 mA
Guard locking principleClosed-circuit current princ...
Connection2 plug connectors M12, 5 and...
Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...
Switching frequencymax.0,5 Hz
Reaction time-
Installation orientationAny
Mechanical life1 x 10⁶
Degree of protectionIP67/IP69/IP69K (Screwed ti...
Shock and vibration resistanceIn acc. with EN 60947-5-3
Housing materialDie-cast zinc
Ambient temperature-20 ... +55 °C
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current-
Repeat accuracy R10 %
Detent mechanism-
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage-
Switching current1 ... 50 mA
Type of outputp-switching, short circuit-p...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0,8xUB ... UB V DC
Connection rating6 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.140 ms
Extraction force20 N
Test pulsesmax.1,0 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delay8 s
Risk time according to EN 60947-5-3max.260 ms
Solenoid duty cycle100 %
Solenoid operating voltage DC24 V DC -15% ... +10% Re...
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Locking force Fmax3900 N
Retention force20 N
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 121842?
The price of 121842 on MQ Automation is $2,930.28. Order now.
Out if stock but available for backorder.
121842 Euchner - Evaluation module and bus module MGB-L1...-PN (guard locking by spring force) with 3 control elements, push-pull plug
Similar products from: Safety Accessories
What can I help you find today?
