117024 Euchner Safety Accessories
Part#:117024
Alt. Part#:MGB-L2B-PNC-R-117024
Manufacturer:Euchner
Category:Safety Accessories
Product Lifecycle:Active
Product description
117024 Euchner - Evaluation module and bus module MGB-L2...-PN... (guard locking by solenoid force) with 4 control elements, push-pull plug, RC12
Product Details
- Weight 7.5508235 lb
- Series Spare parts
- Product Class Accessories
- B10D 0,13 x 10⁶
- Mission time 20
- Diagnostic Coverage (DC) 99
- PFHD 4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
- Safety Integrity Level SIL 3 (EN 62061:2005)
- Product version number V3.30.11
- Performance Level PL e
- Category 4
- Switching element 1NO
- Color white
- Bus data protocol Profinet (IEC 61158 type 10)
- Assignment diagram B1
- Special features Printed
- Version Illuminated push buttons
- Assured release distance Sar max.65 mm
- Safety data protocol Profisafe (IEC 61784-3-3)
- Fusing min.1 A Slow blow
- Auxiliary voltage DC 24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
- Operating voltage DC 24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
- Transponder coding Multicode
- Connecting cable Profinet I/O cable, at least cat. 5e
- Degree of contamination (external, according to EN 60947-1) 3
- Safety class III
- Maximum feed-in current in the connection block max.4000 mA
- EMC protection requirements In accordance with EN 61000-4 and EN 61326-3-1
- Rated impulse withstand voltage Uimp 0,5 kV
- Locking force FZh 2000 N
- Ambient temperature -20 ... 55 °C
- Degree of protection IP54
- Current consumption max.500 mA
- Rated insulation voltage Ui 75 V
- Guard locking principle Open-circuit current principle
- Housing material Reinforced plastic, die-cast zinc nickel-plated, stainless steel
- Connection Push-pull RJ45 (X4 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
- Weight 3,1 kg
- Shock and vibration resistance In acc. with EN 60947-5-3
- Installation orientation Door hinge DIN right
- Mechanical life 0,1 x 10⁶
- Reaction time max.250 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
- Switching frequency 0,25 Hz
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 117024 on MQ Automation is $3,031.32. Order now.
About the product
Guard locking with guard lock monitoring;Emergency stop according to ISO 13850, illuminated;3 illuminated pushbuttons with symbol;Push-pull plug;including terminal plug for enabling switch (RC12, 12-pin);Pre-assembled on mounting plates;Multicode
Manufacturer warranty
117024 Euchner
$3,031.32
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$3,031.32
$3,031.32 each
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 117024 with other products
Weight
Series
Product Class
B10D
Mission time
Diagnostic Coverage (DC)
PFHD
Safety Integrity Level
Product version number
Performance Level
Category
Switching element
Color
Bus data protocol
Assignment diagram
Special features
Version
Assured release distance ...
Safety data protocol
Fusing
Auxiliary voltage DC
Operating voltage DC
Transponder coding
Connecting cable
Degree of contamination (...
Safety class
Maximum feed-in current i...
EMC protection requiremen...
Rated impulse withstand v...
Locking force FZh
Ambient temperature
Degree of protection
Current consumption
Rated insulation voltage ...
Guard locking principle
Housing material
Connection
Shock and vibration resis...
Installation orientation
Mechanical life
Reaction time
Switching frequency
For the approval acc. to ...
Operating current
Repeat accuracy R
Detent mechanism
Discrepancy time
Off-state current Ir
Operating voltage
Switching current
Type of output
Turn-on time
Switching load
Output voltage
Connection rating
Utilization category acc....
Overtravel
Test-pulse interval
Extraction force
Test pulses
Actuating force
Approach speed
Ready delay
Additional feature
Risk time according to EN...
Solenoid duty cycle
Solenoid operating voltag...
Extension of risk time ac...
Locking force Fmax
Retention force
Selected product
117024
Euchner
117024 Euchner - Evaluation module and bus module MGB-L2...-PN... (guard locking by solenoid force) ...
Weight7.5508235 lb
SeriesSpare parts
Product ClassAccessories
B10D0,13 x 10⁶
Mission time20
Diagnostic Coverage (DC)99
PFHD4.07 x 10⁻⁸ (Fixed failure ...
Safety Integrity LevelSIL 3 (EN 62061:2005)
Product version numberV3.30.11
Performance LevelPL e
Category4
Switching element1NO
Colorwhite
Bus data protocolProfinet (IEC 61158 type 10)
Assignment diagramB1
Special featuresPrinted
VersionIlluminated push buttons
Assured release distance Sarmax.65 mm
Safety data protocolProfisafe (IEC 61784-3-3)
Fusingmin.1 A Slow blow
Auxiliary voltage DC24 V DC -15% ... +10% (Th...
Operating voltage DC24 V DC -15% ... 10% ((Re...
Transponder codingMulticode
Connecting cableProfinet I/O cable, at least...
Degree of contamination (external, according to EN 60947-1)3
Safety classIII
Maximum feed-in current in the connection blockmax.4000 mA
EMC protection requirementsIn accordance with EN 61000-...
Rated impulse withstand voltage Uimp0,5 kV
Locking force FZh2000 N
Ambient temperature-20 ... 55 °C
Degree of protectionIP54
Current consumptionmax.500 mA
Rated insulation voltage Ui75 V
Guard locking principleOpen-circuit current princip...
Housing materialReinforced plastic, die-cast...
ConnectionPush-pull RJ45 (X4 (The doc...
Shock and vibration resistanceIn acc. with EN 60947-5-3
Installation orientationDoor hinge DIN right
Mechanical life0,1 x 10⁶
Reaction timemax.250 ms Switch-off time...
Switching frequency0,25 Hz
For the approval acc. to UL the following applies-
Operating current-
Repeat accuracy R-
Detent mechanism-
Discrepancy time-
Off-state current Ir-
Operating voltage-
Switching current-
Type of output-
Turn-on time-
Switching load-
Output voltage-
Connection rating-
Utilization category acc. to EN 60947-5-2-
Overtravel-
Test-pulse interval-
Extraction force-
Test pulses-
Actuating force-
Approach speed-
Ready delay-
Additional feature-
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
Weight3.968316 lb
SeriesMGBS-P-I-AP
Product ClassSafety System
B10D0,13 x 10⁶
Mission time20 y
Diagnostic Coverage (DC)-
PFHD4.1 x 10 ⁻⁹
Safety Integrity Level-
Product version number-
Performance LevelPL e
Category4
Switching element2 pos. driven NC
Color-
Bus data protocol-
Assignment diagram-
Special features-
VersionEmergency stop
Assured release distance Sar-
Safety data protocol-
Fusing0,25 ... 8 A
Auxiliary voltage DC-
Operating voltage DC24 V DC -15% ... 15% Rev...
Transponder coding-
Connecting cable-
Degree of contamination (external, according to EN 60947-1)3
Safety classIII
Maximum feed-in current in the connection block-
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Rated impulse withstand voltage Uimp0,5 kV
Locking force FZh-
Ambient temperature-20 ... +55 °C
Degree of protectionIP65 (Screwed tight plug co...
Current consumption40 mA
Rated insulation voltage Ui50 V
Guard locking principle-
Housing materialFiber glass reinforced therm...
Connection2 plug connectors M12, 5-pin
Shock and vibration resistanceIn acc. with EN 60947-5-3
Installation orientationDoor hinge DIN right
Mechanical life1 x 10⁶
Reaction time-
Switching frequencymax.0,5 Hz
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current1 ... 100 mA
Repeat accuracy R10 %
Detent mechanismSnap-in bolt
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage5 ... 24 V
Switching current1 ... 150 mA
Type of output2 semiconductor outputs, p-s...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0 ... 1 V DC
Connection rating1 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.100 ms
Extraction force20 N
Test pulsesmax.0,3 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delaymax.1 s
Additional feature-
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
122813
Euchner
122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release
Weight1.763696 lb
SeriesCTP-AR
Product ClassSafety System
B10D-
Mission time20 y
Diagnostic Coverage (DC)-
PFHD4.1 x 10 ⁻⁹
Safety Integrity Level-
Product version number-
Performance LevelPL e
Category4
Switching element-
Color-
Bus data protocol-
Assignment diagram-
Special features-
Version-
Assured release distance Sar-
Safety data protocol-
Fusing0,25 ... 8 A
Auxiliary voltage DC-
Operating voltage DC24 V DC -15% ... 15% Rev...
Transponder coding-
Connecting cable-
Degree of contamination (external, according to EN 60947-1)3
Safety classIII
Maximum feed-in current in the connection block-
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Rated impulse withstand voltage Uimp0,5 kV
Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...
Ambient temperature-20 ... +55 °C
Degree of protectionIP67/IP69/IP69K (Screwed ti...
Current consumption40 mA
Rated insulation voltage Ui50 V
Guard locking principleClosed-circuit current princ...
Housing materialDie-cast zinc
Connection2 plug connectors M12, 5 and...
Shock and vibration resistanceIn acc. with EN 60947-5-3
Installation orientationAny
Mechanical life1 x 10⁶
Reaction time-
Switching frequencymax.0,5 Hz
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current-
Repeat accuracy R10 %
Detent mechanism-
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage-
Switching current1 ... 50 mA
Type of outputp-switching, short circuit-p...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0,8xUB ... UB V DC
Connection rating6 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.140 ms
Extraction force20 N
Test pulsesmax.1,0 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delay8 s
Additional featureEscape release actuated by p...
Risk time according to EN 60947-5-3max.260 ms
Solenoid duty cycle100 %
Solenoid operating voltage DC24 V DC -15% ... +10% Re...
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Locking force Fmax3900 N
Retention force20 N
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 117024?
The price of 117024 on MQ Automation is $3,031.32. Order now.
Out if stock but available for backorder.
117024 Euchner - Evaluation module and bus module MGB-L2...-PN... (guard locking by solenoid force) with 4 control elements, push-pull plug, RC12
Similar products from: Safety Accessories
What can I help you find today?
