117020 Euchner Safety Accessories
Part#:117020
Alt. Part#:MGB-L1B-PNC-R-117020
Manufacturer:Euchner
Category:Safety Accessories
Product Lifecycle:Active
Product description
117020 Euchner - Evaluation module and bus module MGB-L1...-PN... (guard locking by spring force) with 4 control elements, push-pull plug, RC12
Product Details
- Weight 7.71837462 lb
- Series Spare parts
- Product Class Accessories
- Mission time 20
- Safety Integrity Level SIL 3 (EN 62061:2005)
- B10D 0,13 x 10⁶
- PFHD 4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
- Product version number V3.30.11
- Performance Level PL e
- Diagnostic Coverage (DC) 99
- Category 4
- Switching element 1NO
- Color white
- Special features Printed
- Safety data protocol Profisafe (IEC 61784-3-3)
- Version Illuminated push buttons
- Assignment diagram B1
- Bus data protocol Profinet (IEC 61158 type 10)
- Assured release distance Sar max.65 mm
- Fusing min.1 A Slow blow
- Auxiliary voltage DC 24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
- Degree of contamination (external, according to EN 60947-1) 3
- Transponder coding Multicode
- Operating voltage DC 24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
- Connecting cable Profinet I/O cable, at least cat. 5e
- Safety class III
- EMC protection requirements In accordance with EN 61000-4 and EN 61326-3-1
- Maximum feed-in current in the connection block max.4000 mA
- Mechanical life 0,1 x 10⁶
- Rated impulse withstand voltage Uimp 0,5 kV
- Rated insulation voltage Ui 75 V
- Weight 3,1 kg
- Switching frequency 0,25 Hz
- Degree of protection IP54
- Installation orientation Door hinge DIN right
- Ambient temperature -20 ... 55 °C
- Locking force FZh 2000 N
- Current consumption max.500 mA
- Reaction time max.250 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
- Shock and vibration resistance In acc. with EN 60947-5-3
- Guard locking principle Closed-circuit current principle
- Connection Push-pull RJ45 (X4 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
- Housing material Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 117020 on MQ Automation is $3,031.32. Order now.
About the product
Guard locking with guard lock monitoring;Emergency stop according to ISO 13850, illuminated;3 illuminated pushbuttons with symbol;Push-pull plug;including terminal plug for enabling switch (RC12, 12-pin);Pre-assembled on mounting plates;Multicode
Manufacturer warranty
117020 Euchner
$3,031.32
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$3,031.32
$3,031.32 each
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 117020 with other products
Weight
Series
Product Class
Mission time
Safety Integrity Level
B10D
PFHD
Product version number
Performance Level
Diagnostic Coverage (DC)
Category
Switching element
Color
Special features
Safety data protocol
Version
Assignment diagram
Bus data protocol
Assured release distance ...
Fusing
Auxiliary voltage DC
Degree of contamination (...
Transponder coding
Operating voltage DC
Connecting cable
Safety class
EMC protection requiremen...
Maximum feed-in current i...
Mechanical life
Rated impulse withstand v...
Rated insulation voltage ...
Switching frequency
Degree of protection
Installation orientation
Ambient temperature
Locking force FZh
Current consumption
Reaction time
Shock and vibration resis...
Guard locking principle
Connection
Housing material
For the approval acc. to ...
Operating current
Repeat accuracy R
Detent mechanism
Discrepancy time
Off-state current Ir
Operating voltage
Switching current
Type of output
Turn-on time
Switching load
Output voltage
Connection rating
Utilization category acc....
Overtravel
Test-pulse interval
Extraction force
Test pulses
Actuating force
Approach speed
Ready delay
Additional feature
Risk time according to EN...
Solenoid duty cycle
Solenoid operating voltag...
Extension of risk time ac...
Locking force Fmax
Retention force
Selected product
117020
Euchner
117020 Euchner - Evaluation module and bus module MGB-L1...-PN... (guard locking by spring force) wi...
Weight7.71837462 lb
SeriesSpare parts
Product ClassAccessories
Mission time20
Safety Integrity LevelSIL 3 (EN 62061:2005)
B10D0,13 x 10⁶
PFHD4.07 x 10⁻⁸ (Fixed failure ...
Product version numberV3.30.11
Performance LevelPL e
Diagnostic Coverage (DC)99
Category4
Switching element1NO
Colorwhite
Special featuresPrinted
Safety data protocolProfisafe (IEC 61784-3-3)
VersionIlluminated push buttons
Assignment diagramB1
Bus data protocolProfinet (IEC 61158 type 10)
Assured release distance Sarmax.65 mm
Fusingmin.1 A Slow blow
Auxiliary voltage DC24 V DC -15% ... +10% (Th...
Degree of contamination (external, according to EN 60947-1)3
Transponder codingMulticode
Operating voltage DC24 V DC -15% ... 10% ((Re...
Connecting cableProfinet I/O cable, at least...
Safety classIII
EMC protection requirementsIn accordance with EN 61000-...
Maximum feed-in current in the connection blockmax.4000 mA
Mechanical life0,1 x 10⁶
Rated impulse withstand voltage Uimp0,5 kV
Rated insulation voltage Ui75 V
Switching frequency0,25 Hz
Degree of protectionIP54
Installation orientationDoor hinge DIN right
Ambient temperature-20 ... 55 °C
Locking force FZh2000 N
Current consumptionmax.500 mA
Reaction timemax.250 ms Switch-off time...
Shock and vibration resistanceIn acc. with EN 60947-5-3
Guard locking principleClosed-circuit current princ...
ConnectionPush-pull RJ45 (X4 (The doc...
Housing materialReinforced plastic, die-cast...
For the approval acc. to UL the following applies-
Operating current-
Repeat accuracy R-
Detent mechanism-
Discrepancy time-
Off-state current Ir-
Operating voltage-
Switching current-
Type of output-
Turn-on time-
Switching load-
Output voltage-
Connection rating-
Utilization category acc. to EN 60947-5-2-
Overtravel-
Test-pulse interval-
Extraction force-
Test pulses-
Actuating force-
Approach speed-
Ready delay-
Additional feature-
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
Weight3.968316 lb
SeriesMGBS-P-I-AP
Product ClassSafety System
Mission time20 y
Safety Integrity Level-
B10D0,13 x 10⁶
PFHD4.1 x 10 ⁻⁹
Product version number-
Performance LevelPL e
Diagnostic Coverage (DC)-
Category4
Switching element2 pos. driven NC
Color-
Special features-
Safety data protocol-
VersionEmergency stop
Assignment diagram-
Bus data protocol-
Assured release distance Sar-
Fusing0,25 ... 8 A
Auxiliary voltage DC-
Degree of contamination (external, according to EN 60947-1)3
Transponder coding-
Operating voltage DC24 V DC -15% ... 15% Rev...
Connecting cable-
Safety classIII
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Maximum feed-in current in the connection block-
Mechanical life1 x 10⁶
Rated impulse withstand voltage Uimp0,5 kV
Rated insulation voltage Ui50 V
Switching frequencymax.0,5 Hz
Degree of protectionIP65 (Screwed tight plug co...
Installation orientationDoor hinge DIN right
Ambient temperature-20 ... +55 °C
Locking force FZh-
Current consumption40 mA
Reaction time-
Shock and vibration resistanceIn acc. with EN 60947-5-3
Guard locking principle-
Connection2 plug connectors M12, 5-pin
Housing materialFiber glass reinforced therm...
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current1 ... 100 mA
Repeat accuracy R10 %
Detent mechanismSnap-in bolt
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage5 ... 24 V
Switching current1 ... 150 mA
Type of output2 semiconductor outputs, p-s...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0 ... 1 V DC
Connection rating1 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.100 ms
Extraction force20 N
Test pulsesmax.0,3 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delaymax.1 s
Additional feature-
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
122813
Euchner
122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release
Weight1.763696 lb
SeriesCTP-AR
Product ClassSafety System
Mission time20 y
Safety Integrity Level-
B10D-
PFHD4.1 x 10 ⁻⁹
Product version number-
Performance LevelPL e
Diagnostic Coverage (DC)-
Category4
Switching element-
Color-
Special features-
Safety data protocol-
Version-
Assignment diagram-
Bus data protocol-
Assured release distance Sar-
Fusing0,25 ... 8 A
Auxiliary voltage DC-
Degree of contamination (external, according to EN 60947-1)3
Transponder coding-
Operating voltage DC24 V DC -15% ... 15% Rev...
Connecting cable-
Safety classIII
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Maximum feed-in current in the connection block-
Mechanical life1 x 10⁶
Rated impulse withstand voltage Uimp0,5 kV
Rated insulation voltage Ui50 V
Switching frequencymax.0,5 Hz
Degree of protectionIP67/IP69/IP69K (Screwed ti...
Installation orientationAny
Ambient temperature-20 ... +55 °C
Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...
Current consumption40 mA
Reaction time-
Shock and vibration resistanceIn acc. with EN 60947-5-3
Guard locking principleClosed-circuit current princ...
Connection2 plug connectors M12, 5 and...
Housing materialDie-cast zinc
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current-
Repeat accuracy R10 %
Detent mechanism-
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage-
Switching current1 ... 50 mA
Type of outputp-switching, short circuit-p...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0,8xUB ... UB V DC
Connection rating6 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.140 ms
Extraction force20 N
Test pulsesmax.1,0 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delay8 s
Additional featureEscape release actuated by p...
Risk time according to EN 60947-5-3max.260 ms
Solenoid duty cycle100 %
Solenoid operating voltage DC24 V DC -15% ... +10% Re...
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Locking force Fmax3900 N
Retention force20 N
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 117020?
The price of 117020 on MQ Automation is $3,031.32. Order now.
Out if stock but available for backorder.
117020 Euchner - Evaluation module and bus module MGB-L1...-PN... (guard locking by spring force) with 4 control elements, push-pull plug, RC12
Similar products from: Safety Accessories
What can I help you find today?
