117098 Euchner Safety Accessories
Part#:117098
Alt. Part#:MGB-L1B-PNC-R-117098
Manufacturer:Euchner
Category:Safety Accessories
Product Lifecycle:Active
Product description
117098 Euchner - Evaluation module and bus module MGB-L1...-PN (guard locking by spring force) with 4 control elements, push-pull plug
Product Details
- Weight 7.7823086 lb
- Series Spare parts
- Product Class Accessories
- Safety Integrity Level SIL 3 (EN 62061:2005)
- Mission time 20
- B10D 0,13 x 10⁶
- Diagnostic Coverage (DC) 99
- PFHD 4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
- Category 4
- Performance Level PL e
- Product version number V3.30.10
- Switching element 1NO
- Version Illuminated push buttons
- Color white
- Assignment diagram B1
- Safety data protocol Profisafe (IEC 61784-3-3)
- Fusing min.1 A Slow blow
- Assured release distance Sar max.65 mm
- Bus data protocol Profinet (IEC 61158 type 10)
- Auxiliary voltage DC 24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
- Transponder coding Multicode
- Operating voltage DC 24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
- Safety class III
- Degree of contamination (external, according to EN 60947-1) 3
- Connecting cable Profinet I/O cable, at least cat. 5e
- Maximum feed-in current in the connection block max.4000 mA
- Rated impulse withstand voltage Uimp 0,5 kV
- EMC protection requirements In accordance with EN 61000-4 and EN 61326-3-1
- Rated insulation voltage Ui 75 V
- Current consumption max.500 mA
- Switching frequency 0,25 Hz
- Locking force FZh 2000 N
- Guard locking principle Closed-circuit current principle
- Installation orientation Door hinge DIN right
- Connection Push-pull power (X1 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
- Reaction time max.250 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
- Weight 3,1 kg
- Ambient temperature -20 ... 55 °C
- Degree of protection IP54
- Shock and vibration resistance In acc. with EN 60947-5-3
- Housing material Reinforced plastic, die-cast zinc nickel-plated, stainless steel
- Mechanical life 0,1 x 10⁶
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 117098 on MQ Automation is $3,052.52. Order now.
About the product
Guard locking with guard lock monitoring;Emergency stop according to ISO 13850, illuminated;3 illuminated pushbuttons;Push-pull plug;Pre-assembled on mounting plates;Integrated Profinet RT switch;Multicode
Manufacturer warranty
117098 Euchner
$3,052.52
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$3,052.52
$3,052.52 each
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 117098 with other products
Weight
Series
Product Class
Safety Integrity Level
Mission time
B10D
Diagnostic Coverage (DC)
PFHD
Category
Performance Level
Product version number
Switching element
Version
Color
Assignment diagram
Safety data protocol
Fusing
Assured release distance ...
Bus data protocol
Auxiliary voltage DC
Transponder coding
Operating voltage DC
Safety class
Degree of contamination (...
Connecting cable
Maximum feed-in current i...
Rated impulse withstand v...
EMC protection requiremen...
Rated insulation voltage ...
Current consumption
Switching frequency
Locking force FZh
Guard locking principle
Installation orientation
Connection
Reaction time
Ambient temperature
Degree of protection
Shock and vibration resis...
Housing material
Mechanical life
For the approval acc. to ...
Operating current
Repeat accuracy R
Detent mechanism
Discrepancy time
Off-state current Ir
Operating voltage
Switching current
Type of output
Turn-on time
Switching load
Output voltage
Connection rating
Utilization category acc....
Overtravel
Test-pulse interval
Extraction force
Test pulses
Actuating force
Approach speed
Ready delay
Additional feature
Risk time according to EN...
Solenoid duty cycle
Solenoid operating voltag...
Extension of risk time ac...
Locking force Fmax
Retention force
Selected product
117098
Euchner
117098 Euchner - Evaluation module and bus module MGB-L1...-PN (guard locking by spring force) with ...
Weight7.7823086 lb
SeriesSpare parts
Product ClassAccessories
Safety Integrity LevelSIL 3 (EN 62061:2005)
Mission time20
B10D0,13 x 10⁶
Diagnostic Coverage (DC)99
PFHD4.07 x 10⁻⁸ (Fixed failure ...
Category4
Performance LevelPL e
Product version numberV3.30.10
Switching element1NO
VersionIlluminated push buttons
Colorwhite
Assignment diagramB1
Safety data protocolProfisafe (IEC 61784-3-3)
Fusingmin.1 A Slow blow
Assured release distance Sarmax.65 mm
Bus data protocolProfinet (IEC 61158 type 10)
Auxiliary voltage DC24 V DC -15% ... +10% (Th...
Transponder codingMulticode
Operating voltage DC24 V DC -15% ... 10% ((Re...
Safety classIII
Degree of contamination (external, according to EN 60947-1)3
Connecting cableProfinet I/O cable, at least...
Maximum feed-in current in the connection blockmax.4000 mA
Rated impulse withstand voltage Uimp0,5 kV
EMC protection requirementsIn accordance with EN 61000-...
Rated insulation voltage Ui75 V
Current consumptionmax.500 mA
Switching frequency0,25 Hz
Locking force FZh2000 N
Guard locking principleClosed-circuit current princ...
Installation orientationDoor hinge DIN right
ConnectionPush-pull power (X1 (The do...
Reaction timemax.250 ms Switch-off time...
Ambient temperature-20 ... 55 °C
Degree of protectionIP54
Shock and vibration resistanceIn acc. with EN 60947-5-3
Housing materialReinforced plastic, die-cast...
Mechanical life0,1 x 10⁶
For the approval acc. to UL the following applies-
Operating current-
Repeat accuracy R-
Detent mechanism-
Discrepancy time-
Off-state current Ir-
Operating voltage-
Switching current-
Type of output-
Turn-on time-
Switching load-
Output voltage-
Connection rating-
Utilization category acc. to EN 60947-5-2-
Overtravel-
Test-pulse interval-
Extraction force-
Test pulses-
Actuating force-
Approach speed-
Ready delay-
Additional feature-
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
Weight3.968316 lb
SeriesMGBS-P-I-AP
Product ClassSafety System
Safety Integrity Level-
Mission time20 y
B10D0,13 x 10⁶
Diagnostic Coverage (DC)-
PFHD4.1 x 10 ⁻⁹
Category4
Performance LevelPL e
Product version number-
Switching element2 pos. driven NC
VersionEmergency stop
Color-
Assignment diagram-
Safety data protocol-
Fusing0,25 ... 8 A
Assured release distance Sar-
Bus data protocol-
Auxiliary voltage DC-
Transponder coding-
Operating voltage DC24 V DC -15% ... 15% Rev...
Safety classIII
Degree of contamination (external, according to EN 60947-1)3
Connecting cable-
Maximum feed-in current in the connection block-
Rated impulse withstand voltage Uimp0,5 kV
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Rated insulation voltage Ui50 V
Current consumption40 mA
Switching frequencymax.0,5 Hz
Locking force FZh-
Guard locking principle-
Installation orientationDoor hinge DIN right
Connection2 plug connectors M12, 5-pin
Reaction time-
Ambient temperature-20 ... +55 °C
Degree of protectionIP65 (Screwed tight plug co...
Shock and vibration resistanceIn acc. with EN 60947-5-3
Housing materialFiber glass reinforced therm...
Mechanical life1 x 10⁶
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current1 ... 100 mA
Repeat accuracy R10 %
Detent mechanismSnap-in bolt
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage5 ... 24 V
Switching current1 ... 150 mA
Type of output2 semiconductor outputs, p-s...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0 ... 1 V DC
Connection rating1 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.100 ms
Extraction force20 N
Test pulsesmax.0,3 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delaymax.1 s
Additional feature-
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
122813
Euchner
122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release
Weight1.763696 lb
SeriesCTP-AR
Product ClassSafety System
Safety Integrity Level-
Mission time20 y
B10D-
Diagnostic Coverage (DC)-
PFHD4.1 x 10 ⁻⁹
Category4
Performance LevelPL e
Product version number-
Switching element-
Version-
Color-
Assignment diagram-
Safety data protocol-
Fusing0,25 ... 8 A
Assured release distance Sar-
Bus data protocol-
Auxiliary voltage DC-
Transponder coding-
Operating voltage DC24 V DC -15% ... 15% Rev...
Safety classIII
Degree of contamination (external, according to EN 60947-1)3
Connecting cable-
Maximum feed-in current in the connection block-
Rated impulse withstand voltage Uimp0,5 kV
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Rated insulation voltage Ui50 V
Current consumption40 mA
Switching frequencymax.0,5 Hz
Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...
Guard locking principleClosed-circuit current princ...
Installation orientationAny
Connection2 plug connectors M12, 5 and...
Reaction time-
Ambient temperature-20 ... +55 °C
Degree of protectionIP67/IP69/IP69K (Screwed ti...
Shock and vibration resistanceIn acc. with EN 60947-5-3
Housing materialDie-cast zinc
Mechanical life1 x 10⁶
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current-
Repeat accuracy R10 %
Detent mechanism-
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage-
Switching current1 ... 50 mA
Type of outputp-switching, short circuit-p...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0,8xUB ... UB V DC
Connection rating6 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.140 ms
Extraction force20 N
Test pulsesmax.1,0 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delay8 s
Additional featureEscape release actuated by p...
Risk time according to EN 60947-5-3max.260 ms
Solenoid duty cycle100 %
Solenoid operating voltage DC24 V DC -15% ... +10% Re...
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Locking force Fmax3900 N
Retention force20 N
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 117098?
The price of 117098 on MQ Automation is $3,052.52. Order now.
Out if stock but available for backorder.
117098 Euchner - Evaluation module and bus module MGB-L1...-PN (guard locking by spring force) with 4 control elements, push-pull plug
Similar products from: Safety Accessories
What can I help you find today?
