117099 Euchner Safety Accessories
Part#:117099
Alt. Part#:MGB-L1B-PNC-L-117099
Manufacturer:Euchner
Category:Safety Accessories
Product Lifecycle:Active
Product description
117099 Euchner - Evaluation module and bus module MGB-L1...-PN (guard locking by spring force) with 4 control elements, push-pull plug
Product Details
- Weight 7.826401 lb
- Series Spare parts
- Product Class Accessories
- Mission time 20
- Diagnostic Coverage (DC) 99
- Performance Level PL e
- Safety Integrity Level SIL 3 (EN 62061:2005)
- PFHD 4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
- B10D 0,13 x 10⁶
- Category 4
- Product version number V3.30.10
- Color white
- Switching element 1NO
- Assignment diagram B1
- Version Illuminated push buttons
- Safety data protocol Profisafe (IEC 61784-3-3)
- Bus data protocol Profinet (IEC 61158 type 10)
- Assured release distance Sar max.65 mm
- Degree of contamination (external, according to EN 60947-1) 3
- Fusing min.1 A Slow blow
- Transponder coding Multicode
- Auxiliary voltage DC 24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
- Safety class III
- Connecting cable Profinet I/O cable, at least cat. 5e
- Operating voltage DC 24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
- Locking force FZh 2000 N
- Rated insulation voltage Ui 75 V
- Maximum feed-in current in the connection block max.4000 mA
- Rated impulse withstand voltage Uimp 0,5 kV
- EMC protection requirements In accordance with EN 61000-4 and EN 61326-3-1
- Current consumption max.500 mA
- Guard locking principle Closed-circuit current principle
- Switching frequency 0,25 Hz
- Connection Push-pull RJ45 (X3 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
- Mechanical life 0,1 x 10⁶
- Installation orientation Door hinge DIN left
- Shock and vibration resistance In acc. with EN 60947-5-3
- Housing material Reinforced plastic, die-cast zinc nickel-plated, stainless steel
- Degree of protection IP54
- Weight 3,1 kg
- Ambient temperature -20 ... 55 °C
- Reaction time max.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 117099 on MQ Automation is $3,052.52. Order now.
About the product
Guard locking with guard lock monitoring;Emergency stop according to ISO 13850, illuminated;3 illuminated pushbuttons;Push-pull plug;Pre-assembled on mounting plates;Integrated Profinet RT switch;Multicode
Manufacturer warranty
117099 Euchner
$3,052.52
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$3,052.52
$3,052.52 each
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 117099 with other products
Weight
Series
Product Class
Mission time
Diagnostic Coverage (DC)
Performance Level
Safety Integrity Level
PFHD
B10D
Category
Product version number
Color
Switching element
Assignment diagram
Version
Safety data protocol
Bus data protocol
Assured release distance ...
Degree of contamination (...
Fusing
Transponder coding
Auxiliary voltage DC
Safety class
Connecting cable
Operating voltage DC
Locking force FZh
Rated insulation voltage ...
Maximum feed-in current i...
Rated impulse withstand v...
EMC protection requiremen...
Current consumption
Guard locking principle
Switching frequency
Connection
Mechanical life
Installation orientation
Shock and vibration resis...
Housing material
Degree of protection
Ambient temperature
Reaction time
For the approval acc. to ...
Operating current
Repeat accuracy R
Detent mechanism
Discrepancy time
Off-state current Ir
Operating voltage
Switching current
Type of output
Turn-on time
Switching load
Output voltage
Connection rating
Utilization category acc....
Overtravel
Test-pulse interval
Extraction force
Test pulses
Actuating force
Approach speed
Ready delay
Additional feature
Risk time according to EN...
Solenoid duty cycle
Solenoid operating voltag...
Extension of risk time ac...
Locking force Fmax
Retention force
Selected product
117099
Euchner
117099 Euchner - Evaluation module and bus module MGB-L1...-PN (guard locking by spring force) with ...
Weight7.826401 lb
SeriesSpare parts
Product ClassAccessories
Mission time20
Diagnostic Coverage (DC)99
Performance LevelPL e
Safety Integrity LevelSIL 3 (EN 62061:2005)
PFHD4.07 x 10⁻⁸ (Fixed failure ...
B10D0,13 x 10⁶
Category4
Product version numberV3.30.10
Colorwhite
Switching element1NO
Assignment diagramB1
VersionIlluminated push buttons
Safety data protocolProfisafe (IEC 61784-3-3)
Bus data protocolProfinet (IEC 61158 type 10)
Assured release distance Sarmax.65 mm
Degree of contamination (external, according to EN 60947-1)3
Fusingmin.1 A Slow blow
Transponder codingMulticode
Auxiliary voltage DC24 V DC -15% ... +10% (Th...
Safety classIII
Connecting cableProfinet I/O cable, at least...
Operating voltage DC24 V DC -15% ... 10% ((Re...
Locking force FZh2000 N
Rated insulation voltage Ui75 V
Maximum feed-in current in the connection blockmax.4000 mA
Rated impulse withstand voltage Uimp0,5 kV
EMC protection requirementsIn accordance with EN 61000-...
Current consumptionmax.500 mA
Guard locking principleClosed-circuit current princ...
Switching frequency0,25 Hz
ConnectionPush-pull RJ45 (X3 (The doc...
Mechanical life0,1 x 10⁶
Installation orientationDoor hinge DIN left
Shock and vibration resistanceIn acc. with EN 60947-5-3
Housing materialReinforced plastic, die-cast...
Degree of protectionIP54
Ambient temperature-20 ... 55 °C
Reaction timemax.550 ms Switch-off time...
For the approval acc. to UL the following applies-
Operating current-
Repeat accuracy R-
Detent mechanism-
Discrepancy time-
Off-state current Ir-
Operating voltage-
Switching current-
Type of output-
Turn-on time-
Switching load-
Output voltage-
Connection rating-
Utilization category acc. to EN 60947-5-2-
Overtravel-
Test-pulse interval-
Extraction force-
Test pulses-
Actuating force-
Approach speed-
Ready delay-
Additional feature-
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
Weight3.968316 lb
SeriesMGBS-P-I-AP
Product ClassSafety System
Mission time20 y
Diagnostic Coverage (DC)-
Performance LevelPL e
Safety Integrity Level-
PFHD4.1 x 10 ⁻⁹
B10D0,13 x 10⁶
Category4
Product version number-
Color-
Switching element2 pos. driven NC
Assignment diagram-
VersionEmergency stop
Safety data protocol-
Bus data protocol-
Assured release distance Sar-
Degree of contamination (external, according to EN 60947-1)3
Fusing0,25 ... 8 A
Transponder coding-
Auxiliary voltage DC-
Safety classIII
Connecting cable-
Operating voltage DC24 V DC -15% ... 15% Rev...
Locking force FZh-
Rated insulation voltage Ui50 V
Maximum feed-in current in the connection block-
Rated impulse withstand voltage Uimp0,5 kV
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Current consumption40 mA
Guard locking principle-
Switching frequencymax.0,5 Hz
Connection2 plug connectors M12, 5-pin
Mechanical life1 x 10⁶
Installation orientationDoor hinge DIN right
Shock and vibration resistanceIn acc. with EN 60947-5-3
Housing materialFiber glass reinforced therm...
Degree of protectionIP65 (Screwed tight plug co...
Ambient temperature-20 ... +55 °C
Reaction time-
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current1 ... 100 mA
Repeat accuracy R10 %
Detent mechanismSnap-in bolt
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage5 ... 24 V
Switching current1 ... 150 mA
Type of output2 semiconductor outputs, p-s...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0 ... 1 V DC
Connection rating1 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.100 ms
Extraction force20 N
Test pulsesmax.0,3 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delaymax.1 s
Additional feature-
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
122813
Euchner
122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release
Weight1.763696 lb
SeriesCTP-AR
Product ClassSafety System
Mission time20 y
Diagnostic Coverage (DC)-
Performance LevelPL e
Safety Integrity Level-
PFHD4.1 x 10 ⁻⁹
B10D-
Category4
Product version number-
Color-
Switching element-
Assignment diagram-
Version-
Safety data protocol-
Bus data protocol-
Assured release distance Sar-
Degree of contamination (external, according to EN 60947-1)3
Fusing0,25 ... 8 A
Transponder coding-
Auxiliary voltage DC-
Safety classIII
Connecting cable-
Operating voltage DC24 V DC -15% ... 15% Rev...
Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...
Rated insulation voltage Ui50 V
Maximum feed-in current in the connection block-
Rated impulse withstand voltage Uimp0,5 kV
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Current consumption40 mA
Guard locking principleClosed-circuit current princ...
Switching frequencymax.0,5 Hz
Connection2 plug connectors M12, 5 and...
Mechanical life1 x 10⁶
Installation orientationAny
Shock and vibration resistanceIn acc. with EN 60947-5-3
Housing materialDie-cast zinc
Degree of protectionIP67/IP69/IP69K (Screwed ti...
Ambient temperature-20 ... +55 °C
Reaction time-
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current-
Repeat accuracy R10 %
Detent mechanism-
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage-
Switching current1 ... 50 mA
Type of outputp-switching, short circuit-p...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0,8xUB ... UB V DC
Connection rating6 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.140 ms
Extraction force20 N
Test pulsesmax.1,0 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delay8 s
Additional featureEscape release actuated by p...
Risk time according to EN 60947-5-3max.260 ms
Solenoid duty cycle100 %
Solenoid operating voltage DC24 V DC -15% ... +10% Re...
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Locking force Fmax3900 N
Retention force20 N
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 117099?
The price of 117099 on MQ Automation is $3,052.52. Order now.
Out if stock but available for backorder.
117099 Euchner - Evaluation module and bus module MGB-L1...-PN (guard locking by spring force) with 4 control elements, push-pull plug
Similar products from: Safety Accessories
What can I help you find today?
