136595 Euchner Safety Switches

136595 on MQ Automation
Euchner
  • 136595
  • 136595
  • 136595

Part#:136595

Alt. Part#:CTP-I1-AP-U-HA-AEC-SA-136595

Manufacturer:Euchner

Category:Safety Switches

Product Lifecycle:Active

Product description

136595 Euchner - Transponder-coded safety switch CTP-AP, M12

Product Details

  • Weight
    1.72621746 lb
  • Series
    CTP-AP
  • Product Class
    Safety System
  • Mission time
    20 y
  • PFHD
    4.1 x 10 ⁻⁹
  • Category
    4
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures see operating instructions
  • Additional feature
    Escape release actuated by pushing
  • Repeat accuracy R
    10 %
  • Performance Level
    PL e
  • Off-state current Ir
    max.0,25 mA
  • Turn-on time
    max.400 ms
  • Discrepancy time
    max.10 ms In acc. with EN IEC 60947-5-3
  • Switching current
    1 ... 150 mA
  • Output voltage
    UB-1,5 ... UB V DC
  • Safety class
    III
  • Type of output
    2 semiconductor outputs, p-switching, short circuit-proof
  • Switching load
    24V DC, class 2 (Alternatively see operating instructions)
  • Solenoid duty cycle
    100 %
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Connection rating
    6 W
  • Rated impulse withstand voltage Uimp
    0,5 kV
  • Rated insulation voltage Ui
    50 V
  • Fusing
    0,5 ... 8 A
  • Utilization category acc. to EN 60947-5-2
    24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
  • Test-pulse interval
    min.100 ms
  • Solenoid operating voltage DC
    24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Current consumption
    40 mA
  • Operating voltage DC
    24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Test pulses
    max.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
  • Overtravel
    5 mm
  • Guard locking principle
    Closed-circuit current principle
  • Extraction force
    20 N
  • Actuating force
    10 N
  • Locking force Fmax
    3900 N
  • Retention force
    20 N
  • Locking force FZh
    3000 N (Fzh = Fmax/1.3 Depending on the actuator used)
  • Approach speed
    max.20 m/min
  • Connection
    1 plug connector M12, 8-pin
  • Switching frequency
    max.0,5 Hz
  • Degree of protection
    IP67/IP69/IP69K (Screwed tight plug connector/mating component)
  • Housing material
    Die-cast zinc
  • Ready delay
    max.1 s
  • Shock and vibration resistance
    In acc. with EN 60947-5-3
  • Installation orientation
    Any
  • Mechanical life
    1 x 10⁶
  • Ambient temperature
    -20 ... +55 °C
  • Weight
    0,42 kg

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 136595 on MQ Automation is $902.04. Order now.


About the product

Safety switch with guard locking and integrated evaluation electronics;Guard locking suitable for process protection only;Short circuit monitoring;2 safety outputs (semiconductor outputs);Up to category 4 / PL e according to EN ISO 13849-1;With plug connector M12;Unicode;With escape release;Door monitoring output;Approach directions A, B and C (delivery state)


Manufacturer warranty

136595 Euchner

$902.04

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$902.04

$902.04 each

Average response time: 11 minutes

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 136595 with other products

Weight

Series

Product Class

Mission time

PFHD

Category

For the approval acc. to ...

Additional feature

Repeat accuracy R

Performance Level

Off-state current Ir

Turn-on time

Discrepancy time

Switching current

Output voltage

Safety class

Type of output

Switching load

Solenoid duty cycle

EMC protection requiremen...

Degree of contamination (...

Connection rating

Rated impulse withstand v...

Rated insulation voltage ...

Fusing

Utilization category acc....

Test-pulse interval

Solenoid operating voltag...

Current consumption

Operating voltage DC

Test pulses

Overtravel

Guard locking principle

Extraction force

Actuating force

Locking force Fmax

Retention force

Locking force FZh

Approach speed

Connection

Switching frequency

Degree of protection

Housing material

Ready delay

Shock and vibration resis...

Installation orientation

Mechanical life

Ambient temperature

Risk time according to EN...

Extension of risk time ac...

B10D

Version

Operating current

Switching element

Detent mechanism

Operating voltage

Selected product

136595
0 in stock
136595
Euchner

136595 Euchner - Transponder-coded safety switch CTP-AP, M12

Weight1.72621746 lb

SeriesCTP-AP

Product ClassSafety System

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Additional featureEscape release actuated by p...

Repeat accuracy R10 %

Performance LevelPL e

Off-state current Irmax.0,25 mA

Turn-on timemax.400 ms

Discrepancy timemax.10 ms In acc. with EN ...

Switching current1 ... 150 mA

Output voltageUB-1,5 ... UB V DC

Safety classIII

Type of output2 semiconductor outputs, p-s...

Switching load24V DC, class 2 (Alternativ...

Solenoid duty cycle100 %

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Degree of contamination (external, according to EN 60947-1)3

Connection rating6 W

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Fusing0,5 ... 8 A

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Test-pulse intervalmin.100 ms

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Test pulsesmax.0,3 ms (Applies for a l...

Overtravel5 mm

Guard locking principleClosed-circuit current princ...

Extraction force20 N

Actuating force10 N

Locking force Fmax3900 N

Retention force20 N

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Approach speedmax.20 m/min

Connection1 plug connector M12, 8-pin

Switching frequencymax.0,5 Hz

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Housing materialDie-cast zinc

Ready delaymax.1 s

Shock and vibration resistanceIn acc. with EN 60947-5-3

Installation orientationAny

Mechanical life1 x 10⁶

Ambient temperature-20 ... +55 °C

Risk time according to EN 60947-5-3-

Extension of risk time according to EN 60947-5-3 per device-

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Additional featureEscape release actuated by p...

Repeat accuracy R10 %

Performance LevelPL e

Off-state current Irmax.0,25 mA

Turn-on timemax.400 ms

Discrepancy timemax.10 ms In acc. with EN ...

Switching current1 ... 50 mA

Output voltage0,8xUB ... UB V DC

Safety classIII

Type of outputp-switching, short circuit-p...

Switching load24V DC, class 2 (Alternativ...

Solenoid duty cycle100 %

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Degree of contamination (external, according to EN 60947-1)3

Connection rating6 W

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Fusing0,25 ... 8 A

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Test-pulse intervalmin.140 ms

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Test pulsesmax.1,0 ms (Applies for a l...

Overtravel5 mm

Guard locking principleClosed-circuit current princ...

Extraction force20 N

Actuating force10 N

Locking force Fmax3900 N

Retention force20 N

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Approach speedmax.20 m/min

Connection2 plug connectors M12, 5 and...

Switching frequencymax.0,5 Hz

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Housing materialDie-cast zinc

Ready delay8 s

Shock and vibration resistanceIn acc. with EN 60947-5-3

Installation orientationAny

Mechanical life1 x 10⁶

Ambient temperature-20 ... +55 °C

Risk time according to EN 60947-5-3max.260 ms

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Additional feature-

Repeat accuracy R10 %

Performance LevelPL e

Off-state current Irmax.0,25 mA

Turn-on timemax.400 ms

Discrepancy timemax.10 ms In acc. with EN ...

Switching current1 ... 150 mA

Output voltage0 ... 1 V DC

Safety classIII

Type of output2 semiconductor outputs, p-s...

Switching load24V DC, class 2 (Alternativ...

Solenoid duty cycle-

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Degree of contamination (external, according to EN 60947-1)3

Connection rating1 W

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Fusing0,25 ... 8 A

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Test-pulse intervalmin.100 ms

Solenoid operating voltage DC-

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Test pulsesmax.0,3 ms (Applies for a l...

Overtravel5 mm

Guard locking principle-

Extraction force20 N

Actuating force10 N

Locking force Fmax-

Retention force-

Locking force FZh-

Approach speedmax.20 m/min

Connection2 plug connectors M12, 5-pin

Switching frequencymax.0,5 Hz

Degree of protectionIP65 (Screwed tight plug co...

Housing materialFiber glass reinforced therm...

Ready delaymax.1 s

Shock and vibration resistanceIn acc. with EN 60947-5-3

Installation orientationDoor hinge DIN right

Mechanical life1 x 10⁶

Ambient temperature-20 ... +55 °C

Risk time according to EN 60947-5-3-

Extension of risk time according to EN 60947-5-3 per device-

B10D0,13 x 10⁶

VersionEmergency stop

Operating current1 ... 100 mA

Switching element2 pos. driven NC

Detent mechanismSnap-in bolt

Operating voltage5 ... 24 V

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

Relevant products

FAQ

What is the price of 136595?
The price of 136595 on MQ Automation is $902.04. Order now.

Out if stock but available for backorder.

136595 Euchner - Transponder-coded safety switch CTP-AP, M12

Similar products from: Safety Switches

What can I help you find today?

Recommended parts