136553 Euchner Safety Accessories
Part#:136553
Alt. Part#:MGB-L0B-EIA-R-136553
Manufacturer:Euchner
Category:Safety Accessories
Product Lifecycle:Active
Product description
136553 Euchner - Interlocking module MGB-L0...-EI with 2 pushbuttons, emergency stop
Product Details
- Series MGB-EI
- Product Class Accessories
- B10D 0,13 x 10⁶
- Mission time 20
- Diagnostic Coverage (DC) 99
- PFHD 3.37 x 10⁻⁹ (Fixed failure rate without consideration of faults in wearing parts.)
- Safety Integrity Level SIL 3 (EN 62061:2005)
- Performance Level PL e
- Category 4
- Switching element 2 pos. driven NC
- Additional feature Incl. cover set ID. No. 120344
- Product version number V1.2
- Version Emergency stop illuminated
- Special features With adhesive ring
- Safety data protocol CIP Safety
- Assignment diagram B0
- Assured release distance Sar max.65 mm
- Bus data protocol Ethernet/IP
- Fusing min.1 A Slow blow
- Operating voltage DC 24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
- Auxiliary voltage DC 24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
- Transponder coding Unicode
- Safety class III
- Degree of contamination (external, according to EN 60947-1) 3
- EMC protection requirements In accordance with EN 61000-4 and EN 61326-3-1
- Connecting cable Ethernet/IP cable, Cat. 5e min.
- Maximum feed-in current in the connection block max.4000 mA
- Rated impulse withstand voltage Uimp 0,5 kV
- Rated insulation voltage Ui 75 V
- Current consumption max.500 mA
- Switching frequency 0,25 Hz
- Connection M12 Power, A-coded (X1)
- Ambient temperature -20 ... 55 °C
- Shock and vibration resistance In acc. with EN 60947-5-3
- Reaction time max.250 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
- Degree of protection IP54
- Housing material Reinforced plastic, die-cast zinc nickel-plated, stainless steel
- Mechanical life 0,1 x 10⁶
- Weight 3,1 kg
- Installation orientation Door hinge DIN right
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
About the product
Interlocking (without guard locking);Emergency stop according to ISO 13850, illuminated;2 illuminated pushbuttons;including adhesive labels;Connection via M12 plug;Pre-assembled on mounting plates;Unicode
Manufacturer warranty
136553 Euchner
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 136553 with other products
Series
Product Class
B10D
Mission time
Diagnostic Coverage (DC)
PFHD
Safety Integrity Level
Performance Level
Category
Switching element
Additional feature
Product version number
Version
Special features
Safety data protocol
Assignment diagram
Assured release distance ...
Bus data protocol
Fusing
Operating voltage DC
Auxiliary voltage DC
Transponder coding
Safety class
Degree of contamination (...
EMC protection requiremen...
Connecting cable
Maximum feed-in current i...
Rated impulse withstand v...
Rated insulation voltage ...
Current consumption
Switching frequency
Connection
Ambient temperature
Shock and vibration resis...
Reaction time
Degree of protection
Housing material
Mechanical life
Weight
Installation orientation
For the approval acc. to ...
Operating current
Repeat accuracy R
Detent mechanism
Discrepancy time
Off-state current Ir
Operating voltage
Switching current
Type of output
Turn-on time
Switching load
Output voltage
Connection rating
Utilization category acc....
Overtravel
Test-pulse interval
Extraction force
Test pulses
Actuating force
Approach speed
Ready delay
Risk time according to EN...
Solenoid duty cycle
Solenoid operating voltag...
Extension of risk time ac...
Locking force Fmax
Retention force
Locking force FZh
Guard locking principle
Selected product
136553
Euchner
136553 Euchner - Interlocking module MGB-L0...-EI with 2 pushbuttons, emergency stop
SeriesMGB-EI
Product ClassAccessories
B10D0,13 x 10⁶
Mission time20
Diagnostic Coverage (DC)99
PFHD3.37 x 10⁻⁹ (Fixed failure ...
Safety Integrity LevelSIL 3 (EN 62061:2005)
Performance LevelPL e
Category4
Switching element2 pos. driven NC
Additional featureIncl. cover set ID. No. 1203...
Product version numberV1.2
VersionEmergency stop illuminated
Special featuresWith adhesive ring
Safety data protocolCIP Safety
Assignment diagramB0
Assured release distance Sarmax.65 mm
Bus data protocolEthernet/IP
Fusingmin.1 A Slow blow
Operating voltage DC24 V DC -15% ... 10% ((Re...
Auxiliary voltage DC24 V DC -15% ... +10% (Th...
Transponder codingUnicode
Safety classIII
Degree of contamination (external, according to EN 60947-1)3
EMC protection requirementsIn accordance with EN 61000-...
Connecting cableEthernet/IP cable, Cat. 5e m...
Maximum feed-in current in the connection blockmax.4000 mA
Rated impulse withstand voltage Uimp0,5 kV
Rated insulation voltage Ui75 V
Current consumptionmax.500 mA
Switching frequency0,25 Hz
ConnectionM12 Power, A-coded (X1)
Ambient temperature-20 ... 55 °C
Shock and vibration resistanceIn acc. with EN 60947-5-3
Reaction timemax.250 ms Switch-off time...
Degree of protectionIP54
Housing materialReinforced plastic, die-cast...
Mechanical life0,1 x 10⁶
Weight3,1 kg
Installation orientationDoor hinge DIN right
For the approval acc. to UL the following applies-
Operating current-
Repeat accuracy R-
Detent mechanism-
Discrepancy time-
Off-state current Ir-
Operating voltage-
Switching current-
Type of output-
Turn-on time-
Switching load-
Output voltage-
Connection rating-
Utilization category acc. to EN 60947-5-2-
Overtravel-
Test-pulse interval-
Extraction force-
Test pulses-
Actuating force-
Approach speed-
Ready delay-
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
Locking force FZh-
Guard locking principle-
SeriesMGBS-P-I-AP
Product ClassSafety System
B10D0,13 x 10⁶
Mission time20 y
Diagnostic Coverage (DC)-
PFHD4.1 x 10 ⁻⁹
Safety Integrity Level-
Performance LevelPL e
Category4
Switching element2 pos. driven NC
Additional feature-
Product version number-
VersionEmergency stop
Special features-
Safety data protocol-
Assignment diagram-
Assured release distance Sar-
Bus data protocol-
Fusing0,25 ... 8 A
Operating voltage DC24 V DC -15% ... 15% Rev...
Auxiliary voltage DC-
Transponder coding-
Safety classIII
Degree of contamination (external, according to EN 60947-1)3
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Connecting cable-
Maximum feed-in current in the connection block-
Rated impulse withstand voltage Uimp0,5 kV
Rated insulation voltage Ui50 V
Current consumption40 mA
Switching frequencymax.0,5 Hz
Connection2 plug connectors M12, 5-pin
Ambient temperature-20 ... +55 °C
Shock and vibration resistanceIn acc. with EN 60947-5-3
Reaction time-
Degree of protectionIP65 (Screwed tight plug co...
Housing materialFiber glass reinforced therm...
Mechanical life1 x 10⁶
Weight3.968316 lb
Installation orientationDoor hinge DIN right
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current1 ... 100 mA
Repeat accuracy R10 %
Detent mechanismSnap-in bolt
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage5 ... 24 V
Switching current1 ... 150 mA
Type of output2 semiconductor outputs, p-s...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0 ... 1 V DC
Connection rating1 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.100 ms
Extraction force20 N
Test pulsesmax.0,3 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delaymax.1 s
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
Locking force FZh-
Guard locking principle-
122813
Euchner
122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release
SeriesCTP-AR
Product ClassSafety System
B10D-
Mission time20 y
Diagnostic Coverage (DC)-
PFHD4.1 x 10 ⁻⁹
Safety Integrity Level-
Performance LevelPL e
Category4
Switching element-
Additional featureEscape release actuated by p...
Product version number-
Version-
Special features-
Safety data protocol-
Assignment diagram-
Assured release distance Sar-
Bus data protocol-
Fusing0,25 ... 8 A
Operating voltage DC24 V DC -15% ... 15% Rev...
Auxiliary voltage DC-
Transponder coding-
Safety classIII
Degree of contamination (external, according to EN 60947-1)3
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Connecting cable-
Maximum feed-in current in the connection block-
Rated impulse withstand voltage Uimp0,5 kV
Rated insulation voltage Ui50 V
Current consumption40 mA
Switching frequencymax.0,5 Hz
Connection2 plug connectors M12, 5 and...
Ambient temperature-20 ... +55 °C
Shock and vibration resistanceIn acc. with EN 60947-5-3
Reaction time-
Degree of protectionIP67/IP69/IP69K (Screwed ti...
Housing materialDie-cast zinc
Mechanical life1 x 10⁶
Weight1.763696 lb
Installation orientationAny
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current-
Repeat accuracy R10 %
Detent mechanism-
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage-
Switching current1 ... 50 mA
Type of outputp-switching, short circuit-p...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0,8xUB ... UB V DC
Connection rating6 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.140 ms
Extraction force20 N
Test pulsesmax.1,0 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delay8 s
Risk time according to EN 60947-5-3max.260 ms
Solenoid duty cycle100 %
Solenoid operating voltage DC24 V DC -15% ... +10% Re...
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Locking force Fmax3900 N
Retention force20 N
Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...
Guard locking principleClosed-circuit current princ...
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
Out if stock but available for backorder.
136553 Euchner - Interlocking module MGB-L0...-EI with 2 pushbuttons, emergency stop
Similar products from: Safety Accessories
What can I help you find today?
