136522 Euchner Safety Accessories
Part#:136522
Alt. Part#:MGB-L2B-EIA-L-136522
Manufacturer:Euchner
Category:Safety Accessories
Product Lifecycle:Active
Product description
136522 Euchner - Locking module MGB-L2...-EI (guard locking by solenoid force) with 3 pushbuttons, emergency stop, RC12
Product Details
- Weight 8.267325 lb
- Series MGB-EI
- Product Class Accessories
- Mission time 20 y
- Safety Integrity Level SIL 3 (EN 62061:2005)
- PFHD 3.05 x 10⁻⁹ (Fixed failure rate without consideration of faults in wearing parts.)
- Diagnostic Coverage (DC) 99
- B10D 0,13 x 10⁶
- Category 4
- Performance Level PL e
- Product version number V1.2
- Switching element 2 pos. driven NC
- Additional feature Incl. cover set ID. No. 120344
- Assignment diagram B1
- Special features With adhesive ring
- Version Emergency stop illuminated
- Assured release distance Sar max.65 mm
- Safety data protocol CIP Safety
- Bus data protocol Ethernet/IP
- Fusing min.1 A Slow blow
- Auxiliary voltage DC 24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
- Operating voltage DC 24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
- Transponder coding Unicode
- Connecting cable Ethernet/IP cable, Cat. 5e min.
- Safety class III
- Degree of contamination (external, according to EN 60947-1) 3
- Maximum feed-in current in the connection block max.4000 mA
- EMC protection requirements In accordance with EN 61000-4 and EN 61326-3-1
- Rated insulation voltage Ui 75 V
- Rated impulse withstand voltage Uimp 0,5 kV
- Current consumption max.500 mA
- Locking force FZh 2000 N
- Guard locking principle Open-circuit current principle
- Connection M12 Power, A-coded (X1)
- Switching frequency 0,25 Hz
- Ambient temperature -20 ... 55 °C
- Reaction time max.250 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
- Installation orientation Door hinge DIN left
- Degree of protection IP54
- Housing material Reinforced plastic, die-cast zinc nickel-plated, stainless steel
- Mechanical life 0,1 x 10⁶
- Weight 3,1 kg
- Shock and vibration resistance In acc. with EN 60947-5-3
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 136522 on MQ Automation is $3,200.30. Order now.
About the product
Guard locking with guard lock monitoring;Emergency stop according to ISO 13850, illuminated;3 illuminated pushbuttons;Connection via M12 plug;including terminal plug for enabling switch;Pre-assembled on mounting plates;Unicode
Manufacturer warranty
136522 Euchner
$3,200.30
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$3,200.30
$3,200.30 each
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 136522 with other products
Weight
Series
Product Class
Mission time
Safety Integrity Level
PFHD
Diagnostic Coverage (DC)
B10D
Category
Performance Level
Product version number
Switching element
Additional feature
Assignment diagram
Special features
Version
Assured release distance ...
Safety data protocol
Bus data protocol
Fusing
Auxiliary voltage DC
Operating voltage DC
Transponder coding
Connecting cable
Safety class
Degree of contamination (...
Maximum feed-in current i...
EMC protection requiremen...
Rated insulation voltage ...
Rated impulse withstand v...
Current consumption
Locking force FZh
Guard locking principle
Connection
Switching frequency
Ambient temperature
Reaction time
Installation orientation
Degree of protection
Housing material
Mechanical life
Shock and vibration resis...
For the approval acc. to ...
Operating current
Repeat accuracy R
Detent mechanism
Discrepancy time
Off-state current Ir
Operating voltage
Switching current
Type of output
Turn-on time
Switching load
Output voltage
Connection rating
Utilization category acc....
Overtravel
Test-pulse interval
Extraction force
Test pulses
Actuating force
Approach speed
Ready delay
Risk time according to EN...
Solenoid duty cycle
Solenoid operating voltag...
Extension of risk time ac...
Locking force Fmax
Retention force
Selected product
136522
Euchner
136522 Euchner - Locking module MGB-L2...-EI (guard locking by solenoid force) with 3 pushbuttons, e...
Weight8.267325 lb
SeriesMGB-EI
Product ClassAccessories
Mission time20 y
Safety Integrity LevelSIL 3 (EN 62061:2005)
PFHD3.05 x 10⁻⁹ (Fixed failure ...
Diagnostic Coverage (DC)99
B10D0,13 x 10⁶
Category4
Performance LevelPL e
Product version numberV1.2
Switching element2 pos. driven NC
Additional featureIncl. cover set ID. No. 1203...
Assignment diagramB1
Special featuresWith adhesive ring
VersionEmergency stop illuminated
Assured release distance Sarmax.65 mm
Safety data protocolCIP Safety
Bus data protocolEthernet/IP
Fusingmin.1 A Slow blow
Auxiliary voltage DC24 V DC -15% ... +10% (Th...
Operating voltage DC24 V DC -15% ... 10% ((Re...
Transponder codingUnicode
Connecting cableEthernet/IP cable, Cat. 5e m...
Safety classIII
Degree of contamination (external, according to EN 60947-1)3
Maximum feed-in current in the connection blockmax.4000 mA
EMC protection requirementsIn accordance with EN 61000-...
Rated insulation voltage Ui75 V
Rated impulse withstand voltage Uimp0,5 kV
Current consumptionmax.500 mA
Locking force FZh2000 N
Guard locking principleOpen-circuit current princip...
ConnectionM12 Power, A-coded (X1)
Switching frequency0,25 Hz
Ambient temperature-20 ... 55 °C
Reaction timemax.250 ms Switch-off time...
Installation orientationDoor hinge DIN left
Degree of protectionIP54
Housing materialReinforced plastic, die-cast...
Mechanical life0,1 x 10⁶
Shock and vibration resistanceIn acc. with EN 60947-5-3
For the approval acc. to UL the following applies-
Operating current-
Repeat accuracy R-
Detent mechanism-
Discrepancy time-
Off-state current Ir-
Operating voltage-
Switching current-
Type of output-
Turn-on time-
Switching load-
Output voltage-
Connection rating-
Utilization category acc. to EN 60947-5-2-
Overtravel-
Test-pulse interval-
Extraction force-
Test pulses-
Actuating force-
Approach speed-
Ready delay-
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
Weight3.968316 lb
SeriesMGBS-P-I-AP
Product ClassSafety System
Mission time20 y
Safety Integrity Level-
PFHD4.1 x 10 ⁻⁹
Diagnostic Coverage (DC)-
B10D0,13 x 10⁶
Category4
Performance LevelPL e
Product version number-
Switching element2 pos. driven NC
Additional feature-
Assignment diagram-
Special features-
VersionEmergency stop
Assured release distance Sar-
Safety data protocol-
Bus data protocol-
Fusing0,25 ... 8 A
Auxiliary voltage DC-
Operating voltage DC24 V DC -15% ... 15% Rev...
Transponder coding-
Connecting cable-
Safety classIII
Degree of contamination (external, according to EN 60947-1)3
Maximum feed-in current in the connection block-
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Rated insulation voltage Ui50 V
Rated impulse withstand voltage Uimp0,5 kV
Current consumption40 mA
Locking force FZh-
Guard locking principle-
Connection2 plug connectors M12, 5-pin
Switching frequencymax.0,5 Hz
Ambient temperature-20 ... +55 °C
Reaction time-
Installation orientationDoor hinge DIN right
Degree of protectionIP65 (Screwed tight plug co...
Housing materialFiber glass reinforced therm...
Mechanical life1 x 10⁶
Shock and vibration resistanceIn acc. with EN 60947-5-3
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current1 ... 100 mA
Repeat accuracy R10 %
Detent mechanismSnap-in bolt
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage5 ... 24 V
Switching current1 ... 150 mA
Type of output2 semiconductor outputs, p-s...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0 ... 1 V DC
Connection rating1 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.100 ms
Extraction force20 N
Test pulsesmax.0,3 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delaymax.1 s
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
122813
Euchner
122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release
Weight1.763696 lb
SeriesCTP-AR
Product ClassSafety System
Mission time20 y
Safety Integrity Level-
PFHD4.1 x 10 ⁻⁹
Diagnostic Coverage (DC)-
B10D-
Category4
Performance LevelPL e
Product version number-
Switching element-
Additional featureEscape release actuated by p...
Assignment diagram-
Special features-
Version-
Assured release distance Sar-
Safety data protocol-
Bus data protocol-
Fusing0,25 ... 8 A
Auxiliary voltage DC-
Operating voltage DC24 V DC -15% ... 15% Rev...
Transponder coding-
Connecting cable-
Safety classIII
Degree of contamination (external, according to EN 60947-1)3
Maximum feed-in current in the connection block-
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Rated insulation voltage Ui50 V
Rated impulse withstand voltage Uimp0,5 kV
Current consumption40 mA
Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...
Guard locking principleClosed-circuit current princ...
Connection2 plug connectors M12, 5 and...
Switching frequencymax.0,5 Hz
Ambient temperature-20 ... +55 °C
Reaction time-
Installation orientationAny
Degree of protectionIP67/IP69/IP69K (Screwed ti...
Housing materialDie-cast zinc
Mechanical life1 x 10⁶
Shock and vibration resistanceIn acc. with EN 60947-5-3
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current-
Repeat accuracy R10 %
Detent mechanism-
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage-
Switching current1 ... 50 mA
Type of outputp-switching, short circuit-p...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0,8xUB ... UB V DC
Connection rating6 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.140 ms
Extraction force20 N
Test pulsesmax.1,0 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delay8 s
Risk time according to EN 60947-5-3max.260 ms
Solenoid duty cycle100 %
Solenoid operating voltage DC24 V DC -15% ... +10% Re...
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Locking force Fmax3900 N
Retention force20 N
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 136522?
The price of 136522 on MQ Automation is $3,200.30. Order now.
Out if stock but available for backorder.
136522 Euchner - Locking module MGB-L2...-EI (guard locking by solenoid force) with 3 pushbuttons, emergency stop, RC12
Similar products from: Safety Accessories
What can I help you find today?
