136508 Euchner Safety Accessories
Part#:136508
Alt. Part#:MGB-L2B-EIA-R-136508
Manufacturer:Euchner
Category:Safety Accessories
Product Lifecycle:Active
Product description
136508 Euchner - Locking module MGB-L2...-EI (guard locking by solenoid force) with 3 pushbuttons, emergency stop, RC12
Product Details
- Weight 8.1130016 lb
- Series MGB-EI
- Product Class Accessories
- Mission time 20 y
- Diagnostic Coverage (DC) 99
- PFHD 3.05 x 10⁻⁹ (Fixed failure rate without consideration of faults in wearing parts.)
- Safety Integrity Level SIL 3 (EN 62061:2005)
- Product version number V1.2
- Category 4
- Additional feature Incl. cover set ID. No. 120344
- B10D 0,13 x 10⁶
- Performance Level PL e
- Switching element 2 pos. driven NC
- Assignment diagram B1
- Bus data protocol Ethernet/IP
- Special features With adhesive ring
- Version Emergency stop illuminated
- Safety data protocol CIP Safety
- Auxiliary voltage DC 24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
- Transponder coding Unicode
- Assured release distance Sar max.65 mm
- Safety class III
- Operating voltage DC 24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
- Connecting cable Ethernet/IP cable, Cat. 5e min.
- Fusing min.1 A Slow blow
- Degree of contamination (external, according to EN 60947-1) 3
- Rated impulse withstand voltage Uimp 0,5 kV
- EMC protection requirements In accordance with EN 61000-4 and EN 61326-3-1
- Current consumption max.500 mA
- Locking force FZh 2000 N
- Connection Plug connector RC12 (X14)
- Rated insulation voltage Ui 75 V
- Maximum feed-in current in the connection block max.4000 mA
- Guard locking principle Open-circuit current principle
- Housing material Reinforced plastic, die-cast zinc nickel-plated, stainless steel
- Switching frequency 0,25 Hz
- Weight 3,1 kg
- Ambient temperature -20 ... 55 °C
- Reaction time max.100 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
- Installation orientation Door hinge DIN right
- Shock and vibration resistance In acc. with EN 60947-5-3
- Mechanical life 0,1 x 10⁶
- Degree of protection IP54
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 136508 on MQ Automation is $3,200.30. Order now.
About the product
Guard locking with guard lock monitoring;Emergency stop according to ISO 13850, illuminated;3 illuminated pushbuttons;Connection via M12 plug;including terminal plug for enabling switch;Pre-assembled on mounting plates;Unicode
Manufacturer warranty
136508 Euchner
$3,200.30
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$3,200.30
$3,200.30 each
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 136508 with other products
Weight
Series
Product Class
Mission time
Diagnostic Coverage (DC)
PFHD
Safety Integrity Level
Product version number
Category
Additional feature
B10D
Performance Level
Switching element
Assignment diagram
Bus data protocol
Special features
Version
Safety data protocol
Auxiliary voltage DC
Transponder coding
Assured release distance ...
Safety class
Operating voltage DC
Connecting cable
Fusing
Degree of contamination (...
Rated impulse withstand v...
EMC protection requiremen...
Current consumption
Locking force FZh
Connection
Rated insulation voltage ...
Maximum feed-in current i...
Guard locking principle
Housing material
Switching frequency
Ambient temperature
Reaction time
Installation orientation
Shock and vibration resis...
Mechanical life
Degree of protection
For the approval acc. to ...
Operating current
Repeat accuracy R
Detent mechanism
Discrepancy time
Off-state current Ir
Operating voltage
Switching current
Type of output
Turn-on time
Switching load
Output voltage
Connection rating
Utilization category acc....
Overtravel
Test-pulse interval
Extraction force
Test pulses
Actuating force
Approach speed
Ready delay
Risk time according to EN...
Solenoid duty cycle
Solenoid operating voltag...
Extension of risk time ac...
Locking force Fmax
Retention force
Selected product
136508
Euchner
136508 Euchner - Locking module MGB-L2...-EI (guard locking by solenoid force) with 3 pushbuttons, e...
Weight8.1130016 lb
SeriesMGB-EI
Product ClassAccessories
Mission time20 y
Diagnostic Coverage (DC)99
PFHD3.05 x 10⁻⁹ (Fixed failure ...
Safety Integrity LevelSIL 3 (EN 62061:2005)
Product version numberV1.2
Category4
Additional featureIncl. cover set ID. No. 1203...
B10D0,13 x 10⁶
Performance LevelPL e
Switching element2 pos. driven NC
Assignment diagramB1
Bus data protocolEthernet/IP
Special featuresWith adhesive ring
VersionEmergency stop illuminated
Safety data protocolCIP Safety
Auxiliary voltage DC24 V DC -15% ... +10% (Th...
Transponder codingUnicode
Assured release distance Sarmax.65 mm
Safety classIII
Operating voltage DC24 V DC -15% ... 10% ((Re...
Connecting cableEthernet/IP cable, Cat. 5e m...
Fusingmin.1 A Slow blow
Degree of contamination (external, according to EN 60947-1)3
Rated impulse withstand voltage Uimp0,5 kV
EMC protection requirementsIn accordance with EN 61000-...
Current consumptionmax.500 mA
Locking force FZh2000 N
ConnectionPlug connector RC12 (X14)
Rated insulation voltage Ui75 V
Maximum feed-in current in the connection blockmax.4000 mA
Guard locking principleOpen-circuit current princip...
Housing materialReinforced plastic, die-cast...
Switching frequency0,25 Hz
Ambient temperature-20 ... 55 °C
Reaction timemax.100 ms Switch-off time...
Installation orientationDoor hinge DIN right
Shock and vibration resistanceIn acc. with EN 60947-5-3
Mechanical life0,1 x 10⁶
Degree of protectionIP54
For the approval acc. to UL the following applies-
Operating current-
Repeat accuracy R-
Detent mechanism-
Discrepancy time-
Off-state current Ir-
Operating voltage-
Switching current-
Type of output-
Turn-on time-
Switching load-
Output voltage-
Connection rating-
Utilization category acc. to EN 60947-5-2-
Overtravel-
Test-pulse interval-
Extraction force-
Test pulses-
Actuating force-
Approach speed-
Ready delay-
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
Weight3.968316 lb
SeriesMGBS-P-I-AP
Product ClassSafety System
Mission time20 y
Diagnostic Coverage (DC)-
PFHD4.1 x 10 ⁻⁹
Safety Integrity Level-
Product version number-
Category4
Additional feature-
B10D0,13 x 10⁶
Performance LevelPL e
Switching element2 pos. driven NC
Assignment diagram-
Bus data protocol-
Special features-
VersionEmergency stop
Safety data protocol-
Auxiliary voltage DC-
Transponder coding-
Assured release distance Sar-
Safety classIII
Operating voltage DC24 V DC -15% ... 15% Rev...
Connecting cable-
Fusing0,25 ... 8 A
Degree of contamination (external, according to EN 60947-1)3
Rated impulse withstand voltage Uimp0,5 kV
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Current consumption40 mA
Locking force FZh-
Connection2 plug connectors M12, 5-pin
Rated insulation voltage Ui50 V
Maximum feed-in current in the connection block-
Guard locking principle-
Housing materialFiber glass reinforced therm...
Switching frequencymax.0,5 Hz
Ambient temperature-20 ... +55 °C
Reaction time-
Installation orientationDoor hinge DIN right
Shock and vibration resistanceIn acc. with EN 60947-5-3
Mechanical life1 x 10⁶
Degree of protectionIP65 (Screwed tight plug co...
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current1 ... 100 mA
Repeat accuracy R10 %
Detent mechanismSnap-in bolt
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage5 ... 24 V
Switching current1 ... 150 mA
Type of output2 semiconductor outputs, p-s...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0 ... 1 V DC
Connection rating1 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.100 ms
Extraction force20 N
Test pulsesmax.0,3 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delaymax.1 s
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
122813
Euchner
122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release
Weight1.763696 lb
SeriesCTP-AR
Product ClassSafety System
Mission time20 y
Diagnostic Coverage (DC)-
PFHD4.1 x 10 ⁻⁹
Safety Integrity Level-
Product version number-
Category4
Additional featureEscape release actuated by p...
B10D-
Performance LevelPL e
Switching element-
Assignment diagram-
Bus data protocol-
Special features-
Version-
Safety data protocol-
Auxiliary voltage DC-
Transponder coding-
Assured release distance Sar-
Safety classIII
Operating voltage DC24 V DC -15% ... 15% Rev...
Connecting cable-
Fusing0,25 ... 8 A
Degree of contamination (external, according to EN 60947-1)3
Rated impulse withstand voltage Uimp0,5 kV
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Current consumption40 mA
Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...
Connection2 plug connectors M12, 5 and...
Rated insulation voltage Ui50 V
Maximum feed-in current in the connection block-
Guard locking principleClosed-circuit current princ...
Housing materialDie-cast zinc
Switching frequencymax.0,5 Hz
Ambient temperature-20 ... +55 °C
Reaction time-
Installation orientationAny
Shock and vibration resistanceIn acc. with EN 60947-5-3
Mechanical life1 x 10⁶
Degree of protectionIP67/IP69/IP69K (Screwed ti...
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current-
Repeat accuracy R10 %
Detent mechanism-
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage-
Switching current1 ... 50 mA
Type of outputp-switching, short circuit-p...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0,8xUB ... UB V DC
Connection rating6 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.140 ms
Extraction force20 N
Test pulsesmax.1,0 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delay8 s
Risk time according to EN 60947-5-3max.260 ms
Solenoid duty cycle100 %
Solenoid operating voltage DC24 V DC -15% ... +10% Re...
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Locking force Fmax3900 N
Retention force20 N
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 136508?
The price of 136508 on MQ Automation is $3,200.30. Order now.
Out if stock but available for backorder.
136508 Euchner - Locking module MGB-L2...-EI (guard locking by solenoid force) with 3 pushbuttons, emergency stop, RC12
Similar products from: Safety Accessories
What can I help you find today?
