117328 Euchner Safety Proximity Sensors
Part#:117328
Alt. Part#:CES-I-AP-M-C04-U05-117328
Manufacturer:Euchner
Category:Safety Proximity Sensors
Product Lifecycle:Active
Mar 15, 2025
Product description
117328 Euchner - Non-contact safety switches CES-I-AP-.- C04-…, flying lead
Product Details
- Weight 0.5070626 lb
- Series CES-AP
- Product Class Safety System
- Assured release distance Sar max.60 mm
- Switching hysteresis min.1 mm
- Assured operating distance Sao min.10 mm
- Operating distance 11 mm
- Mission time 20
- Performance Level PL e
- PFHD 4.1 x 10⁻⁹
- Category 4
- For the approval acc. to UL the following applies Operation only with UL class 2 power supply, or equivalent measures
- Additional feature Rubber support included
- Repeat accuracy R ≤ 10
- Off-state current Ir max.0,25 mA
- Discrepancy time max.10 ms
- Rated conditional short-circuit current 100 A
- Utilization category acc. to EN 60947-5-2 24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
- Test-pulse interval min.100 ms
- Type of output p-switching, short circuit-proof
- Switching current max.50 mA
- Output voltage 0,8 x UB ... UB V DC
- Test pulses max.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
- Risk time according to EN 60947-5-3 max.260 ms
- Rated insulation voltage Ui 300 V
- Safety class III
- Turn-on time max.300 ms
- Degree of contamination (external, according to EN 60947-1) 3
- Rated impulse withstand voltage Uimp 1,5 kV
- EMC protection requirements In acc. with EN IEC 60947-5-3
- Fusing 0,25 ... 8 A
- Connection connection cable PUR, length 5m
- Current consumption max.35 mA
- Ready delay 0,5 s
- Operating voltage DC 24 V DC 15% ... 15% Regulated, residual ripple < 5%, PELV (The device tolerates voltage interruptions in the operating voltage, e.g. test pulses, of up to 5 ms. These voltage interruptions are also output on the outputs.)
- Tightening torque max.0,8 Nm
- Installation orientation Any
- Switching frequency max.1 Hz
- Mounting distance min.80 mm
- Mounting method Surface mounting on metal
- Dynamic bending radius 10 x cable diameter
- Degree of protection IP67
- Material NBR 80 ±5 Shore
- Static bending radius 5 x cable diameter
- Cable ambient temperature (dynamic) -25 ... 65 °C
- Weight 0,2 kg
- Cable ambient temperature (static) -25 ... 65 °C
- Housing material Plastic, PBT
- Shock and vibration resistance In acc. with EN 60947-5-3
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 117328 on MQ Automation is $210.88. Order now.
About the product
Safety switch with integrated evaluation electronics;No series connection;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;Three active faces;Connecting cable PUR, 5 m, flying lead;Multicode;Monitoring output OD
This item can ship in 3-5 days!
Manufacturer warranty
117328 Euchner
$210.88
Your price can be lower.
Log in or Create account to check your discount
Stock:
Select Qty:
$210.88
$210.88 each
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 117328 with other products
Weight
Series
Product Class
Assured release distance ...
Switching hysteresis
Assured operating distanc...
Operating distance
Mission time
Performance Level
PFHD
Category
For the approval acc. to ...
Additional feature
Repeat accuracy R
Off-state current Ir
Discrepancy time
Rated conditional short-c...
Utilization category acc....
Test-pulse interval
Type of output
Switching current
Output voltage
Test pulses
Risk time according to EN...
Rated insulation voltage ...
Safety class
Turn-on time
Degree of contamination (...
Rated impulse withstand v...
EMC protection requiremen...
Fusing
Connection
Current consumption
Ready delay
Operating voltage DC
Tightening torque
Installation orientation
Switching frequency
Mounting distance
Mounting method
Dynamic bending radius
Degree of protection
Material
Static bending radius
Cable ambient temperature...
Cable ambient temperature...
Housing material
Shock and vibration resis...
Extension of risk time ac...
Selected product
Weight0.5070626 lb
SeriesCES-AP
Product ClassSafety System
Assured release distance Sarmax.60 mm
Switching hysteresismin.1 mm
Assured operating distance Saomin.10 mm
Operating distance11 mm
Mission time20
Performance LevelPL e
PFHD4.1 x 10⁻⁹
Category4
For the approval acc. to UL the following appliesOperation only with UL class...
Additional featureRubber support included
Repeat accuracy R≤ 10
Off-state current Irmax.0,25 mA
Discrepancy timemax.10 ms
Rated conditional short-circuit current100 A
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Test-pulse intervalmin.100 ms
Type of outputp-switching, short circuit-p...
Switching currentmax.50 mA
Output voltage0,8 x UB ... UB V DC
Test pulsesmax.0,3 ms (Applies for a l...
Risk time according to EN 60947-5-3max.260 ms
Rated insulation voltage Ui300 V
Safety classIII
Turn-on timemax.300 ms
Degree of contamination (external, according to EN 60947-1)3
Rated impulse withstand voltage Uimp1,5 kV
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Fusing0,25 ... 8 A
Connectionconnection cable PUR, length...
Current consumptionmax.35 mA
Ready delay0,5 s
Operating voltage DC24 V DC 15% ... 15% Regu...
Tightening torquemax.0,8 Nm
Installation orientationAny
Switching frequencymax.1 Hz
Mounting distancemin.80 mm
Mounting methodSurface mounting on metal
Dynamic bending radius10 x cable diameter
Degree of protectionIP67
MaterialNBR 80 ±5 Shore
Static bending radius5 x cable diameter
Cable ambient temperature (dynamic)-25 ... 65 °C
Cable ambient temperature (static)-25 ... 65 °C
Housing materialPlastic, PBT
Shock and vibration resistanceIn acc. with EN 60947-5-3
Extension of risk time according to EN 60947-5-3 per device-
Weight0.23589434 lb
SeriesCES-AR
Product ClassSafety System
Assured release distance Sarmax.60 mm
Switching hysteresismin.1 mm
Assured operating distance Sao6
Operating distance11 mm
Mission time20
Performance LevelPL e
PFHD4.1 x 10⁻⁹
Category4
For the approval acc. to UL the following appliesOperation only with UL class...
Additional featureRubber support included
Repeat accuracy R≤ 10
Off-state current Irmax.0,25 mA
Discrepancy timemax.10 ms
Rated conditional short-circuit current100 A
Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...
Test-pulse intervalmin.140 ms
Type of outputSemiconductor output, p-swit...
Switching currentmax.50 mA
Output voltage0,8 x UB ... UB V DC
Test pulsesmax.1,0 ms (Applies for a l...
Risk time according to EN 60947-5-3max.260 ms
Rated insulation voltage Ui300 V
Safety classIII
Turn-on timemax.400 ms
Degree of contamination (external, according to EN 60947-1)3
Rated impulse withstand voltage Uimp1,5 kV
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Fusing0,25 ... 8 A
ConnectionConnection cable PUR, length...
Current consumptionmax.35 mA (Without taking i...
Ready delay10 s
Operating voltage DC24 V DC 15% ... 15% Regu...
Tightening torquemax.0,8 Nm
Installation orientationAny
Switching frequencymax.1 Hz
Mounting distancemin.80 mm
Mounting methodSurface mounting on metal
Dynamic bending radius10 x cable diameter
Degree of protectionIP67
MaterialNBR 80 ±5 Shore
Static bending radius5 x cable diameter
Cable ambient temperature (dynamic)-25 ... 65 °C
Cable ambient temperature (static)-25 ... 65 °C
Housing materialPlastic, PBT
Shock and vibration resistanceIn acc. with EN 60947-5-3
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Weight0.52029032 lb
SeriesCES-AP
Product ClassSafety System
Assured release distance Sarmax.60 mm
Switching hysteresismin.1 mm
Assured operating distance Saomin.14 mm
Operating distance19 mm
Mission time20
Performance LevelPL e
PFHD1.8 x 10⁻⁹
Category4
For the approval acc. to UL the following appliesOperation only with UL class...
Additional feature-
Repeat accuracy R≤ 10
Off-state current Irmax.0,25 mA
Discrepancy timemax.10 ms
Rated conditional short-circuit current100 A
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Test-pulse intervalmin.100 ms
Type of outputp-switching, short circuit-p...
Switching currentmax.50 mA
Output voltage0,8 x UB ... UB V DC
Test pulsesmax.0,3 ms (Applies for a l...
Risk time according to EN 60947-5-3max.260 ms
Rated insulation voltage Ui75 V
Safety classIII
Turn-on timemax.300 ms
Degree of contamination (external, according to EN 60947-1)3
Rated impulse withstand voltage Uimp1,5 kV
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Fusing0,25 ... 8 A
Connectionconnection cable PVC, length...
Current consumptionmax.30 mA (Without taking i...
Ready delay0,5 s
Operating voltage DC24 V DC 15% ... 15% Regu...
Tightening torquemax.1 Nm
Installation orientationAny
Switching frequencymax.1 Hz
Mounting distancemin.400 mm
Mounting methodSurface mounting on metal
Dynamic bending radius10 x cable diameter
Degree of protectionIP67, IP69K
Material-
Static bending radius5 x cable diameter
Cable ambient temperature (dynamic)0 ... 65 °C
Cable ambient temperature (static)-40 ... 65 °C
Housing materialPlastic, PBT
Shock and vibration resistanceIn acc. with EN 60947-5-3
Extension of risk time according to EN 60947-5-3 per device-
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 117328?
The price of 117328 on MQ Automation is $210.88. Order now.
Out if stock but available for backorder.
117328 Euchner - Non-contact safety switches CES-I-AP-.- C04-…, flying lead
Similar products from: Safety Proximity Sensors
What can I help you find today?
