117324 Euchner Safety Proximity Sensors
Part#:117324
Alt. Part#:CES-I-AP-M-C04-USB-117324
Manufacturer:Euchner
Category:Safety Proximity Sensors
Product Lifecycle:Active
Mar 15, 2025
Product description
117324 Euchner - Non-contact safety switches CES-I-AP-.-C04-…, M12
Product Details
- Weight 0.1873927 lb
- Series CES-AP
- Product Class Safety System
- Switching hysteresis min.1 mm
- Assured operating distance Sao min.10 mm
- Assured release distance Sar max.60 mm
- Performance Level PL e
- Operating distance 11 mm
- Mission time 20
- PFHD 4.1 x 10⁻⁹
- Category 4
- For the approval acc. to UL the following applies Operation only with UL class 2 power supply, or equivalent measures
- Additional feature Rubber support included
- Repeat accuracy R ≤ 10
- Discrepancy time max.10 ms
- Off-state current Ir max.0,25 mA
- Rated conditional short-circuit current 100 A
- Test-pulse interval min.100 ms
- Test pulses max.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
- Utilization category acc. to EN 60947-5-2 24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
- Risk time according to EN 60947-5-3 max.260 ms
- Type of output p-switching, short circuit-proof
- Output voltage 0,8 x UB ... UB V DC
- Switching current max.50 mA
- Degree of contamination (external, according to EN 60947-1) 3
- Safety class III
- Turn-on time max.300 ms
- EMC protection requirements In acc. with EN IEC 60947-5-3
- Fusing 0,25 ... 8 A
- Rated impulse withstand voltage Uimp 1,5 kV
- Rated insulation voltage Ui 300 V
- Operating voltage DC 24 V DC 15% ... 15% Regulated, residual ripple < 5%, PELV (The device tolerates voltage interruptions in the operating voltage, e.g. test pulses, of up to 5 ms. These voltage interruptions are also output on the outputs.)
- Current consumption max.35 mA
- Mounting method Surface mounting on metal
- Switching frequency max.1 Hz
- Connection PUR cable 200mm with plug connector M12x1, 5-pin
- Installation orientation Any
- Mounting distance min.80 mm
- Ready delay 0,5 s
- Tightening torque max.0,8 Nm
- Degree of protection IP67
- Weight 0,05 kg
- Dynamic bending radius 10 x cable diameter
- Static bending radius 5 x cable diameter
- Housing material Plastic, PBT
- Shock and vibration resistance In acc. with EN 60947-5-3
- Material NBR 80 ±5 Shore
- Cable ambient temperature (dynamic) -25 ... 65 °C
- Cable ambient temperature (static) -25 ... 65 °C
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 117324 on MQ Automation is $176.92. Order now.
About the product
Safety switch with integrated evaluation electronics;No series connection;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;Three active faces;Connecting cable PUR, 0.22 m, plug connector M12, 5-core;Multicode;Monitoring output OD
This item can ship in 3-5 days!
Manufacturer warranty
117324 Euchner
$176.92
Your price can be lower.
Log in or Create account to check your discount
Stock:
Select Qty:
$176.92
$176.92 each
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 117324 with other products
Weight
Series
Product Class
Switching hysteresis
Assured operating distanc...
Assured release distance ...
Performance Level
Operating distance
Mission time
PFHD
Category
For the approval acc. to ...
Additional feature
Repeat accuracy R
Discrepancy time
Off-state current Ir
Rated conditional short-c...
Test-pulse interval
Test pulses
Utilization category acc....
Risk time according to EN...
Type of output
Output voltage
Switching current
Degree of contamination (...
Safety class
Turn-on time
EMC protection requiremen...
Fusing
Rated impulse withstand v...
Rated insulation voltage ...
Operating voltage DC
Current consumption
Mounting method
Switching frequency
Connection
Installation orientation
Mounting distance
Ready delay
Tightening torque
Degree of protection
Dynamic bending radius
Static bending radius
Housing material
Shock and vibration resis...
Material
Cable ambient temperature...
Cable ambient temperature...
Extension of risk time ac...
Selected product
Weight0.1873927 lb
SeriesCES-AP
Product ClassSafety System
Switching hysteresismin.1 mm
Assured operating distance Saomin.10 mm
Assured release distance Sarmax.60 mm
Performance LevelPL e
Operating distance11 mm
Mission time20
PFHD4.1 x 10⁻⁹
Category4
For the approval acc. to UL the following appliesOperation only with UL class...
Additional featureRubber support included
Repeat accuracy R≤ 10
Discrepancy timemax.10 ms
Off-state current Irmax.0,25 mA
Rated conditional short-circuit current100 A
Test-pulse intervalmin.100 ms
Test pulsesmax.0,3 ms (Applies for a l...
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Risk time according to EN 60947-5-3max.260 ms
Type of outputp-switching, short circuit-p...
Output voltage0,8 x UB ... UB V DC
Switching currentmax.50 mA
Degree of contamination (external, according to EN 60947-1)3
Safety classIII
Turn-on timemax.300 ms
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Fusing0,25 ... 8 A
Rated impulse withstand voltage Uimp1,5 kV
Rated insulation voltage Ui300 V
Operating voltage DC24 V DC 15% ... 15% Regu...
Current consumptionmax.35 mA
Mounting methodSurface mounting on metal
Switching frequencymax.1 Hz
ConnectionPUR cable 200mm with plug co...
Installation orientationAny
Mounting distancemin.80 mm
Ready delay0,5 s
Tightening torquemax.0,8 Nm
Degree of protectionIP67
Dynamic bending radius10 x cable diameter
Static bending radius5 x cable diameter
Housing materialPlastic, PBT
Shock and vibration resistanceIn acc. with EN 60947-5-3
MaterialNBR 80 ±5 Shore
Cable ambient temperature (dynamic)-25 ... 65 °C
Cable ambient temperature (static)-25 ... 65 °C
Extension of risk time according to EN 60947-5-3 per device-
Weight0.23589434 lb
SeriesCES-AR
Product ClassSafety System
Switching hysteresismin.1 mm
Assured operating distance Sao6
Assured release distance Sarmax.60 mm
Performance LevelPL e
Operating distance11 mm
Mission time20
PFHD4.1 x 10⁻⁹
Category4
For the approval acc. to UL the following appliesOperation only with UL class...
Additional featureRubber support included
Repeat accuracy R≤ 10
Discrepancy timemax.10 ms
Off-state current Irmax.0,25 mA
Rated conditional short-circuit current100 A
Test-pulse intervalmin.140 ms
Test pulsesmax.1,0 ms (Applies for a l...
Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...
Risk time according to EN 60947-5-3max.260 ms
Type of outputSemiconductor output, p-swit...
Output voltage0,8 x UB ... UB V DC
Switching currentmax.50 mA
Degree of contamination (external, according to EN 60947-1)3
Safety classIII
Turn-on timemax.400 ms
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Fusing0,25 ... 8 A
Rated impulse withstand voltage Uimp1,5 kV
Rated insulation voltage Ui300 V
Operating voltage DC24 V DC 15% ... 15% Regu...
Current consumptionmax.35 mA (Without taking i...
Mounting methodSurface mounting on metal
Switching frequencymax.1 Hz
ConnectionConnection cable PUR, length...
Installation orientationAny
Mounting distancemin.80 mm
Ready delay10 s
Tightening torquemax.0,8 Nm
Degree of protectionIP67
Dynamic bending radius10 x cable diameter
Static bending radius5 x cable diameter
Housing materialPlastic, PBT
Shock and vibration resistanceIn acc. with EN 60947-5-3
MaterialNBR 80 ±5 Shore
Cable ambient temperature (dynamic)-25 ... 65 °C
Cable ambient temperature (static)-25 ... 65 °C
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Weight0.52029032 lb
SeriesCES-AP
Product ClassSafety System
Switching hysteresismin.1 mm
Assured operating distance Saomin.14 mm
Assured release distance Sarmax.60 mm
Performance LevelPL e
Operating distance19 mm
Mission time20
PFHD1.8 x 10⁻⁹
Category4
For the approval acc. to UL the following appliesOperation only with UL class...
Additional feature-
Repeat accuracy R≤ 10
Discrepancy timemax.10 ms
Off-state current Irmax.0,25 mA
Rated conditional short-circuit current100 A
Test-pulse intervalmin.100 ms
Test pulsesmax.0,3 ms (Applies for a l...
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Risk time according to EN 60947-5-3max.260 ms
Type of outputp-switching, short circuit-p...
Output voltage0,8 x UB ... UB V DC
Switching currentmax.50 mA
Degree of contamination (external, according to EN 60947-1)3
Safety classIII
Turn-on timemax.300 ms
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Fusing0,25 ... 8 A
Rated impulse withstand voltage Uimp1,5 kV
Rated insulation voltage Ui75 V
Operating voltage DC24 V DC 15% ... 15% Regu...
Current consumptionmax.30 mA (Without taking i...
Mounting methodSurface mounting on metal
Switching frequencymax.1 Hz
Connectionconnection cable PVC, length...
Installation orientationAny
Mounting distancemin.400 mm
Ready delay0,5 s
Tightening torquemax.1 Nm
Degree of protectionIP67, IP69K
Dynamic bending radius10 x cable diameter
Static bending radius5 x cable diameter
Housing materialPlastic, PBT
Shock and vibration resistanceIn acc. with EN 60947-5-3
Material-
Cable ambient temperature (dynamic)0 ... 65 °C
Cable ambient temperature (static)-40 ... 65 °C
Extension of risk time according to EN 60947-5-3 per device-
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 117324?
The price of 117324 on MQ Automation is $176.92. Order now.
Out if stock but available for backorder.
117324 Euchner - Non-contact safety switches CES-I-AP-.-C04-…, M12
Similar products from: Safety Proximity Sensors
What can I help you find today?
