122406 Euchner Safety Proximity Sensors

122406 on MQ Automation
Euchner
  • 122406
  • 122406
  • 122406

Part#:122406

Alt. Part#:CET3-AP-CRA-AH-50X-SA-122406

Manufacturer:Euchner

Category:Safety Proximity Sensors

Product Lifecycle:Active

10 in stock

Mar 15, 2025

Product description

122406 Euchner - Non-contact safety switch CET-AP-..., M12

Product Details

  • Weight
    2.74695652 lb
  • Series
    CET-AP
  • Product Class
    Safety System
  • Mission time
    20 y
  • PFHD
    3.1 x 10⁻⁹
  • Performance Level
    PL e
  • Category
    4
  • Switching delay from state change
    max.400 ms
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures see operating instructions
  • Discrepancy time
    max.10 ms
  • Repeat accuracy R
    10 %
  • Turn-on time
    400 ms
  • Output voltage
    0 ... 1 V DC
  • Switching load
    24V DC, class 2 (For alternatives see operating instructions)
  • Off-state current Ir
    max.0,25 mA
  • Safety class
    III
  • Risk time according to EN 60947-5-3
    max.400 ms
  • Switching current
    1 ... 200 mA
  • Type of output
    2 semiconductor outputs, p-switching, short circuit-proof
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Connecting cable
    30V DC, 2A (For UL requirement UL category code (CYJV/CYJV7))
  • Connection rating
    11 W
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Fusing
    0,5 ... 8 A
  • Solenoid duty cycle
    100 %
  • Utilization category acc. to EN 60947-5-2
    24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
  • Solenoid operating voltage DC
    24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Current consumption
    80 mA
  • Operating voltage DC
    24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV (The device tolerates voltage interruptions of up to 5ms)
  • Locking force FZh
    5000 N (FZH = FMAX/1.3)
  • Locking force Fmax
    6500 N
  • Connection
    1 plug connector M12, 8-pin
  • Approach speed
    max.20 m/min
  • Guard locking principle
    Closed-circuit current principle
  • Ready delay
    1 s
  • Installation orientation
    Any (Preferably head downward)
  • Switching frequency
    max.0,5 Hz
  • Housing material
    Stainless steel
  • Mechanical life
    1 x 10⁶
  • Weight
    1 kg
  • Degree of freedom Y
    ±5 mm
  • Degree of freedom Z
    ±4 mm
  • Ambient temperature
    -20 ... 55 °C
  • Degree of protection
    IP67 (Screwed tight plug connector/mating component)
  • Shock and vibration resistance
    In acc. with EN 60947-5-3
  • Degree of freedom X
    ±5 mm

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 122406 on MQ Automation is $830.64. Order now.


About the product

Safety switch with guard locking and integrated evaluation electronics;Locking force up to 6500 N;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;With 1 plug connector M12, 8-pin;Unicode;Door monitoring output;Indication of the door position by LED;Monitoring output DIA;Approach direction A (delivery state)


This item can ship in 3-5 days!

Manufacturer warranty

122406 Euchner

$830.64

Your price can be lower.
Log in or Create account to check your discount

Stock:

10

Select Qty:

$830.64

$830.64 each

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 122406 with other products

Weight

Series

Product Class

Mission time

PFHD

Performance Level

Category

Switching delay from stat...

For the approval acc. to ...

Discrepancy time

Repeat accuracy R

Turn-on time

Output voltage

Switching load

Off-state current Ir

Safety class

Risk time according to EN...

Switching current

Type of output

Degree of contamination (...

Connecting cable

Connection rating

EMC protection requiremen...

Fusing

Solenoid duty cycle

Utilization category acc....

Solenoid operating voltag...

Current consumption

Operating voltage DC

Locking force FZh

Locking force Fmax

Connection

Approach speed

Guard locking principle

Ready delay

Installation orientation

Switching frequency

Housing material

Mechanical life

Degree of freedom Y

Degree of freedom Z

Ambient temperature

Degree of protection

Shock and vibration resis...

Degree of freedom X

Additional feature

Rated impulse withstand v...

Rated insulation voltage ...

Test pulses

Test-pulse interval

Actuating force

Extension of risk time ac...

Extraction force

Overtravel

Retention force

B10D

Version

Operating current

Switching element

Detent mechanism

Operating voltage

Selected product

122406
10 in stock
122406
Euchner

122406 Euchner - Non-contact safety switch CET-AP-..., M12

Weight2.74695652 lb

SeriesCET-AP

Product ClassSafety System

Mission time20 y

PFHD3.1 x 10⁻⁹

Performance LevelPL e

Category4

Switching delay from state changemax.400 ms

For the approval acc. to UL the following appliesOperation only with UL class...

Discrepancy timemax.10 ms

Repeat accuracy R10 %

Turn-on time400 ms

Output voltage0 ... 1 V DC

Switching load24V DC, class 2 (For altern...

Off-state current Irmax.0,25 mA

Safety classIII

Risk time according to EN 60947-5-3max.400 ms

Switching current1 ... 200 mA

Type of output2 semiconductor outputs, p-s...

Degree of contamination (external, according to EN 60947-1)3

Connecting cable30V DC, 2A (For UL requirem...

Connection rating11 W

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Fusing0,5 ... 8 A

Solenoid duty cycle100 %

Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Current consumption80 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Locking force FZh5000 N (FZH = FMAX/1.3)

Locking force Fmax6500 N

Connection1 plug connector M12, 8-pin

Approach speedmax.20 m/min

Guard locking principleClosed-circuit current princ...

Ready delay1 s

Installation orientationAny (Preferably head downwa...

Switching frequencymax.0,5 Hz

Housing materialStainless steel

Mechanical life1 x 10⁶

Degree of freedom Y±5 mm

Degree of freedom Z±4 mm

Ambient temperature-20 ... 55 °C

Degree of protectionIP67 (Screwed tight plug co...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of freedom X±5 mm

Additional feature-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Test pulses-

Test-pulse interval-

Actuating force-

Extension of risk time according to EN 60947-5-3 per device-

Extraction force-

Overtravel-

Retention force-

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Performance LevelPL e

Category4

Switching delay from state change-

For the approval acc. to UL the following appliesOperation only with UL class...

Discrepancy timemax.10 ms In acc. with EN ...

Repeat accuracy R10 %

Turn-on timemax.400 ms

Output voltage0,8xUB ... UB V DC

Switching load24V DC, class 2 (Alternativ...

Off-state current Irmax.0,25 mA

Safety classIII

Risk time according to EN 60947-5-3max.260 ms

Switching current1 ... 50 mA

Type of outputp-switching, short circuit-p...

Degree of contamination (external, according to EN 60947-1)3

Connecting cable-

Connection rating6 W

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Fusing0,25 ... 8 A

Solenoid duty cycle100 %

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Locking force Fmax3900 N

Connection2 plug connectors M12, 5 and...

Approach speedmax.20 m/min

Guard locking principleClosed-circuit current princ...

Ready delay8 s

Installation orientationAny

Switching frequencymax.0,5 Hz

Housing materialDie-cast zinc

Mechanical life1 x 10⁶

Degree of freedom Y-

Degree of freedom Z-

Ambient temperature-20 ... +55 °C

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of freedom X-

Additional featureEscape release actuated by p...

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.1,0 ms (Applies for a l...

Test-pulse intervalmin.140 ms

Actuating force10 N

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Extraction force20 N

Overtravel5 mm

Retention force20 N

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Performance LevelPL e

Category4

Switching delay from state change-

For the approval acc. to UL the following appliesOperation only with UL class...

Discrepancy timemax.10 ms In acc. with EN ...

Repeat accuracy R10 %

Turn-on timemax.400 ms

Output voltage0 ... 1 V DC

Switching load24V DC, class 2 (Alternativ...

Off-state current Irmax.0,25 mA

Safety classIII

Risk time according to EN 60947-5-3-

Switching current1 ... 150 mA

Type of output2 semiconductor outputs, p-s...

Degree of contamination (external, according to EN 60947-1)3

Connecting cable-

Connection rating1 W

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Fusing0,25 ... 8 A

Solenoid duty cycle-

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Solenoid operating voltage DC-

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Locking force FZh-

Locking force Fmax-

Connection2 plug connectors M12, 5-pin

Approach speedmax.20 m/min

Guard locking principle-

Ready delaymax.1 s

Installation orientationDoor hinge DIN right

Switching frequencymax.0,5 Hz

Housing materialFiber glass reinforced therm...

Mechanical life1 x 10⁶

Degree of freedom Y-

Degree of freedom Z-

Ambient temperature-20 ... +55 °C

Degree of protectionIP65 (Screwed tight plug co...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of freedom X-

Additional feature-

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.0,3 ms (Applies for a l...

Test-pulse intervalmin.100 ms

Actuating force10 N

Extension of risk time according to EN 60947-5-3 per device-

Extraction force20 N

Overtravel5 mm

Retention force-

B10D0,13 x 10⁶

VersionEmergency stop

Operating current1 ... 100 mA

Switching element2 pos. driven NC

Detent mechanismSnap-in bolt

Operating voltage5 ... 24 V

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

Relevant products

FAQ

What is the price of 122406?
The price of 122406 on MQ Automation is $830.64. Order now.

Out if stock but available for backorder.

122406 Euchner - Non-contact safety switch CET-AP-..., M12

What can I help you find today?

Recommended parts