122413 Euchner Safety Proximity Sensors

122413 on MQ Automation
Euchner
  • 122413
  • 122413
  • 122413

Part#:122413

Alt. Part#:CET4-AP-CRA-CH-50X-SA-122413

Manufacturer:Euchner

Category:Safety Proximity Sensors

Product Lifecycle:Active

Product description

122413 Euchner - Non-contact safety switch CET-AP-..., M12

Product Details

  • Weight
    2.80427664 lb
  • Series
    CET-AP
  • Product Class
    Safety System
  • Mission time
    20 y
  • Performance Level
    PL e
  • PFHD
    3.1 x 10⁻⁹
  • Repeat accuracy R
    10 %
  • Switching delay from state change
    max.400 ms
  • Category
    4
  • Discrepancy time
    max.10 ms
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures see operating instructions
  • Risk time according to EN 60947-5-3
    max.400 ms
  • Turn-on time
    400 ms
  • Solenoid duty cycle
    100 %
  • Switching current
    1 ... 200 mA
  • Type of output
    2 semiconductor outputs, p-switching, short circuit-proof
  • Connecting cable
    30V DC, 2A (For UL requirement UL category code (CYJV/CYJV7))
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Off-state current Ir
    max.0,25 mA
  • Switching load
    24V DC, class 2 (For alternatives see operating instructions)
  • Safety class
    III
  • Output voltage
    UB-1,5V ... UB V DC
  • Guard locking principle
    Open-circuit current principle
  • Fusing
    0,5 ... 8 A
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Connection rating
    11 W
  • Installation orientation
    Any (Preferably head downward)
  • Solenoid operating voltage DC
    24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Current consumption
    80 mA
  • Utilization category acc. to EN 60947-5-2
    24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
  • Locking force FZh
    5000 N (FZH = FMAX/1.3)
  • Operating voltage DC
    24 V DC -15% ... 10%
  • Approach speed
    max.20 m/min
  • Locking force Fmax
    6500 N
  • Connection
    1 plug connector M12, 8-pin
  • Ready delay
    1 s
  • Shock and vibration resistance
    In acc. with EN 60947-5-3
  • Switching frequency
    max.0,5 Hz
  • Weight
    1 kg
  • Mechanical life
    1 x 10⁶
  • Ambient temperature
    -20 ... 55 °C
  • Housing material
    Stainless steel
  • Degree of freedom Z
    ±4 mm
  • Degree of freedom Y
    ±5 mm
  • Degree of protection
    IP67 (Screwed tight plug connector/mating component)
  • Degree of freedom X
    ±5 mm

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 122413 on MQ Automation is $749.72. Order now.


About the product

Safety switch with guard locking and integrated evaluation electronics;Locking force up to 6500 N;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;With 1 plug connector M12, 8-pin;Multicode;Door monitoring output;Indication of the door position by LED;Approach direction A (delivery state)


Manufacturer warranty

122413 Euchner

$749.72

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$749.72

$749.72 each

Average response time: 11 minutes

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 122413 with other products

Weight

Series

Product Class

Mission time

Performance Level

PFHD

Repeat accuracy R

Switching delay from stat...

Category

Discrepancy time

For the approval acc. to ...

Risk time according to EN...

Turn-on time

Solenoid duty cycle

Switching current

Type of output

Connecting cable

Degree of contamination (...

Off-state current Ir

Switching load

Safety class

Output voltage

Guard locking principle

Fusing

EMC protection requiremen...

Connection rating

Installation orientation

Solenoid operating voltag...

Current consumption

Utilization category acc....

Locking force FZh

Operating voltage DC

Approach speed

Locking force Fmax

Connection

Ready delay

Shock and vibration resis...

Switching frequency

Mechanical life

Ambient temperature

Housing material

Degree of freedom Z

Degree of freedom Y

Degree of protection

Degree of freedom X

Additional feature

Rated impulse withstand v...

Rated insulation voltage ...

Test pulses

Test-pulse interval

Actuating force

Extension of risk time ac...

Extraction force

Overtravel

Retention force

B10D

Version

Operating current

Switching element

Detent mechanism

Operating voltage

Selected product

122413
0 in stock
122413
Euchner

122413 Euchner - Non-contact safety switch CET-AP-..., M12

Weight2.80427664 lb

SeriesCET-AP

Product ClassSafety System

Mission time20 y

Performance LevelPL e

PFHD3.1 x 10⁻⁹

Repeat accuracy R10 %

Switching delay from state changemax.400 ms

Category4

Discrepancy timemax.10 ms

For the approval acc. to UL the following appliesOperation only with UL class...

Risk time according to EN 60947-5-3max.400 ms

Turn-on time400 ms

Solenoid duty cycle100 %

Switching current1 ... 200 mA

Type of output2 semiconductor outputs, p-s...

Connecting cable30V DC, 2A (For UL requirem...

Degree of contamination (external, according to EN 60947-1)3

Off-state current Irmax.0,25 mA

Switching load24V DC, class 2 (For altern...

Safety classIII

Output voltageUB-1,5V ... UB V DC

Guard locking principleOpen-circuit current princip...

Fusing0,5 ... 8 A

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating11 W

Installation orientationAny (Preferably head downwa...

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Current consumption80 mA

Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...

Locking force FZh5000 N (FZH = FMAX/1.3)

Operating voltage DC24 V DC -15% ... 10%

Approach speedmax.20 m/min

Locking force Fmax6500 N

Connection1 plug connector M12, 8-pin

Ready delay1 s

Shock and vibration resistanceIn acc. with EN 60947-5-3

Switching frequencymax.0,5 Hz

Mechanical life1 x 10⁶

Ambient temperature-20 ... 55 °C

Housing materialStainless steel

Degree of freedom Z±4 mm

Degree of freedom Y±5 mm

Degree of protectionIP67 (Screwed tight plug co...

Degree of freedom X±5 mm

Additional feature-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Test pulses-

Test-pulse interval-

Actuating force-

Extension of risk time according to EN 60947-5-3 per device-

Extraction force-

Overtravel-

Retention force-

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

Mission time20 y

Performance LevelPL e

PFHD4.1 x 10 ⁻⁹

Repeat accuracy R10 %

Switching delay from state change-

Category4

Discrepancy timemax.10 ms In acc. with EN ...

For the approval acc. to UL the following appliesOperation only with UL class...

Risk time according to EN 60947-5-3max.260 ms

Turn-on timemax.400 ms

Solenoid duty cycle100 %

Switching current1 ... 50 mA

Type of outputp-switching, short circuit-p...

Connecting cable-

Degree of contamination (external, according to EN 60947-1)3

Off-state current Irmax.0,25 mA

Switching load24V DC, class 2 (Alternativ...

Safety classIII

Output voltage0,8xUB ... UB V DC

Guard locking principleClosed-circuit current princ...

Fusing0,25 ... 8 A

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating6 W

Installation orientationAny

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Current consumption40 mA

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Operating voltage DC24 V DC -15% ... 15% Rev...

Approach speedmax.20 m/min

Locking force Fmax3900 N

Connection2 plug connectors M12, 5 and...

Ready delay8 s

Shock and vibration resistanceIn acc. with EN 60947-5-3

Switching frequencymax.0,5 Hz

Mechanical life1 x 10⁶

Ambient temperature-20 ... +55 °C

Housing materialDie-cast zinc

Degree of freedom Z-

Degree of freedom Y-

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Degree of freedom X-

Additional featureEscape release actuated by p...

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.1,0 ms (Applies for a l...

Test-pulse intervalmin.140 ms

Actuating force10 N

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Extraction force20 N

Overtravel5 mm

Retention force20 N

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

Mission time20 y

Performance LevelPL e

PFHD4.1 x 10 ⁻⁹

Repeat accuracy R10 %

Switching delay from state change-

Category4

Discrepancy timemax.10 ms In acc. with EN ...

For the approval acc. to UL the following appliesOperation only with UL class...

Risk time according to EN 60947-5-3-

Turn-on timemax.400 ms

Solenoid duty cycle-

Switching current1 ... 150 mA

Type of output2 semiconductor outputs, p-s...

Connecting cable-

Degree of contamination (external, according to EN 60947-1)3

Off-state current Irmax.0,25 mA

Switching load24V DC, class 2 (Alternativ...

Safety classIII

Output voltage0 ... 1 V DC

Guard locking principle-

Fusing0,25 ... 8 A

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating1 W

Installation orientationDoor hinge DIN right

Solenoid operating voltage DC-

Current consumption40 mA

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Locking force FZh-

Operating voltage DC24 V DC -15% ... 15% Rev...

Approach speedmax.20 m/min

Locking force Fmax-

Connection2 plug connectors M12, 5-pin

Ready delaymax.1 s

Shock and vibration resistanceIn acc. with EN 60947-5-3

Switching frequencymax.0,5 Hz

Mechanical life1 x 10⁶

Ambient temperature-20 ... +55 °C

Housing materialFiber glass reinforced therm...

Degree of freedom Z-

Degree of freedom Y-

Degree of protectionIP65 (Screwed tight plug co...

Degree of freedom X-

Additional feature-

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.0,3 ms (Applies for a l...

Test-pulse intervalmin.100 ms

Actuating force10 N

Extension of risk time according to EN 60947-5-3 per device-

Extraction force20 N

Overtravel5 mm

Retention force-

B10D0,13 x 10⁶

VersionEmergency stop

Operating current1 ... 100 mA

Switching element2 pos. driven NC

Detent mechanismSnap-in bolt

Operating voltage5 ... 24 V

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

Relevant products

FAQ

What is the price of 122413?
The price of 122413 on MQ Automation is $749.72. Order now.

Out if stock but available for backorder.

122413 Euchner - Non-contact safety switch CET-AP-..., M12

What can I help you find today?

Recommended parts