122409 Euchner Safety Proximity Sensors

122409 on MQ Automation
Euchner
  • 122409
  • 122409
  • 122409

Part#:122409

Alt. Part#:CET3-AP-CRA-CH-50X-SA-122409

Manufacturer:Euchner

Category:Safety Proximity Sensors

Product Lifecycle:Active

22 in stock

Mar 16, 2025

Product description

122409 Euchner - Non-contact safety switch CET-AP-..., M12

Product Details

  • Weight
    2.80648126 lb
  • Series
    CET-AP
  • Product Class
    Safety System
  • Mission time
    20 y
  • PFHD
    3.1 x 10⁻⁹
  • Performance Level
    PL e
  • Category
    4
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures see operating instructions
  • Repeat accuracy R
    10 %
  • Switching delay from state change
    max.400 ms
  • Turn-on time
    400 ms
  • Risk time according to EN 60947-5-3
    max.400 ms
  • Discrepancy time
    max.10 ms
  • Off-state current Ir
    max.0,25 mA
  • Output voltage
    0 ... 1 V DC
  • Type of output
    2 semiconductor outputs, p-switching, short circuit-proof
  • Switching current
    1 ... 200 mA
  • Switching load
    24V DC, class 2 (For alternatives see operating instructions)
  • Safety class
    III
  • Connecting cable
    30V DC, 2A (For UL requirement UL category code (CYJV/CYJV7))
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Solenoid duty cycle
    100 %
  • Connection rating
    11 W
  • Fusing
    0,25 ... 8 A
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Solenoid operating voltage DC
    24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Operating voltage DC
    24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV (The device tolerates voltage interruptions of up to 5ms)
  • Utilization category acc. to EN 60947-5-2
    24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
  • Current consumption
    80 mA
  • Locking force FZh
    5000 N (FZH = FMAX/1.3)
  • Guard locking principle
    Closed-circuit current principle
  • Locking force Fmax
    6500 N
  • Approach speed
    max.20 m/min
  • Connection
    1 plug connector M12, 8-pin
  • Installation orientation
    Any (Preferably head downward)
  • Ready delay
    1 s
  • Switching frequency
    max.0,5 Hz
  • Mechanical life
    1 x 10⁶
  • Ambient temperature
    -20 ... 55 °C
  • Degree of freedom Z
    ±4 mm
  • Degree of freedom Y
    ±5 mm
  • Housing material
    Stainless steel
  • Degree of protection
    IP67 (Screwed tight plug connector/mating component)
  • Degree of freedom X
    ±5 mm
  • Weight
    1 kg
  • Shock and vibration resistance
    In acc. with EN 60947-5-3

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 122409 on MQ Automation is $749.72. Order now.


About the product

Safety switch with guard locking and integrated evaluation electronics;Locking force up to 6500 N;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;With 1 plug connector M12, 8-pin;Multicode;Door monitoring output;Indication of the door position by LED;Monitoring output DIA;Approach direction A (delivery state)


This item can ship in 3-5 days!

Manufacturer warranty

122409 Euchner

$749.72

Your price can be lower.
Log in or Create account to check your discount

Stock:

22

Select Qty:

$749.72

$749.72 each

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 122409 with other products

Weight

Series

Product Class

Mission time

PFHD

Performance Level

Category

For the approval acc. to ...

Repeat accuracy R

Switching delay from stat...

Turn-on time

Risk time according to EN...

Discrepancy time

Off-state current Ir

Output voltage

Type of output

Switching current

Switching load

Safety class

Connecting cable

Degree of contamination (...

Solenoid duty cycle

Connection rating

Fusing

EMC protection requiremen...

Solenoid operating voltag...

Operating voltage DC

Utilization category acc....

Current consumption

Locking force FZh

Guard locking principle

Locking force Fmax

Approach speed

Connection

Installation orientation

Ready delay

Switching frequency

Mechanical life

Ambient temperature

Degree of freedom Z

Degree of freedom Y

Housing material

Degree of protection

Degree of freedom X

Shock and vibration resis...

Additional feature

Rated impulse withstand v...

Rated insulation voltage ...

Test pulses

Test-pulse interval

Actuating force

Extension of risk time ac...

Extraction force

Overtravel

Retention force

B10D

Version

Operating current

Switching element

Detent mechanism

Operating voltage

Selected product

122409
22 in stock
122409
Euchner

122409 Euchner - Non-contact safety switch CET-AP-..., M12

Weight2.80648126 lb

SeriesCET-AP

Product ClassSafety System

Mission time20 y

PFHD3.1 x 10⁻⁹

Performance LevelPL e

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Repeat accuracy R10 %

Switching delay from state changemax.400 ms

Turn-on time400 ms

Risk time according to EN 60947-5-3max.400 ms

Discrepancy timemax.10 ms

Off-state current Irmax.0,25 mA

Output voltage0 ... 1 V DC

Type of output2 semiconductor outputs, p-s...

Switching current1 ... 200 mA

Switching load24V DC, class 2 (For altern...

Safety classIII

Connecting cable30V DC, 2A (For UL requirem...

Degree of contamination (external, according to EN 60947-1)3

Solenoid duty cycle100 %

Connection rating11 W

Fusing0,25 ... 8 A

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Operating voltage DC24 V DC -15% ... 15% Rev...

Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...

Current consumption80 mA

Locking force FZh5000 N (FZH = FMAX/1.3)

Guard locking principleClosed-circuit current princ...

Locking force Fmax6500 N

Approach speedmax.20 m/min

Connection1 plug connector M12, 8-pin

Installation orientationAny (Preferably head downwa...

Ready delay1 s

Switching frequencymax.0,5 Hz

Mechanical life1 x 10⁶

Ambient temperature-20 ... 55 °C

Degree of freedom Z±4 mm

Degree of freedom Y±5 mm

Housing materialStainless steel

Degree of protectionIP67 (Screwed tight plug co...

Degree of freedom X±5 mm

Shock and vibration resistanceIn acc. with EN 60947-5-3

Additional feature-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Test pulses-

Test-pulse interval-

Actuating force-

Extension of risk time according to EN 60947-5-3 per device-

Extraction force-

Overtravel-

Retention force-

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Performance LevelPL e

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Repeat accuracy R10 %

Switching delay from state change-

Turn-on timemax.400 ms

Risk time according to EN 60947-5-3max.260 ms

Discrepancy timemax.10 ms In acc. with EN ...

Off-state current Irmax.0,25 mA

Output voltage0,8xUB ... UB V DC

Type of outputp-switching, short circuit-p...

Switching current1 ... 50 mA

Switching load24V DC, class 2 (Alternativ...

Safety classIII

Connecting cable-

Degree of contamination (external, according to EN 60947-1)3

Solenoid duty cycle100 %

Connection rating6 W

Fusing0,25 ... 8 A

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Operating voltage DC24 V DC -15% ... 15% Rev...

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Current consumption40 mA

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Guard locking principleClosed-circuit current princ...

Locking force Fmax3900 N

Approach speedmax.20 m/min

Connection2 plug connectors M12, 5 and...

Installation orientationAny

Ready delay8 s

Switching frequencymax.0,5 Hz

Mechanical life1 x 10⁶

Ambient temperature-20 ... +55 °C

Degree of freedom Z-

Degree of freedom Y-

Housing materialDie-cast zinc

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Degree of freedom X-

Shock and vibration resistanceIn acc. with EN 60947-5-3

Additional featureEscape release actuated by p...

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.1,0 ms (Applies for a l...

Test-pulse intervalmin.140 ms

Actuating force10 N

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Extraction force20 N

Overtravel5 mm

Retention force20 N

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Performance LevelPL e

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Repeat accuracy R10 %

Switching delay from state change-

Turn-on timemax.400 ms

Risk time according to EN 60947-5-3-

Discrepancy timemax.10 ms In acc. with EN ...

Off-state current Irmax.0,25 mA

Output voltage0 ... 1 V DC

Type of output2 semiconductor outputs, p-s...

Switching current1 ... 150 mA

Switching load24V DC, class 2 (Alternativ...

Safety classIII

Connecting cable-

Degree of contamination (external, according to EN 60947-1)3

Solenoid duty cycle-

Connection rating1 W

Fusing0,25 ... 8 A

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Solenoid operating voltage DC-

Operating voltage DC24 V DC -15% ... 15% Rev...

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Current consumption40 mA

Locking force FZh-

Guard locking principle-

Locking force Fmax-

Approach speedmax.20 m/min

Connection2 plug connectors M12, 5-pin

Installation orientationDoor hinge DIN right

Ready delaymax.1 s

Switching frequencymax.0,5 Hz

Mechanical life1 x 10⁶

Ambient temperature-20 ... +55 °C

Degree of freedom Z-

Degree of freedom Y-

Housing materialFiber glass reinforced therm...

Degree of protectionIP65 (Screwed tight plug co...

Degree of freedom X-

Shock and vibration resistanceIn acc. with EN 60947-5-3

Additional feature-

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.0,3 ms (Applies for a l...

Test-pulse intervalmin.100 ms

Actuating force10 N

Extension of risk time according to EN 60947-5-3 per device-

Extraction force20 N

Overtravel5 mm

Retention force-

B10D0,13 x 10⁶

VersionEmergency stop

Operating current1 ... 100 mA

Switching element2 pos. driven NC

Detent mechanismSnap-in bolt

Operating voltage5 ... 24 V

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

Relevant products

FAQ

What is the price of 122409?
The price of 122409 on MQ Automation is $749.72. Order now.

Out if stock but available for backorder.

122409 Euchner - Non-contact safety switch CET-AP-..., M12

What can I help you find today?

Recommended parts