116502 Euchner Safety Proximity Sensors
Part#:116502
Alt. Part#:CES-I-AP-U-C04-USB-116502
Manufacturer:Euchner
Category:Safety Proximity Sensors
Product Lifecycle:Active
Mar 15, 2025
Product description
116502 Euchner - Non-contact safety switches CES-I-AP-.-C04-…, M12
Product Details
- Weight 0.18959732 lb
- Series CES-AP
- Product Class Safety System
- Switching hysteresis min.1 mm
- Assured operating distance Sao min.16 mm
- Assured release distance Sar max.77 mm
- Performance Level PL e
- Operating distance 26 mm
- PFHD 4.1 x 10⁻⁹
- For the approval acc. to UL the following applies Operation only with UL class 2 power supply, or equivalent measures
- Mission time 20
- Additional feature Rubber support included
- Category 4
- Repeat accuracy R ≤ 10
- Discrepancy time max.10 ms
- Off-state current Ir max.0,25 mA
- Rated conditional short-circuit current 100 A
- Utilization category acc. to EN 60947-5-2 24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
- Output voltage 0,8 x UB ... UB V DC
- Test-pulse interval min.100 ms
- Switching current max.50 mA
- Test pulses max.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
- Type of output p-switching, short circuit-proof
- Risk time according to EN 60947-5-3 max.260 ms
- Safety class III
- Turn-on time max.300 ms
- Degree of contamination (external, according to EN 60947-1) 3
- Rated impulse withstand voltage Uimp 1,5 kV
- Fusing 0,25 ... 8 A
- EMC protection requirements In acc. with EN IEC 60947-5-3
- Rated insulation voltage Ui 300 V
- Current consumption max.35 mA
- Switching frequency max.1 Hz
- Connection PUR cable 200mm with plug connector M12x1, 5-pin
- Mounting distance min.80 mm
- Operating voltage DC 24 V DC 15% ... 15% Regulated, residual ripple < 5%, PELV (The device tolerates voltage interruptions in the operating voltage, e.g. test pulses, of up to 5 ms. These voltage interruptions are also output on the outputs.)
- Tightening torque max.0,8 Nm
- Installation orientation Any
- Mounting method Surface mounting on metal
- Ready delay 0,5 s
- Degree of protection IP67
- Static bending radius 5 x cable diameter
- Cable ambient temperature (dynamic) -25 ... 65 °C
- Cable ambient temperature (static) -25 ... 65 °C
- Housing material Plastic, PBT
- Dynamic bending radius 10 x cable diameter
- Material NBR 80 ±5 Shore
- Shock and vibration resistance In acc. with EN 60947-5-3
- Weight 0,05 kg
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 116502 on MQ Automation is $238.17. Order now.
About the product
Safety switch with integrated evaluation electronics;No series connection;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;Three active faces;Connecting cable PUR, 0.22 m, plug connector M12, 5-core;Unicode;Monitoring output OD
This item can ship in 3-5 days!
Manufacturer warranty
116502 Euchner
$238.17
Your price can be lower.
Log in or Create account to check your discount
Stock:
Select Qty:
$238.17
$238.17 each
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 116502 with other products
Weight
Series
Product Class
Switching hysteresis
Assured operating distanc...
Assured release distance ...
Performance Level
Operating distance
PFHD
For the approval acc. to ...
Mission time
Additional feature
Category
Repeat accuracy R
Discrepancy time
Off-state current Ir
Rated conditional short-c...
Utilization category acc....
Output voltage
Test-pulse interval
Switching current
Test pulses
Type of output
Risk time according to EN...
Safety class
Turn-on time
Degree of contamination (...
Rated impulse withstand v...
Fusing
EMC protection requiremen...
Rated insulation voltage ...
Current consumption
Switching frequency
Connection
Mounting distance
Operating voltage DC
Tightening torque
Installation orientation
Mounting method
Ready delay
Degree of protection
Static bending radius
Cable ambient temperature...
Cable ambient temperature...
Housing material
Dynamic bending radius
Material
Shock and vibration resis...
Extension of risk time ac...
Selected product
Weight0.18959732 lb
SeriesCES-AP
Product ClassSafety System
Switching hysteresismin.1 mm
Assured operating distance Saomin.16 mm
Assured release distance Sarmax.77 mm
Performance LevelPL e
Operating distance26 mm
PFHD4.1 x 10⁻⁹
For the approval acc. to UL the following appliesOperation only with UL class...
Mission time20
Additional featureRubber support included
Category4
Repeat accuracy R≤ 10
Discrepancy timemax.10 ms
Off-state current Irmax.0,25 mA
Rated conditional short-circuit current100 A
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Output voltage0,8 x UB ... UB V DC
Test-pulse intervalmin.100 ms
Switching currentmax.50 mA
Test pulsesmax.0,3 ms (Applies for a l...
Type of outputp-switching, short circuit-p...
Risk time according to EN 60947-5-3max.260 ms
Safety classIII
Turn-on timemax.300 ms
Degree of contamination (external, according to EN 60947-1)3
Rated impulse withstand voltage Uimp1,5 kV
Fusing0,25 ... 8 A
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Rated insulation voltage Ui300 V
Current consumptionmax.35 mA
Switching frequencymax.1 Hz
ConnectionPUR cable 200mm with plug co...
Mounting distancemin.80 mm
Operating voltage DC24 V DC 15% ... 15% Regu...
Tightening torquemax.0,8 Nm
Installation orientationAny
Mounting methodSurface mounting on metal
Ready delay0,5 s
Degree of protectionIP67
Static bending radius5 x cable diameter
Cable ambient temperature (dynamic)-25 ... 65 °C
Cable ambient temperature (static)-25 ... 65 °C
Housing materialPlastic, PBT
Dynamic bending radius10 x cable diameter
MaterialNBR 80 ±5 Shore
Shock and vibration resistanceIn acc. with EN 60947-5-3
Extension of risk time according to EN 60947-5-3 per device-
Weight0.23589434 lb
SeriesCES-AR
Product ClassSafety System
Switching hysteresismin.1 mm
Assured operating distance Sao6
Assured release distance Sarmax.60 mm
Performance LevelPL e
Operating distance11 mm
PFHD4.1 x 10⁻⁹
For the approval acc. to UL the following appliesOperation only with UL class...
Mission time20
Additional featureRubber support included
Category4
Repeat accuracy R≤ 10
Discrepancy timemax.10 ms
Off-state current Irmax.0,25 mA
Rated conditional short-circuit current100 A
Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...
Output voltage0,8 x UB ... UB V DC
Test-pulse intervalmin.140 ms
Switching currentmax.50 mA
Test pulsesmax.1,0 ms (Applies for a l...
Type of outputSemiconductor output, p-swit...
Risk time according to EN 60947-5-3max.260 ms
Safety classIII
Turn-on timemax.400 ms
Degree of contamination (external, according to EN 60947-1)3
Rated impulse withstand voltage Uimp1,5 kV
Fusing0,25 ... 8 A
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Rated insulation voltage Ui300 V
Current consumptionmax.35 mA (Without taking i...
Switching frequencymax.1 Hz
ConnectionConnection cable PUR, length...
Mounting distancemin.80 mm
Operating voltage DC24 V DC 15% ... 15% Regu...
Tightening torquemax.0,8 Nm
Installation orientationAny
Mounting methodSurface mounting on metal
Ready delay10 s
Degree of protectionIP67
Static bending radius5 x cable diameter
Cable ambient temperature (dynamic)-25 ... 65 °C
Cable ambient temperature (static)-25 ... 65 °C
Housing materialPlastic, PBT
Dynamic bending radius10 x cable diameter
MaterialNBR 80 ±5 Shore
Shock and vibration resistanceIn acc. with EN 60947-5-3
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Weight0.52029032 lb
SeriesCES-AP
Product ClassSafety System
Switching hysteresismin.1 mm
Assured operating distance Saomin.14 mm
Assured release distance Sarmax.60 mm
Performance LevelPL e
Operating distance19 mm
PFHD1.8 x 10⁻⁹
For the approval acc. to UL the following appliesOperation only with UL class...
Mission time20
Additional feature-
Category4
Repeat accuracy R≤ 10
Discrepancy timemax.10 ms
Off-state current Irmax.0,25 mA
Rated conditional short-circuit current100 A
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Output voltage0,8 x UB ... UB V DC
Test-pulse intervalmin.100 ms
Switching currentmax.50 mA
Test pulsesmax.0,3 ms (Applies for a l...
Type of outputp-switching, short circuit-p...
Risk time according to EN 60947-5-3max.260 ms
Safety classIII
Turn-on timemax.300 ms
Degree of contamination (external, according to EN 60947-1)3
Rated impulse withstand voltage Uimp1,5 kV
Fusing0,25 ... 8 A
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Rated insulation voltage Ui75 V
Current consumptionmax.30 mA (Without taking i...
Switching frequencymax.1 Hz
Connectionconnection cable PVC, length...
Mounting distancemin.400 mm
Operating voltage DC24 V DC 15% ... 15% Regu...
Tightening torquemax.1 Nm
Installation orientationAny
Mounting methodSurface mounting on metal
Ready delay0,5 s
Degree of protectionIP67, IP69K
Static bending radius5 x cable diameter
Cable ambient temperature (dynamic)0 ... 65 °C
Cable ambient temperature (static)-40 ... 65 °C
Housing materialPlastic, PBT
Dynamic bending radius10 x cable diameter
Material-
Shock and vibration resistanceIn acc. with EN 60947-5-3
Extension of risk time according to EN 60947-5-3 per device-
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 116502?
The price of 116502 on MQ Automation is $238.17. Order now.
Out if stock but available for backorder.
116502 Euchner - Non-contact safety switches CES-I-AP-.-C04-…, M12
Similar products from: Safety Proximity Sensors
What can I help you find today?
