116505 Euchner Safety Proximity Sensors
Part#:116505
Alt. Part#:CES-I-AP-U-C04-U20-116505
Manufacturer:Euchner
Category:Safety Proximity Sensors
Product Lifecycle:Active
Product description
116505 Euchner - Non-contact safety switches CES-I-AP-.- C04-…, flying lead
Product Details
- Weight 1.55866634 lb
- Series CES-AP
- Product Class Safety System
- Switching hysteresis min.1 mm
- Assured operating distance Sao min.10 mm
- Operating distance 15 mm
- Assured release distance Sar max.60 mm
- Mission time 20
- PFHD 4.1 x 10⁻⁹
- Category 4
- Performance Level PL e
- Additional feature Rubber support included
- For the approval acc. to UL the following applies Operation only with UL class 2 power supply, or equivalent measures
- Repeat accuracy R ≤ 10
- Discrepancy time max.10 ms
- Off-state current Ir max.0,25 mA
- Test-pulse interval min.100 ms
- Utilization category acc. to EN 60947-5-2 24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
- Output voltage 0,8 x UB ... UB V DC
- Rated conditional short-circuit current 100 A
- Test pulses max.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
- Switching current max.50 mA
- Type of output p-switching, short circuit-proof
- Risk time according to EN 60947-5-3 max.260 ms
- Turn-on time max.300 ms
- Degree of contamination (external, according to EN 60947-1) 3
- Safety class III
- Rated impulse withstand voltage Uimp 1,5 kV
- EMC protection requirements In acc. with EN IEC 60947-5-3
- Rated insulation voltage Ui 300 V
- Fusing 0,25 ... 8 A
- Current consumption max.35 mA
- Operating voltage DC 24 V DC 15% ... 15% Regulated, residual ripple < 5%, PELV (The device tolerates voltage interruptions in the operating voltage, e.g. test pulses, of up to 5 ms. These voltage interruptions are also output on the outputs.)
- Ready delay 0,5 s
- Connection connection cable PUR, length 20m
- Switching frequency max.1 Hz
- Tightening torque max.0,8 Nm
- Installation orientation Any
- Mounting distance min.80 mm
- Degree of protection IP67
- Weight 0,7 kg
- Mounting method Surface mounting on metal
- Material NBR 80 ±5 Shore
- Housing material Plastic, PBT
- Dynamic bending radius 10 x cable diameter
- Cable ambient temperature (dynamic) -25 ... 65 °C
- Static bending radius 5 x cable diameter
- Cable ambient temperature (static) -25 ... 65 °C
- Shock and vibration resistance In acc. with EN 60947-5-3
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 116505 on MQ Automation is $327.05. Order now.
About the product
Safety switch with integrated evaluation electronics;No series connection;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;Three active faces;Connecting cable PUR, 20 m, flying lead;Unicode;Monitoring output OD
Manufacturer warranty
116505 Euchner
$327.05
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$327.05
$327.05 each
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 116505 with other products
Weight
Series
Product Class
Switching hysteresis
Assured operating distanc...
Operating distance
Assured release distance ...
Mission time
PFHD
Category
Performance Level
Additional feature
For the approval acc. to ...
Repeat accuracy R
Discrepancy time
Off-state current Ir
Test-pulse interval
Utilization category acc....
Output voltage
Rated conditional short-c...
Test pulses
Switching current
Type of output
Risk time according to EN...
Turn-on time
Degree of contamination (...
Safety class
Rated impulse withstand v...
EMC protection requiremen...
Rated insulation voltage ...
Fusing
Current consumption
Operating voltage DC
Ready delay
Connection
Switching frequency
Tightening torque
Installation orientation
Mounting distance
Degree of protection
Mounting method
Material
Housing material
Dynamic bending radius
Cable ambient temperature...
Static bending radius
Cable ambient temperature...
Shock and vibration resis...
Extension of risk time ac...
Selected product
Weight1.55866634 lb
SeriesCES-AP
Product ClassSafety System
Switching hysteresismin.1 mm
Assured operating distance Saomin.10 mm
Operating distance15 mm
Assured release distance Sarmax.60 mm
Mission time20
PFHD4.1 x 10⁻⁹
Category4
Performance LevelPL e
Additional featureRubber support included
For the approval acc. to UL the following appliesOperation only with UL class...
Repeat accuracy R≤ 10
Discrepancy timemax.10 ms
Off-state current Irmax.0,25 mA
Test-pulse intervalmin.100 ms
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Output voltage0,8 x UB ... UB V DC
Rated conditional short-circuit current100 A
Test pulsesmax.0,3 ms (Applies for a l...
Switching currentmax.50 mA
Type of outputp-switching, short circuit-p...
Risk time according to EN 60947-5-3max.260 ms
Turn-on timemax.300 ms
Degree of contamination (external, according to EN 60947-1)3
Safety classIII
Rated impulse withstand voltage Uimp1,5 kV
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Rated insulation voltage Ui300 V
Fusing0,25 ... 8 A
Current consumptionmax.35 mA
Operating voltage DC24 V DC 15% ... 15% Regu...
Ready delay0,5 s
Connectionconnection cable PUR, length...
Switching frequencymax.1 Hz
Tightening torquemax.0,8 Nm
Installation orientationAny
Mounting distancemin.80 mm
Degree of protectionIP67
Mounting methodSurface mounting on metal
MaterialNBR 80 ±5 Shore
Housing materialPlastic, PBT
Dynamic bending radius10 x cable diameter
Cable ambient temperature (dynamic)-25 ... 65 °C
Static bending radius5 x cable diameter
Cable ambient temperature (static)-25 ... 65 °C
Shock and vibration resistanceIn acc. with EN 60947-5-3
Extension of risk time according to EN 60947-5-3 per device-
Weight0.23589434 lb
SeriesCES-AR
Product ClassSafety System
Switching hysteresismin.1 mm
Assured operating distance Sao6
Operating distance11 mm
Assured release distance Sarmax.60 mm
Mission time20
PFHD4.1 x 10⁻⁹
Category4
Performance LevelPL e
Additional featureRubber support included
For the approval acc. to UL the following appliesOperation only with UL class...
Repeat accuracy R≤ 10
Discrepancy timemax.10 ms
Off-state current Irmax.0,25 mA
Test-pulse intervalmin.140 ms
Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...
Output voltage0,8 x UB ... UB V DC
Rated conditional short-circuit current100 A
Test pulsesmax.1,0 ms (Applies for a l...
Switching currentmax.50 mA
Type of outputSemiconductor output, p-swit...
Risk time according to EN 60947-5-3max.260 ms
Turn-on timemax.400 ms
Degree of contamination (external, according to EN 60947-1)3
Safety classIII
Rated impulse withstand voltage Uimp1,5 kV
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Rated insulation voltage Ui300 V
Fusing0,25 ... 8 A
Current consumptionmax.35 mA (Without taking i...
Operating voltage DC24 V DC 15% ... 15% Regu...
Ready delay10 s
ConnectionConnection cable PUR, length...
Switching frequencymax.1 Hz
Tightening torquemax.0,8 Nm
Installation orientationAny
Mounting distancemin.80 mm
Degree of protectionIP67
Mounting methodSurface mounting on metal
MaterialNBR 80 ±5 Shore
Housing materialPlastic, PBT
Dynamic bending radius10 x cable diameter
Cable ambient temperature (dynamic)-25 ... 65 °C
Static bending radius5 x cable diameter
Cable ambient temperature (static)-25 ... 65 °C
Shock and vibration resistanceIn acc. with EN 60947-5-3
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Weight0.52029032 lb
SeriesCES-AP
Product ClassSafety System
Switching hysteresismin.1 mm
Assured operating distance Saomin.14 mm
Operating distance19 mm
Assured release distance Sarmax.60 mm
Mission time20
PFHD1.8 x 10⁻⁹
Category4
Performance LevelPL e
Additional feature-
For the approval acc. to UL the following appliesOperation only with UL class...
Repeat accuracy R≤ 10
Discrepancy timemax.10 ms
Off-state current Irmax.0,25 mA
Test-pulse intervalmin.100 ms
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Output voltage0,8 x UB ... UB V DC
Rated conditional short-circuit current100 A
Test pulsesmax.0,3 ms (Applies for a l...
Switching currentmax.50 mA
Type of outputp-switching, short circuit-p...
Risk time according to EN 60947-5-3max.260 ms
Turn-on timemax.300 ms
Degree of contamination (external, according to EN 60947-1)3
Safety classIII
Rated impulse withstand voltage Uimp1,5 kV
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Rated insulation voltage Ui75 V
Fusing0,25 ... 8 A
Current consumptionmax.30 mA (Without taking i...
Operating voltage DC24 V DC 15% ... 15% Regu...
Ready delay0,5 s
Connectionconnection cable PVC, length...
Switching frequencymax.1 Hz
Tightening torquemax.1 Nm
Installation orientationAny
Mounting distancemin.400 mm
Degree of protectionIP67, IP69K
Mounting methodSurface mounting on metal
Material-
Housing materialPlastic, PBT
Dynamic bending radius10 x cable diameter
Cable ambient temperature (dynamic)0 ... 65 °C
Static bending radius5 x cable diameter
Cable ambient temperature (static)-40 ... 65 °C
Shock and vibration resistanceIn acc. with EN 60947-5-3
Extension of risk time according to EN 60947-5-3 per device-
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 116505?
The price of 116505 on MQ Automation is $327.05. Order now.
Out if stock but available for backorder.
116505 Euchner - Non-contact safety switches CES-I-AP-.- C04-…, flying lead
Similar products from: Safety Proximity Sensors
What can I help you find today?
