114090 Euchner Safety Proximity Sensors

114090 on MQ Automation
Euchner
  • 114090
  • 114090
  • 114090

Part#:114090

Alt. Part#:CET3-AR-CDA-CH-50X-SG-114090

Manufacturer:Euchner

Category:Safety Proximity Sensors

Product Lifecycle:Active

Only 1 left in stock. Order Now!

Mar 15, 2025

Product description

114090 Euchner - Non-contact safety switch CET-AR-..., M12, with double ramp

Product Details

  • Weight
    2.65877172 lb
  • Series
    CET-AR
  • Product Class
    Safety System
  • Performance Level
    PL e
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures see operating instructions
  • Category
    4
  • Mission time
    20 y
  • PFHD
    3.1 x 10⁻⁹
  • Switching delay from state change
    max.400 ms
  • Repeat accuracy R
    10 %
  • Discrepancy time
    max.10 ms
  • Type of output
    2 semiconductor outputs, p-switching, short circuit-proof
  • Turn-on time
    400 ms
  • Risk time according to EN 60947-5-3
    max.400 ms
  • Output voltage
    0 ... 1 V DC
  • Off-state current Ir
    max.0,25 mA
  • Switching current
    1 ... 200 mA
  • Extension of risk time according to EN 60947-5-3 per device
    max.5 ms
  • Safety class
    III
  • Connecting cable
    30V DC, 2A (For UL requirement UL category code (CYJV/CYJV7))
  • Switching load
    24V DC, class 2 (For alternatives see operating instructions)
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Solenoid duty cycle
    100 %
  • Connection rating
    11 W
  • Fusing
    0,5 ... 8 A
  • Solenoid operating voltage DC
    24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Ready delay
    10 s
  • Operating voltage DC
    24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Utilization category acc. to EN 60947-5-2
    24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
  • Current consumption
    80 mA
  • Locking force FZh
    5000 N
  • Locking force Fmax
    6500 N
  • Guard locking principle
    Closed-circuit current principle
  • Approach speed
    max.20 m/min
  • Connection
    2 plug connectors M12, 5 and 8-pin
  • Switching frequency
    max.0,5 Hz
  • Installation orientation
    Any (Preferably head downward)
  • Shock and vibration resistance
    In acc. with EN 60947-5-3
  • Degree of freedom Z
    ±4 mm
  • Weight
    1 kg
  • Housing material
    Stainless steel
  • Degree of freedom Y
    ±5 mm
  • Ambient temperature
    -20 ... 55 °C
  • Mechanical life
    1 x 10⁶
  • Degree of freedom X
    ±5 mm
  • Degree of protection
    IP67 (Screwed tight plug connector/mating component)

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 114090 on MQ Automation is $899.66. Order now.


About the product

Safety switch with guard locking and integrated evaluation electronics;Locking force up to 6500 N;Up to 20 switches in series;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;With 2 plug connectors M12;Multicode;Door monitoring output;Indication of the door position by LED;With double ramp;Approach directions A and C (delivery state)


This item can ship in 3-5 days!

Manufacturer warranty

114090 Euchner

$899.66

Your price can be lower.
Log in or Create account to check your discount

Stock:

1

Select Qty:

$899.66

$899.66 each

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 114090 with other products

Weight

Series

Product Class

Performance Level

For the approval acc. to ...

Category

Mission time

PFHD

Switching delay from stat...

Repeat accuracy R

Discrepancy time

Type of output

Turn-on time

Risk time according to EN...

Output voltage

Off-state current Ir

Switching current

Extension of risk time ac...

Safety class

Connecting cable

Switching load

EMC protection requiremen...

Degree of contamination (...

Solenoid duty cycle

Connection rating

Fusing

Solenoid operating voltag...

Ready delay

Operating voltage DC

Utilization category acc....

Current consumption

Locking force FZh

Locking force Fmax

Guard locking principle

Approach speed

Connection

Switching frequency

Installation orientation

Shock and vibration resis...

Degree of freedom Z

Housing material

Degree of freedom Y

Ambient temperature

Mechanical life

Degree of freedom X

Degree of protection

Additional feature

Rated impulse withstand v...

Rated insulation voltage ...

Test pulses

Test-pulse interval

Actuating force

Extraction force

Overtravel

Retention force

B10D

Version

Operating current

Switching element

Detent mechanism

Operating voltage

Selected product

114090
1 in stock
114090
Euchner

114090 Euchner - Non-contact safety switch CET-AR-..., M12, with double ramp

Weight2.65877172 lb

SeriesCET-AR

Product ClassSafety System

Performance LevelPL e

For the approval acc. to UL the following appliesOperation only with UL class...

Category4

Mission time20 y

PFHD3.1 x 10⁻⁹

Switching delay from state changemax.400 ms

Repeat accuracy R10 %

Discrepancy timemax.10 ms

Type of output2 semiconductor outputs, p-s...

Turn-on time400 ms

Risk time according to EN 60947-5-3max.400 ms

Output voltage0 ... 1 V DC

Off-state current Irmax.0,25 mA

Switching current1 ... 200 mA

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Safety classIII

Connecting cable30V DC, 2A (For UL requirem...

Switching load24V DC, class 2 (For altern...

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Degree of contamination (external, according to EN 60947-1)3

Solenoid duty cycle100 %

Connection rating11 W

Fusing0,5 ... 8 A

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Ready delay10 s

Operating voltage DC24 V DC -15% ... 15% Rev...

Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...

Current consumption80 mA

Locking force FZh5000 N

Locking force Fmax6500 N

Guard locking principleClosed-circuit current princ...

Approach speedmax.20 m/min

Connection2 plug connectors M12, 5 and...

Switching frequencymax.0,5 Hz

Installation orientationAny (Preferably head downwa...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of freedom Z±4 mm

Housing materialStainless steel

Degree of freedom Y±5 mm

Ambient temperature-20 ... 55 °C

Mechanical life1 x 10⁶

Degree of freedom X±5 mm

Degree of protectionIP67 (Screwed tight plug co...

Additional feature-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Test pulses-

Test-pulse interval-

Actuating force-

Extraction force-

Overtravel-

Retention force-

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

Performance LevelPL e

For the approval acc. to UL the following appliesOperation only with UL class...

Category4

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Switching delay from state change-

Repeat accuracy R10 %

Discrepancy timemax.10 ms In acc. with EN ...

Type of outputp-switching, short circuit-p...

Turn-on timemax.400 ms

Risk time according to EN 60947-5-3max.260 ms

Output voltage0,8xUB ... UB V DC

Off-state current Irmax.0,25 mA

Switching current1 ... 50 mA

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Safety classIII

Connecting cable-

Switching load24V DC, class 2 (Alternativ...

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Degree of contamination (external, according to EN 60947-1)3

Solenoid duty cycle100 %

Connection rating6 W

Fusing0,25 ... 8 A

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Ready delay8 s

Operating voltage DC24 V DC -15% ... 15% Rev...

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Current consumption40 mA

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Locking force Fmax3900 N

Guard locking principleClosed-circuit current princ...

Approach speedmax.20 m/min

Connection2 plug connectors M12, 5 and...

Switching frequencymax.0,5 Hz

Installation orientationAny

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of freedom Z-

Housing materialDie-cast zinc

Degree of freedom Y-

Ambient temperature-20 ... +55 °C

Mechanical life1 x 10⁶

Degree of freedom X-

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Additional featureEscape release actuated by p...

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.1,0 ms (Applies for a l...

Test-pulse intervalmin.140 ms

Actuating force10 N

Extraction force20 N

Overtravel5 mm

Retention force20 N

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

Performance LevelPL e

For the approval acc. to UL the following appliesOperation only with UL class...

Category4

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Switching delay from state change-

Repeat accuracy R10 %

Discrepancy timemax.10 ms In acc. with EN ...

Type of output2 semiconductor outputs, p-s...

Turn-on timemax.400 ms

Risk time according to EN 60947-5-3-

Output voltage0 ... 1 V DC

Off-state current Irmax.0,25 mA

Switching current1 ... 150 mA

Extension of risk time according to EN 60947-5-3 per device-

Safety classIII

Connecting cable-

Switching load24V DC, class 2 (Alternativ...

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Degree of contamination (external, according to EN 60947-1)3

Solenoid duty cycle-

Connection rating1 W

Fusing0,25 ... 8 A

Solenoid operating voltage DC-

Ready delaymax.1 s

Operating voltage DC24 V DC -15% ... 15% Rev...

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Current consumption40 mA

Locking force FZh-

Locking force Fmax-

Guard locking principle-

Approach speedmax.20 m/min

Connection2 plug connectors M12, 5-pin

Switching frequencymax.0,5 Hz

Installation orientationDoor hinge DIN right

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of freedom Z-

Housing materialFiber glass reinforced therm...

Degree of freedom Y-

Ambient temperature-20 ... +55 °C

Mechanical life1 x 10⁶

Degree of freedom X-

Degree of protectionIP65 (Screwed tight plug co...

Additional feature-

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.0,3 ms (Applies for a l...

Test-pulse intervalmin.100 ms

Actuating force10 N

Extraction force20 N

Overtravel5 mm

Retention force-

B10D0,13 x 10⁶

VersionEmergency stop

Operating current1 ... 100 mA

Switching element2 pos. driven NC

Detent mechanismSnap-in bolt

Operating voltage5 ... 24 V

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

Relevant products

FAQ

What is the price of 114090?
The price of 114090 on MQ Automation is $899.66. Order now.

Out if stock but available for backorder.

114090 Euchner - Non-contact safety switch CET-AR-..., M12, with double ramp

What can I help you find today?

Recommended parts