114073 Euchner Safety Proximity Sensors

114073 on MQ Automation
Euchner
  • 114073
  • 114073
  • 114073

Part#:114073

Alt. Part#:CET3-AP-CRA-AH-50F-SI-114073

Manufacturer:Euchner

Category:Safety Proximity Sensors

Product Lifecycle:Active

8 in stock

Mar 15, 2025

Product description

114073 Euchner - Non-contact safety switch CET-AP-..., with escape release, for connection to decentralized peripheral systems

Product Details

  • Weight
    2.97403238 lb
  • Series
    CET-AP
  • Product Class
    Safety System
  • Mission time
    20 y
  • PFHD
    3.1 x 10⁻⁹
  • Performance Level
    PL e
  • Category
    4
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures see operating instructions
  • Repeat accuracy R
    10 %
  • Risk time according to EN 60947-5-3
    max.400 ms
  • Discrepancy time
    max.10 ms
  • Turn-on time
    400 ms
  • Output voltage
    0 ... 1 V DC
  • Off-state current Ir
    max.0,25 mA
  • Switching current
    1 ... 200 mA
  • Switching load
    24V DC, class 2 (For alternatives see operating instructions)
  • Type of output
    2 semiconductor outputs, p-switching, short circuit-proof
  • Safety class
    III
  • Connecting cable
    30V DC, 2A (For UL requirement UL category code (CYJV/CYJV7))
  • Solenoid duty cycle
    100 %
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Fusing
    0,5 ... 8 A
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Connection rating
    11 W
  • Solenoid operating voltage DC
    24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Utilization category acc. to EN 60947-5-2
    24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
  • Current consumption
    450 mA
  • Operating voltage DC
    24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Approach speed
    max.20 m/min
  • Locking force FZh
    5000 N
  • Locking force Fmax
    6500 N
  • Connection
    2 plug connectors M12, 5-pin
  • Guard locking principle
    Closed-circuit current principle
  • Installation orientation
    Any (Preferably head downward)
  • Switching frequency
    max.0,5 Hz
  • Ready delay
    1 s
  • Mechanical life
    1 x 10⁶
  • Degree of freedom Z
    ±4 mm
  • Degree of freedom X
    ±5 mm
  • Ambient temperature
    -20 ... 55 °C
  • Weight
    1 kg
  • Housing material
    Die-cast aluminum
  • Degree of freedom Y
    ±5 mm
  • Degree of protection
    IP67 (Screwed tight plug connector/mating component)
  • Shock and vibration resistance
    In acc. with EN 60947-5-3

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 114073 on MQ Automation is $1,061.72. Order now.


About the product

Safety switch with guard locking and integrated evaluation electronics;Locking force up to 6500 N;Direct connection to decentralized peripheral systems (e.g. ET200pro);Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;With 2 plug connectors M12;Unicode;Indication of the door position by LED;Escape release, 75 mm long;Approach direction A (delivery state)


This item can ship in 3-5 days!

Manufacturer warranty

114073 Euchner

$1,061.72

Your price can be lower.
Log in or Create account to check your discount

Stock:

8

Select Qty:

$1,061.72

$1,061.72 each

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 114073 with other products

Weight

Series

Product Class

Mission time

PFHD

Performance Level

Category

For the approval acc. to ...

Repeat accuracy R

Risk time according to EN...

Discrepancy time

Turn-on time

Output voltage

Off-state current Ir

Switching current

Switching load

Type of output

Safety class

Connecting cable

Solenoid duty cycle

Degree of contamination (...

Fusing

EMC protection requiremen...

Connection rating

Solenoid operating voltag...

Utilization category acc....

Current consumption

Operating voltage DC

Approach speed

Locking force FZh

Locking force Fmax

Connection

Guard locking principle

Installation orientation

Switching frequency

Ready delay

Mechanical life

Degree of freedom Z

Degree of freedom X

Ambient temperature

Housing material

Degree of freedom Y

Degree of protection

Shock and vibration resis...

Additional feature

Rated impulse withstand v...

Rated insulation voltage ...

Test pulses

Test-pulse interval

Actuating force

Extension of risk time ac...

Extraction force

Overtravel

Retention force

B10D

Version

Operating current

Switching element

Detent mechanism

Operating voltage

Selected product

114073
8 in stock
114073
Euchner

114073 Euchner - Non-contact safety switch CET-AP-..., with escape release, for connection to decent...

Weight2.97403238 lb

SeriesCET-AP

Product ClassSafety System

Mission time20 y

PFHD3.1 x 10⁻⁹

Performance LevelPL e

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Repeat accuracy R10 %

Risk time according to EN 60947-5-3max.400 ms

Discrepancy timemax.10 ms

Turn-on time400 ms

Output voltage0 ... 1 V DC

Off-state current Irmax.0,25 mA

Switching current1 ... 200 mA

Switching load24V DC, class 2 (For altern...

Type of output2 semiconductor outputs, p-s...

Safety classIII

Connecting cable30V DC, 2A (For UL requirem...

Solenoid duty cycle100 %

Degree of contamination (external, according to EN 60947-1)3

Fusing0,5 ... 8 A

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating11 W

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...

Current consumption450 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Approach speedmax.20 m/min

Locking force FZh5000 N

Locking force Fmax6500 N

Connection2 plug connectors M12, 5-pin

Guard locking principleClosed-circuit current princ...

Installation orientationAny (Preferably head downwa...

Switching frequencymax.0,5 Hz

Ready delay1 s

Mechanical life1 x 10⁶

Degree of freedom Z±4 mm

Degree of freedom X±5 mm

Ambient temperature-20 ... 55 °C

Housing materialDie-cast aluminum

Degree of freedom Y±5 mm

Degree of protectionIP67 (Screwed tight plug co...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Additional feature-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Test pulses-

Test-pulse interval-

Actuating force-

Extension of risk time according to EN 60947-5-3 per device-

Extraction force-

Overtravel-

Retention force-

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Performance LevelPL e

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Repeat accuracy R10 %

Risk time according to EN 60947-5-3max.260 ms

Discrepancy timemax.10 ms In acc. with EN ...

Turn-on timemax.400 ms

Output voltage0,8xUB ... UB V DC

Off-state current Irmax.0,25 mA

Switching current1 ... 50 mA

Switching load24V DC, class 2 (Alternativ...

Type of outputp-switching, short circuit-p...

Safety classIII

Connecting cable-

Solenoid duty cycle100 %

Degree of contamination (external, according to EN 60947-1)3

Fusing0,25 ... 8 A

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating6 W

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Approach speedmax.20 m/min

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Locking force Fmax3900 N

Connection2 plug connectors M12, 5 and...

Guard locking principleClosed-circuit current princ...

Installation orientationAny

Switching frequencymax.0,5 Hz

Ready delay8 s

Mechanical life1 x 10⁶

Degree of freedom Z-

Degree of freedom X-

Ambient temperature-20 ... +55 °C

Housing materialDie-cast zinc

Degree of freedom Y-

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Additional featureEscape release actuated by p...

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.1,0 ms (Applies for a l...

Test-pulse intervalmin.140 ms

Actuating force10 N

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Extraction force20 N

Overtravel5 mm

Retention force20 N

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Performance LevelPL e

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Repeat accuracy R10 %

Risk time according to EN 60947-5-3-

Discrepancy timemax.10 ms In acc. with EN ...

Turn-on timemax.400 ms

Output voltage0 ... 1 V DC

Off-state current Irmax.0,25 mA

Switching current1 ... 150 mA

Switching load24V DC, class 2 (Alternativ...

Type of output2 semiconductor outputs, p-s...

Safety classIII

Connecting cable-

Solenoid duty cycle-

Degree of contamination (external, according to EN 60947-1)3

Fusing0,25 ... 8 A

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating1 W

Solenoid operating voltage DC-

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Approach speedmax.20 m/min

Locking force FZh-

Locking force Fmax-

Connection2 plug connectors M12, 5-pin

Guard locking principle-

Installation orientationDoor hinge DIN right

Switching frequencymax.0,5 Hz

Ready delaymax.1 s

Mechanical life1 x 10⁶

Degree of freedom Z-

Degree of freedom X-

Ambient temperature-20 ... +55 °C

Housing materialFiber glass reinforced therm...

Degree of freedom Y-

Degree of protectionIP65 (Screwed tight plug co...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Additional feature-

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.0,3 ms (Applies for a l...

Test-pulse intervalmin.100 ms

Actuating force10 N

Extension of risk time according to EN 60947-5-3 per device-

Extraction force20 N

Overtravel5 mm

Retention force-

B10D0,13 x 10⁶

VersionEmergency stop

Operating current1 ... 100 mA

Switching element2 pos. driven NC

Detent mechanismSnap-in bolt

Operating voltage5 ... 24 V

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

Relevant products

FAQ

What is the price of 114073?
The price of 114073 on MQ Automation is $1,061.72. Order now.

Out if stock but available for backorder.

114073 Euchner - Non-contact safety switch CET-AP-..., with escape release, for connection to decentralized peripheral systems

What can I help you find today?

Recommended parts