160862 Euchner Safety Switches

160862 on MQ Automation
Euchner
  • 160862
  • 160862
  • 160862

Part#:160862

Alt. Part#:CTP-L1-AR-U-HA-AZS-SAB-160862

Manufacturer:Euchner

Category:Safety Switches

Product Lifecycle:Active

Product description

160862 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, stainless steel

Product Details

  • Weight
    1.322772 lb
  • Series
    CTP-AR
  • Product Class
    Safety System
  • Mission time
    20 y
  • Performance Level
    PL e
  • Category
    4
  • PFHD
    4.1 x 10 ⁻⁹
  • Turn-on time
    max.400 ms
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures see operating instructions
  • Repeat accuracy R
    10 %
  • Discrepancy time
    max.10 ms In acc. with EN IEC 60947-5-3
  • Off-state current Ir
    max.0,25 mA
  • Output voltage
    UB-1,5 ... UB V DC
  • Switching current
    1 ... 150 mA
  • Safety class
    III
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Switching load
    24V DC, class 2 (Alternatively see operating instructions)
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Risk time according to EN 60947-5-3
    max.260 ms
  • Type of output
    2 semiconductor outputs, p-switching, short circuit-proof
  • Solenoid duty cycle
    100 %
  • Connection rating
    6 W
  • Rated insulation voltage Ui
    50 V
  • Rated impulse withstand voltage Uimp
    0,5 kV
  • Fusing
    0,25 ... 8 A
  • Extension of risk time according to EN 60947-5-3 per device
    max.5 ms
  • Solenoid operating voltage DC
    24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Utilization category acc. to EN 60947-5-2
    24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
  • Current consumption
    40 mA
  • Operating voltage DC
    24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Test pulses
    max.1,0 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
  • Test-pulse interval
    min.140 ms
  • Overtravel
    5 mm
  • Retention force
    20 N
  • Actuating force
    10 N
  • Extraction force
    20 N
  • Locking force FZh
    3000 N (Fzh = Fmax/1.3 Depending on the actuator used)
  • Locking force Fmax
    3900 N
  • Guard locking principle
    Closed-circuit current principle
  • Approach speed
    max.20 m/min
  • Connection
    2 plug connectors M12, 5 and 8-pin
  • Shock and vibration resistance
    In acc. with EN 60947-5-3
  • Switching frequency
    max.0,5 Hz
  • Ambient temperature
    -20 ... +55 °C
  • Ready delay
    8 s
  • Mechanical life
    1 x 10⁶
  • Installation orientation
    Any
  • Degree of protection
    IP67/IP69/IP69K (Screwed tight plug connector/mating component)
  • Housing material
    Stainless steel
  • Weight
    0,48 kg

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 160862 on MQ Automation is $894.03. Order now.


About the product

Safety switch with guard locking and integrated evaluation electronics;Version with stainless-steel components;ECOLAB certificate;Up to 20 switches in series;Short circuit monitoring;2 safety outputs (semiconductor outputs);Up to category 4 / PL e according to EN ISO 13849-1;With 2 plug connectors M12;Unicode;Door monitoring output;Approach directions A, B and C (delivery state)


Manufacturer warranty

160862 Euchner

$894.03

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$894.03

$894.03 each

Average response time: 11 minutes

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 160862 with other products

Weight

Series

Product Class

Mission time

Performance Level

Category

PFHD

Turn-on time

For the approval acc. to ...

Repeat accuracy R

Discrepancy time

Off-state current Ir

Output voltage

Switching current

Safety class

Degree of contamination (...

Switching load

EMC protection requiremen...

Risk time according to EN...

Type of output

Solenoid duty cycle

Connection rating

Rated insulation voltage ...

Rated impulse withstand v...

Fusing

Extension of risk time ac...

Solenoid operating voltag...

Utilization category acc....

Current consumption

Operating voltage DC

Test pulses

Test-pulse interval

Overtravel

Retention force

Actuating force

Extraction force

Locking force FZh

Locking force Fmax

Guard locking principle

Approach speed

Connection

Shock and vibration resis...

Switching frequency

Ambient temperature

Ready delay

Mechanical life

Installation orientation

Degree of protection

Housing material

Additional feature

B10D

Version

Operating current

Switching element

Detent mechanism

Operating voltage

Selected product

160862
0 in stock
160862
Euchner

160862 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, stainless steel

Weight1.322772 lb

SeriesCTP-AR

Product ClassSafety System

Mission time20 y

Performance LevelPL e

Category4

PFHD4.1 x 10 ⁻⁹

Turn-on timemax.400 ms

For the approval acc. to UL the following appliesOperation only with UL class...

Repeat accuracy R10 %

Discrepancy timemax.10 ms In acc. with EN ...

Off-state current Irmax.0,25 mA

Output voltageUB-1,5 ... UB V DC

Switching current1 ... 150 mA

Safety classIII

Degree of contamination (external, according to EN 60947-1)3

Switching load24V DC, class 2 (Alternativ...

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Risk time according to EN 60947-5-3max.260 ms

Type of output2 semiconductor outputs, p-s...

Solenoid duty cycle100 %

Connection rating6 W

Rated insulation voltage Ui50 V

Rated impulse withstand voltage Uimp0,5 kV

Fusing0,25 ... 8 A

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Test pulsesmax.1,0 ms (Applies for a l...

Test-pulse intervalmin.140 ms

Overtravel5 mm

Retention force20 N

Actuating force10 N

Extraction force20 N

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Locking force Fmax3900 N

Guard locking principleClosed-circuit current princ...

Approach speedmax.20 m/min

Connection2 plug connectors M12, 5 and...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Switching frequencymax.0,5 Hz

Ambient temperature-20 ... +55 °C

Ready delay8 s

Mechanical life1 x 10⁶

Installation orientationAny

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Housing materialStainless steel

Additional feature-

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

Mission time20 y

Performance LevelPL e

Category4

PFHD4.1 x 10 ⁻⁹

Turn-on timemax.400 ms

For the approval acc. to UL the following appliesOperation only with UL class...

Repeat accuracy R10 %

Discrepancy timemax.10 ms In acc. with EN ...

Off-state current Irmax.0,25 mA

Output voltage0,8xUB ... UB V DC

Switching current1 ... 50 mA

Safety classIII

Degree of contamination (external, according to EN 60947-1)3

Switching load24V DC, class 2 (Alternativ...

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Risk time according to EN 60947-5-3max.260 ms

Type of outputp-switching, short circuit-p...

Solenoid duty cycle100 %

Connection rating6 W

Rated insulation voltage Ui50 V

Rated impulse withstand voltage Uimp0,5 kV

Fusing0,25 ... 8 A

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Test pulsesmax.1,0 ms (Applies for a l...

Test-pulse intervalmin.140 ms

Overtravel5 mm

Retention force20 N

Actuating force10 N

Extraction force20 N

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Locking force Fmax3900 N

Guard locking principleClosed-circuit current princ...

Approach speedmax.20 m/min

Connection2 plug connectors M12, 5 and...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Switching frequencymax.0,5 Hz

Ambient temperature-20 ... +55 °C

Ready delay8 s

Mechanical life1 x 10⁶

Installation orientationAny

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Housing materialDie-cast zinc

Additional featureEscape release actuated by p...

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

Mission time20 y

Performance LevelPL e

Category4

PFHD4.1 x 10 ⁻⁹

Turn-on timemax.400 ms

For the approval acc. to UL the following appliesOperation only with UL class...

Repeat accuracy R10 %

Discrepancy timemax.10 ms In acc. with EN ...

Off-state current Irmax.0,25 mA

Output voltage0 ... 1 V DC

Switching current1 ... 150 mA

Safety classIII

Degree of contamination (external, according to EN 60947-1)3

Switching load24V DC, class 2 (Alternativ...

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Risk time according to EN 60947-5-3-

Type of output2 semiconductor outputs, p-s...

Solenoid duty cycle-

Connection rating1 W

Rated insulation voltage Ui50 V

Rated impulse withstand voltage Uimp0,5 kV

Fusing0,25 ... 8 A

Extension of risk time according to EN 60947-5-3 per device-

Solenoid operating voltage DC-

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Test pulsesmax.0,3 ms (Applies for a l...

Test-pulse intervalmin.100 ms

Overtravel5 mm

Retention force-

Actuating force10 N

Extraction force20 N

Locking force FZh-

Locking force Fmax-

Guard locking principle-

Approach speedmax.20 m/min

Connection2 plug connectors M12, 5-pin

Shock and vibration resistanceIn acc. with EN 60947-5-3

Switching frequencymax.0,5 Hz

Ambient temperature-20 ... +55 °C

Ready delaymax.1 s

Mechanical life1 x 10⁶

Installation orientationDoor hinge DIN right

Degree of protectionIP65 (Screwed tight plug co...

Housing materialFiber glass reinforced therm...

Additional feature-

B10D0,13 x 10⁶

VersionEmergency stop

Operating current1 ... 100 mA

Switching element2 pos. driven NC

Detent mechanismSnap-in bolt

Operating voltage5 ... 24 V

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

Relevant products

FAQ

What is the price of 160862?
The price of 160862 on MQ Automation is $894.03. Order now.

Out if stock but available for backorder.

160862 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, stainless steel

Similar products from: Safety Switches

What can I help you find today?

Recommended parts