160832 Euchner Safety Proximity Sensors
Part#:160832
Alt. Part#:CES-I-AP-M-C04-USI-160832
Manufacturer:Euchner
Category:Safety Proximity Sensors
Product Lifecycle:Active
Mar 15, 2025
Product description
160832 Euchner - Non-contact safety switches CES-I-AP-.-C04-, M12; pin 5 not used
Product Details
- Weight 0.2645544 lb
- Series CES-AP
- Product Class Safety System
- Switching hysteresis min.1 mm
- Assured operating distance Sao min.10 mm
- Mission time 20
- Assured release distance Sar max.63 mm
- Operating distance 30 mm
- PFHD 4.1 x 10⁻⁹
- Performance Level PL e
- For the approval acc. to UL the following applies Operation only with UL class 2 power supply, or equivalent measures
- Category 4
- Additional feature Rubber support included
- Repeat accuracy R ≤ 10
- Discrepancy time max.10 ms
- Off-state current Ir max.0,25 mA
- Output voltage UB-1,5V ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.)
- Utilization category acc. to EN 60947-5-2 24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
- Rated conditional short-circuit current 100 A
- Switching current 1 ... 150 mA
- Type of output Semiconductor outputs, p-switching, short circuit-proof
- Test-pulse interval min.100 ms
- Test pulses max.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
- Risk time according to EN 60947-5-3 max.260 ms
- EMC protection requirements In acc. with EN IEC 60947-5-3
- Safety class III
- Turn-on time max.300 ms
- Degree of contamination (external, according to EN 60947-1) 3
- Rated impulse withstand voltage Uimp 1,5 kV
- Rated insulation voltage Ui 300 V
- Fusing 0,25 ... 8 A
- Current consumption max.35 mA
- Tightening torque max.0,8 Nm
- Connection PUR cable 1500mm with plug connector M12x1, 5-pin, pin 5 not used
- Housing material Plastic, PBT
- Operating voltage DC 24 V DC 15% ... 15% Regulated, residual ripple < 5%, PELV (The device tolerates voltage interruptions in the operating voltage, e.g. test pulses, of up to 5 ms. These voltage interruptions are also output on the outputs.)
- Mounting distance min.80 mm
- Ready delay 0,5 s
- Switching frequency max.1 Hz
- Installation orientation Any
- Mounting method Surface mounting on metal
- Degree of protection IP67
- Weight 0,05 kg
- Shock and vibration resistance In acc. with EN 60947-5-3
- Static bending radius 5 x cable diameter
- Cable ambient temperature (dynamic) -25 ... 65 °C
- Dynamic bending radius 10 x cable diameter
- Cable ambient temperature (static) -25 ... 65 °C
- Material NBR 80 ±5 Shore
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 160832 on MQ Automation is $181.25. Order now.
About the product
Safety switch with integrated evaluation electronics;No series connection;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;Three active faces;Connecting cable PUR, 1.5 m, plug connector M12, 5-pin; pin 5 not used;Multicode
This item can ship in 3-5 days!
Manufacturer warranty
160832 Euchner
$181.25
Your price can be lower.
Log in or Create account to check your discount
Stock:
Select Qty:
$181.25
$181.25 each
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 160832 with other products
Weight
Series
Product Class
Switching hysteresis
Assured operating distanc...
Mission time
Assured release distance ...
Operating distance
PFHD
Performance Level
For the approval acc. to ...
Category
Additional feature
Repeat accuracy R
Discrepancy time
Off-state current Ir
Output voltage
Utilization category acc....
Rated conditional short-c...
Switching current
Type of output
Test-pulse interval
Test pulses
Risk time according to EN...
EMC protection requiremen...
Safety class
Turn-on time
Degree of contamination (...
Rated impulse withstand v...
Rated insulation voltage ...
Fusing
Current consumption
Tightening torque
Connection
Housing material
Operating voltage DC
Mounting distance
Ready delay
Switching frequency
Installation orientation
Mounting method
Degree of protection
Shock and vibration resis...
Static bending radius
Cable ambient temperature...
Dynamic bending radius
Cable ambient temperature...
Material
Extension of risk time ac...
Selected product
160832
Euchner
160832 Euchner - Non-contact safety switches CES-I-AP-.-C04-, M12; pin 5 not used
Weight0.2645544 lb
SeriesCES-AP
Product ClassSafety System
Switching hysteresismin.1 mm
Assured operating distance Saomin.10 mm
Mission time20
Assured release distance Sarmax.63 mm
Operating distance30 mm
PFHD4.1 x 10⁻⁹
Performance LevelPL e
For the approval acc. to UL the following appliesOperation only with UL class...
Category4
Additional featureRubber support included
Repeat accuracy R≤ 10
Discrepancy timemax.10 ms
Off-state current Irmax.0,25 mA
Output voltageUB-1,5V ... UB V DC (Values...
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Rated conditional short-circuit current100 A
Switching current1 ... 150 mA
Type of outputSemiconductor outputs, p-swi...
Test-pulse intervalmin.100 ms
Test pulsesmax.0,3 ms (Applies for a l...
Risk time according to EN 60947-5-3max.260 ms
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Safety classIII
Turn-on timemax.300 ms
Degree of contamination (external, according to EN 60947-1)3
Rated impulse withstand voltage Uimp1,5 kV
Rated insulation voltage Ui300 V
Fusing0,25 ... 8 A
Current consumptionmax.35 mA
Tightening torquemax.0,8 Nm
ConnectionPUR cable 1500mm with plug c...
Housing materialPlastic, PBT
Operating voltage DC24 V DC 15% ... 15% Regu...
Mounting distancemin.80 mm
Ready delay0,5 s
Switching frequencymax.1 Hz
Installation orientationAny
Mounting methodSurface mounting on metal
Degree of protectionIP67
Shock and vibration resistanceIn acc. with EN 60947-5-3
Static bending radius5 x cable diameter
Cable ambient temperature (dynamic)-25 ... 65 °C
Dynamic bending radius10 x cable diameter
Cable ambient temperature (static)-25 ... 65 °C
MaterialNBR 80 ±5 Shore
Extension of risk time according to EN 60947-5-3 per device-
Weight0.23589434 lb
SeriesCES-AR
Product ClassSafety System
Switching hysteresismin.1 mm
Assured operating distance Sao6
Mission time20
Assured release distance Sarmax.60 mm
Operating distance11 mm
PFHD4.1 x 10⁻⁹
Performance LevelPL e
For the approval acc. to UL the following appliesOperation only with UL class...
Category4
Additional featureRubber support included
Repeat accuracy R≤ 10
Discrepancy timemax.10 ms
Off-state current Irmax.0,25 mA
Output voltage0,8 x UB ... UB V DC
Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...
Rated conditional short-circuit current100 A
Switching currentmax.50 mA
Type of outputSemiconductor output, p-swit...
Test-pulse intervalmin.140 ms
Test pulsesmax.1,0 ms (Applies for a l...
Risk time according to EN 60947-5-3max.260 ms
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Safety classIII
Turn-on timemax.400 ms
Degree of contamination (external, according to EN 60947-1)3
Rated impulse withstand voltage Uimp1,5 kV
Rated insulation voltage Ui300 V
Fusing0,25 ... 8 A
Current consumptionmax.35 mA (Without taking i...
Tightening torquemax.0,8 Nm
ConnectionConnection cable PUR, length...
Housing materialPlastic, PBT
Operating voltage DC24 V DC 15% ... 15% Regu...
Mounting distancemin.80 mm
Ready delay10 s
Switching frequencymax.1 Hz
Installation orientationAny
Mounting methodSurface mounting on metal
Degree of protectionIP67
Shock and vibration resistanceIn acc. with EN 60947-5-3
Static bending radius5 x cable diameter
Cable ambient temperature (dynamic)-25 ... 65 °C
Dynamic bending radius10 x cable diameter
Cable ambient temperature (static)-25 ... 65 °C
MaterialNBR 80 ±5 Shore
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Weight0.52029032 lb
SeriesCES-AP
Product ClassSafety System
Switching hysteresismin.1 mm
Assured operating distance Saomin.14 mm
Mission time20
Assured release distance Sarmax.60 mm
Operating distance19 mm
PFHD1.8 x 10⁻⁹
Performance LevelPL e
For the approval acc. to UL the following appliesOperation only with UL class...
Category4
Additional feature-
Repeat accuracy R≤ 10
Discrepancy timemax.10 ms
Off-state current Irmax.0,25 mA
Output voltage0,8 x UB ... UB V DC
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Rated conditional short-circuit current100 A
Switching currentmax.50 mA
Type of outputp-switching, short circuit-p...
Test-pulse intervalmin.100 ms
Test pulsesmax.0,3 ms (Applies for a l...
Risk time according to EN 60947-5-3max.260 ms
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Safety classIII
Turn-on timemax.300 ms
Degree of contamination (external, according to EN 60947-1)3
Rated impulse withstand voltage Uimp1,5 kV
Rated insulation voltage Ui75 V
Fusing0,25 ... 8 A
Current consumptionmax.30 mA (Without taking i...
Tightening torquemax.1 Nm
Connectionconnection cable PVC, length...
Housing materialPlastic, PBT
Operating voltage DC24 V DC 15% ... 15% Regu...
Mounting distancemin.400 mm
Ready delay0,5 s
Switching frequencymax.1 Hz
Installation orientationAny
Mounting methodSurface mounting on metal
Degree of protectionIP67, IP69K
Shock and vibration resistanceIn acc. with EN 60947-5-3
Static bending radius5 x cable diameter
Cable ambient temperature (dynamic)0 ... 65 °C
Dynamic bending radius10 x cable diameter
Cable ambient temperature (static)-40 ... 65 °C
Material-
Extension of risk time according to EN 60947-5-3 per device-
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 160832?
The price of 160832 on MQ Automation is $181.25. Order now.
Out if stock but available for backorder.
160832 Euchner - Non-contact safety switches CES-I-AP-.-C04-, M12; pin 5 not used
Similar products from: Safety Proximity Sensors
What can I help you find today?
