157112 Euchner Safety Switches

157112 on MQ Automation
Euchner
  • 157112
  • 157112
  • 157112

Part#:157112

Alt. Part#:CTP-L1-AP-U-HA-AES-SA-157112

Manufacturer:Euchner

Category:Safety Switches

Product Lifecycle:Active

Product description

157112 Euchner - Transponder-coded safety switch CTP-AP, M12, stainless steel, escape release

Product Details

  • Weight
    1.86510852 lb
  • Series
    CTP-AP
  • Product Class
    Safety System
  • Off-state current Ir
    max.0,25 mA
  • Mission time
    20 y
  • Turn-on time
    max.400 ms
  • PFHD
    4.1 x 10 ⁻⁹
  • Discrepancy time
    max.10 ms In acc. with EN IEC 60947-5-3
  • Output voltage
    0 ... 1 V DC
  • Repeat accuracy R
    10 %
  • Type of output
    2 semiconductor outputs, p-switching, short circuit-proof
  • Switching current
    1 ... 150 mA
  • Category
    4
  • Performance Level
    PL e
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures see operating instructions
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Solenoid duty cycle
    100 %
  • Safety class
    III
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Switching load
    24V DC, class 2 (Alternatively see operating instructions)
  • Additional feature
    Escape release actuated by pushing
  • Connection rating
    6 W
  • Rated impulse withstand voltage Uimp
    0,5 kV
  • Rated insulation voltage Ui
    50 V
  • Fusing
    0,25 ... 8 A
  • Solenoid operating voltage DC
    24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Utilization category acc. to EN 60947-5-2
    24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
  • Current consumption
    40 mA
  • Operating voltage DC
    24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Overtravel
    5 mm
  • Test-pulse interval
    min.100 ms
  • Test pulses
    max.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
  • Actuating force
    10 N
  • Retention force
    20 N
  • Locking force FZh
    3000 N (Fzh = Fmax/1.3 Depending on the actuator used)
  • Extraction force
    20 N
  • Guard locking principle
    Closed-circuit current principle
  • Approach speed
    max.20 m/min
  • Locking force Fmax
    3900 N
  • Switching frequency
    max.0,5 Hz
  • Connection
    1 plug connector M12, 8-pin
  • Housing material
    Stainless steel
  • Weight
    0,53 kg
  • Ambient temperature
    -20 ... +55 °C
  • Ready delay
    max.1 s
  • Installation orientation
    Any
  • Shock and vibration resistance
    In acc. with EN 60947-5-3
  • Degree of protection
    IP67/IP69/IP69K (Screwed tight plug connector/mating component)
  • Mechanical life
    1 x 10⁶

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 157112 on MQ Automation is $1,044.84. Order now.


About the product

Safety switch with guard locking and integrated evaluation electronics;Version with stainless-steel components;ECOLAB certificate;Short circuit monitoring;2 safety outputs (semiconductor outputs);Up to category 4 / PL e according to EN ISO 13849-1;With plug connector M12;Unicode;Door monitoring output;With escape release;Approach directions A, B and C (delivery state)


Manufacturer warranty

157112 Euchner

$1,044.84

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$1,044.84

$1,044.84 each

Average response time: 11 minutes

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 157112 with other products

Weight

Series

Product Class

Off-state current Ir

Mission time

Turn-on time

PFHD

Discrepancy time

Output voltage

Repeat accuracy R

Type of output

Switching current

Category

Performance Level

For the approval acc. to ...

Degree of contamination (...

Solenoid duty cycle

Safety class

EMC protection requiremen...

Switching load

Additional feature

Connection rating

Rated impulse withstand v...

Rated insulation voltage ...

Fusing

Solenoid operating voltag...

Utilization category acc....

Current consumption

Operating voltage DC

Overtravel

Test-pulse interval

Test pulses

Actuating force

Retention force

Locking force FZh

Extraction force

Guard locking principle

Approach speed

Locking force Fmax

Switching frequency

Connection

Housing material

Ambient temperature

Ready delay

Installation orientation

Shock and vibration resis...

Degree of protection

Mechanical life

Risk time according to EN...

Extension of risk time ac...

B10D

Version

Operating current

Switching element

Detent mechanism

Operating voltage

Selected product

157112
0 in stock
157112
Euchner

157112 Euchner - Transponder-coded safety switch CTP-AP, M12, stainless steel, escape release

Weight1.86510852 lb

SeriesCTP-AP

Product ClassSafety System

Off-state current Irmax.0,25 mA

Mission time20 y

Turn-on timemax.400 ms

PFHD4.1 x 10 ⁻⁹

Discrepancy timemax.10 ms In acc. with EN ...

Output voltage0 ... 1 V DC

Repeat accuracy R10 %

Type of output2 semiconductor outputs, p-s...

Switching current1 ... 150 mA

Category4

Performance LevelPL e

For the approval acc. to UL the following appliesOperation only with UL class...

Degree of contamination (external, according to EN 60947-1)3

Solenoid duty cycle100 %

Safety classIII

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Switching load24V DC, class 2 (Alternativ...

Additional featureEscape release actuated by p...

Connection rating6 W

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Fusing0,25 ... 8 A

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Overtravel5 mm

Test-pulse intervalmin.100 ms

Test pulsesmax.0,3 ms (Applies for a l...

Actuating force10 N

Retention force20 N

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Extraction force20 N

Guard locking principleClosed-circuit current princ...

Approach speedmax.20 m/min

Locking force Fmax3900 N

Switching frequencymax.0,5 Hz

Connection1 plug connector M12, 8-pin

Housing materialStainless steel

Ambient temperature-20 ... +55 °C

Ready delaymax.1 s

Installation orientationAny

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Mechanical life1 x 10⁶

Risk time according to EN 60947-5-3-

Extension of risk time according to EN 60947-5-3 per device-

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

Off-state current Irmax.0,25 mA

Mission time20 y

Turn-on timemax.400 ms

PFHD4.1 x 10 ⁻⁹

Discrepancy timemax.10 ms In acc. with EN ...

Output voltage0,8xUB ... UB V DC

Repeat accuracy R10 %

Type of outputp-switching, short circuit-p...

Switching current1 ... 50 mA

Category4

Performance LevelPL e

For the approval acc. to UL the following appliesOperation only with UL class...

Degree of contamination (external, according to EN 60947-1)3

Solenoid duty cycle100 %

Safety classIII

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Switching load24V DC, class 2 (Alternativ...

Additional featureEscape release actuated by p...

Connection rating6 W

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Fusing0,25 ... 8 A

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Overtravel5 mm

Test-pulse intervalmin.140 ms

Test pulsesmax.1,0 ms (Applies for a l...

Actuating force10 N

Retention force20 N

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Extraction force20 N

Guard locking principleClosed-circuit current princ...

Approach speedmax.20 m/min

Locking force Fmax3900 N

Switching frequencymax.0,5 Hz

Connection2 plug connectors M12, 5 and...

Housing materialDie-cast zinc

Ambient temperature-20 ... +55 °C

Ready delay8 s

Installation orientationAny

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Mechanical life1 x 10⁶

Risk time according to EN 60947-5-3max.260 ms

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

Off-state current Irmax.0,25 mA

Mission time20 y

Turn-on timemax.400 ms

PFHD4.1 x 10 ⁻⁹

Discrepancy timemax.10 ms In acc. with EN ...

Output voltage0 ... 1 V DC

Repeat accuracy R10 %

Type of output2 semiconductor outputs, p-s...

Switching current1 ... 150 mA

Category4

Performance LevelPL e

For the approval acc. to UL the following appliesOperation only with UL class...

Degree of contamination (external, according to EN 60947-1)3

Solenoid duty cycle-

Safety classIII

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Switching load24V DC, class 2 (Alternativ...

Additional feature-

Connection rating1 W

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Fusing0,25 ... 8 A

Solenoid operating voltage DC-

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Overtravel5 mm

Test-pulse intervalmin.100 ms

Test pulsesmax.0,3 ms (Applies for a l...

Actuating force10 N

Retention force-

Locking force FZh-

Extraction force20 N

Guard locking principle-

Approach speedmax.20 m/min

Locking force Fmax-

Switching frequencymax.0,5 Hz

Connection2 plug connectors M12, 5-pin

Housing materialFiber glass reinforced therm...

Ambient temperature-20 ... +55 °C

Ready delaymax.1 s

Installation orientationDoor hinge DIN right

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of protectionIP65 (Screwed tight plug co...

Mechanical life1 x 10⁶

Risk time according to EN 60947-5-3-

Extension of risk time according to EN 60947-5-3 per device-

B10D0,13 x 10⁶

VersionEmergency stop

Operating current1 ... 100 mA

Switching element2 pos. driven NC

Detent mechanismSnap-in bolt

Operating voltage5 ... 24 V

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

Relevant products

FAQ

What is the price of 157112?
The price of 157112 on MQ Automation is $1,044.84. Order now.

Out if stock but available for backorder.

157112 Euchner - Transponder-coded safety switch CTP-AP, M12, stainless steel, escape release

Similar products from: Safety Switches

What can I help you find today?

Recommended parts