157111 Euchner Safety Switches

157111 on MQ Automation
Euchner
  • 157111
  • 157111
  • 157111

Part#:157111

Alt. Part#:CTP-L1-AP-U-HA-AZS-SA-157111

Manufacturer:Euchner

Category:Safety Switches

Product Lifecycle:Active

Product description

157111 Euchner - Transponder-coded safety switch CTP-AP, M12, stainless steel

Product Details

  • Weight
    1.322772 lb
  • Series
    CTP-AP
  • Product Class
    Safety System
  • Mission time
    20 y
  • PFHD
    4.1 x 10 ⁻⁹
  • Category
    4
  • Performance Level
    PL e
  • Repeat accuracy R
    10 %
  • Discrepancy time
    max.10 ms In acc. with EN IEC 60947-5-3
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures see operating instructions
  • Turn-on time
    max.400 ms
  • Off-state current Ir
    max.0,25 mA
  • Output voltage
    UB-1,5 ... UB V DC
  • Switching current
    1 ... 150 mA
  • Type of output
    2 semiconductor outputs, p-switching, short circuit-proof
  • Safety class
    III
  • Switching load
    24V DC, class 2 (Alternatively see operating instructions)
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Solenoid duty cycle
    100 %
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Rated impulse withstand voltage Uimp
    0,5 kV
  • Connection rating
    6 W
  • Rated insulation voltage Ui
    50 V
  • Fusing
    0,25 ... 8 A
  • Solenoid operating voltage DC
    24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Utilization category acc. to EN 60947-5-2
    24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
  • Operating voltage DC
    24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Current consumption
    400 mA
  • Test pulses
    max.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
  • Actuating force
    10 N
  • Overtravel
    5 mm
  • Test-pulse interval
    min.100 ms
  • Extraction force
    20 N
  • Locking force FZh
    3000 N (Fzh = Fmax/1.3 Depending on the actuator used)
  • Retention force
    20 N
  • Locking force Fmax
    3900 N
  • Approach speed
    max.20 m/min
  • Connection
    1 plug connector M12, 8-pin
  • Guard locking principle
    Closed-circuit current principle
  • Switching frequency
    max.0,5 Hz
  • Ambient temperature
    -20 ... +55 °C
  • Housing material
    Stainless steel
  • Mechanical life
    1 x 10⁶
  • Weight
    0,47 kg
  • Degree of protection
    IP67/IP69/IP69K (Screwed tight plug connector/mating component)
  • Shock and vibration resistance
    In acc. with EN 60947-5-3
  • Installation orientation
    Any
  • Ready delay
    max.1 s

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 157111 on MQ Automation is $790.18. Order now.


About the product

Safety switch with guard locking and integrated evaluation electronics;Version with stainless-steel components;ECOLAB certificate;Short circuit monitoring;2 safety outputs (semiconductor outputs);Up to category 4 / PL e according to EN ISO 13849-1;With plug connector M12;Unicode;Door monitoring output;Approach directions A, B and C (delivery state)


Manufacturer warranty

157111 Euchner

$790.18

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$790.18

$790.18 each

Average response time: 11 minutes

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 157111 with other products

Weight

Series

Product Class

Mission time

PFHD

Category

Performance Level

Repeat accuracy R

Discrepancy time

For the approval acc. to ...

Turn-on time

Off-state current Ir

Output voltage

Switching current

Type of output

Safety class

Switching load

Degree of contamination (...

Solenoid duty cycle

EMC protection requiremen...

Rated impulse withstand v...

Connection rating

Rated insulation voltage ...

Fusing

Solenoid operating voltag...

Utilization category acc....

Operating voltage DC

Current consumption

Test pulses

Actuating force

Overtravel

Test-pulse interval

Extraction force

Locking force FZh

Retention force

Locking force Fmax

Approach speed

Connection

Guard locking principle

Switching frequency

Ambient temperature

Housing material

Mechanical life

Degree of protection

Shock and vibration resis...

Installation orientation

Ready delay

Additional feature

Risk time according to EN...

Extension of risk time ac...

B10D

Version

Operating current

Switching element

Detent mechanism

Operating voltage

Selected product

157111
0 in stock
157111
Euchner

157111 Euchner - Transponder-coded safety switch CTP-AP, M12, stainless steel

Weight1.322772 lb

SeriesCTP-AP

Product ClassSafety System

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Category4

Performance LevelPL e

Repeat accuracy R10 %

Discrepancy timemax.10 ms In acc. with EN ...

For the approval acc. to UL the following appliesOperation only with UL class...

Turn-on timemax.400 ms

Off-state current Irmax.0,25 mA

Output voltageUB-1,5 ... UB V DC

Switching current1 ... 150 mA

Type of output2 semiconductor outputs, p-s...

Safety classIII

Switching load24V DC, class 2 (Alternativ...

Degree of contamination (external, according to EN 60947-1)3

Solenoid duty cycle100 %

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Rated impulse withstand voltage Uimp0,5 kV

Connection rating6 W

Rated insulation voltage Ui50 V

Fusing0,25 ... 8 A

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Operating voltage DC24 V DC -15% ... 15% Rev...

Current consumption400 mA

Test pulsesmax.0,3 ms (Applies for a l...

Actuating force10 N

Overtravel5 mm

Test-pulse intervalmin.100 ms

Extraction force20 N

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Retention force20 N

Locking force Fmax3900 N

Approach speedmax.20 m/min

Connection1 plug connector M12, 8-pin

Guard locking principleClosed-circuit current princ...

Switching frequencymax.0,5 Hz

Ambient temperature-20 ... +55 °C

Housing materialStainless steel

Mechanical life1 x 10⁶

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Installation orientationAny

Ready delaymax.1 s

Additional feature-

Risk time according to EN 60947-5-3-

Extension of risk time according to EN 60947-5-3 per device-

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Category4

Performance LevelPL e

Repeat accuracy R10 %

Discrepancy timemax.10 ms In acc. with EN ...

For the approval acc. to UL the following appliesOperation only with UL class...

Turn-on timemax.400 ms

Off-state current Irmax.0,25 mA

Output voltage0,8xUB ... UB V DC

Switching current1 ... 50 mA

Type of outputp-switching, short circuit-p...

Safety classIII

Switching load24V DC, class 2 (Alternativ...

Degree of contamination (external, according to EN 60947-1)3

Solenoid duty cycle100 %

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Rated impulse withstand voltage Uimp0,5 kV

Connection rating6 W

Rated insulation voltage Ui50 V

Fusing0,25 ... 8 A

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Operating voltage DC24 V DC -15% ... 15% Rev...

Current consumption40 mA

Test pulsesmax.1,0 ms (Applies for a l...

Actuating force10 N

Overtravel5 mm

Test-pulse intervalmin.140 ms

Extraction force20 N

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Retention force20 N

Locking force Fmax3900 N

Approach speedmax.20 m/min

Connection2 plug connectors M12, 5 and...

Guard locking principleClosed-circuit current princ...

Switching frequencymax.0,5 Hz

Ambient temperature-20 ... +55 °C

Housing materialDie-cast zinc

Mechanical life1 x 10⁶

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Installation orientationAny

Ready delay8 s

Additional featureEscape release actuated by p...

Risk time according to EN 60947-5-3max.260 ms

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Category4

Performance LevelPL e

Repeat accuracy R10 %

Discrepancy timemax.10 ms In acc. with EN ...

For the approval acc. to UL the following appliesOperation only with UL class...

Turn-on timemax.400 ms

Off-state current Irmax.0,25 mA

Output voltage0 ... 1 V DC

Switching current1 ... 150 mA

Type of output2 semiconductor outputs, p-s...

Safety classIII

Switching load24V DC, class 2 (Alternativ...

Degree of contamination (external, according to EN 60947-1)3

Solenoid duty cycle-

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Rated impulse withstand voltage Uimp0,5 kV

Connection rating1 W

Rated insulation voltage Ui50 V

Fusing0,25 ... 8 A

Solenoid operating voltage DC-

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Operating voltage DC24 V DC -15% ... 15% Rev...

Current consumption40 mA

Test pulsesmax.0,3 ms (Applies for a l...

Actuating force10 N

Overtravel5 mm

Test-pulse intervalmin.100 ms

Extraction force20 N

Locking force FZh-

Retention force-

Locking force Fmax-

Approach speedmax.20 m/min

Connection2 plug connectors M12, 5-pin

Guard locking principle-

Switching frequencymax.0,5 Hz

Ambient temperature-20 ... +55 °C

Housing materialFiber glass reinforced therm...

Mechanical life1 x 10⁶

Degree of protectionIP65 (Screwed tight plug co...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Installation orientationDoor hinge DIN right

Ready delaymax.1 s

Additional feature-

Risk time according to EN 60947-5-3-

Extension of risk time according to EN 60947-5-3 per device-

B10D0,13 x 10⁶

VersionEmergency stop

Operating current1 ... 100 mA

Switching element2 pos. driven NC

Detent mechanismSnap-in bolt

Operating voltage5 ... 24 V

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

Relevant products

FAQ

What is the price of 157111?
The price of 157111 on MQ Automation is $790.18. Order now.

Out if stock but available for backorder.

157111 Euchner - Transponder-coded safety switch CTP-AP, M12, stainless steel

Similar products from: Safety Switches

What can I help you find today?

Recommended parts