137342 Euchner Safety Switches

137342 on MQ Automation
Euchner
  • 137342
  • 137342
  • 137342

Part#:137342

Alt. Part#:CTP-L1-AP-U-HA-AEE-SH-137342

Manufacturer:Euchner

Category:Safety Switches

Product Lifecycle:Active

Product description

137342 Euchner - Transponder-coded safety switch CTP-AP, M23, 2 pushbuttons (extended), with escape release

Product Details

  • Weight
    1.89156396 lb
  • Series
    CTP-AP
  • Product Class
    Safety System
  • Category
    4
  • Mission time
    20 y
  • PFHD
    4.1 x 10 ⁻⁹
  • Performance Level
    PL e
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures see operating instructions
  • Power supply
    24 V
  • Switching element
    1NO
  • Version
    Illuminated push buttons
  • Additional feature
    Escape release actuated by pushing
  • Repeat accuracy R
    10 %
  • Operating current
    1 ... 50 mA
  • Discrepancy time
    max.10 ms In acc. with EN IEC 60947-5-3
  • Operating voltage
    UB V
  • Off-state current Ir
    max.0,25 mA
  • Switching load
    24V DC, class 2 (Alternatively see operating instructions)
  • Type of output
    2 semiconductor outputs, p-switching, short circuit-proof
  • Switching current
    1 ... 150 mA
  • Turn-on time
    max.400 ms
  • Output voltage
    UB-1,5 ... UB V DC
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Safety class
    III
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Solenoid duty cycle
    100 %
  • Rated impulse withstand voltage Uimp
    0,5 kV
  • Utilization category acc. to EN 60947-5-2
    24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
  • Rated insulation voltage Ui
    50 V
  • Solenoid operating voltage DC
    24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Connection rating
    6 W
  • Fusing
    0,25 ... 8 A
  • Test-pulse interval
    min.100 ms
  • Test pulses
    max.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
  • Current consumption
    40 mA
  • Operating voltage DC
    24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Retention force
    20 N
  • Overtravel
    5 mm
  • Locking force FZh
    3000 N (Fzh = Fmax/1.3 Depending on the actuator used)
  • Actuating force
    10 N
  • Extraction force
    20 N
  • Locking force Fmax
    3900 N
  • Approach speed
    max.20 m/min
  • Guard locking principle
    Closed-circuit current principle
  • Connection
    1 plug connector M23, 19-pin, RC18
  • Switching frequency
    max.0,5 Hz
  • Ready delay
    max.1 s
  • Installation orientation
    Any
  • Mechanical life
    1 x 10⁶
  • Weight
    0,5 kg
  • Ambient temperature
    -20 ... +55 °C
  • Housing material
    Die-cast zinc
  • Degree of protection
    IP65 (Screwed tight plug connector/mating component)
  • Shock and vibration resistance
    In acc. with EN 60947-5-3

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 137342 on MQ Automation is $1,142.86. Order now.


About the product

Safety switch with guard locking and integrated evaluation electronics;Short circuit monitoring;2 safety outputs (semiconductor outputs);Up to category 4 / PL e according to EN ISO 13849-1;2 pushbuttons (illuminated);With plug connector M23;Unicode;Door monitoring output;With escape release;Approach directions A, B and C (delivery state)


Manufacturer warranty

137342 Euchner

$1,142.86

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$1,142.86

$1,142.86 each

Average response time: 11 minutes

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 137342 with other products

Weight

Series

Product Class

Category

Mission time

PFHD

Performance Level

For the approval acc. to ...

Power supply

Switching element

Version

Additional feature

Repeat accuracy R

Operating current

Discrepancy time

Operating voltage

Off-state current Ir

Switching load

Type of output

Switching current

Turn-on time

Output voltage

Degree of contamination (...

Safety class

EMC protection requiremen...

Solenoid duty cycle

Rated impulse withstand v...

Utilization category acc....

Rated insulation voltage ...

Solenoid operating voltag...

Connection rating

Fusing

Test-pulse interval

Test pulses

Current consumption

Operating voltage DC

Retention force

Overtravel

Locking force FZh

Actuating force

Extraction force

Locking force Fmax

Approach speed

Guard locking principle

Connection

Switching frequency

Ready delay

Installation orientation

Mechanical life

Ambient temperature

Housing material

Degree of protection

Shock and vibration resis...

Risk time according to EN...

Extension of risk time ac...

B10D

Detent mechanism

Selected product

137342
0 in stock
137342
Euchner

137342 Euchner - Transponder-coded safety switch CTP-AP, M23, 2 pushbuttons (extended), with escape ...

Weight1.89156396 lb

SeriesCTP-AP

Product ClassSafety System

Category4

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Performance LevelPL e

For the approval acc. to UL the following appliesOperation only with UL class...

Power supply24 V

Switching element1NO

VersionIlluminated push buttons

Additional featureEscape release actuated by p...

Repeat accuracy R10 %

Operating current1 ... 50 mA

Discrepancy timemax.10 ms In acc. with EN ...

Operating voltageUB V

Off-state current Irmax.0,25 mA

Switching load24V DC, class 2 (Alternativ...

Type of output2 semiconductor outputs, p-s...

Switching current1 ... 150 mA

Turn-on timemax.400 ms

Output voltageUB-1,5 ... UB V DC

Degree of contamination (external, according to EN 60947-1)3

Safety classIII

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Solenoid duty cycle100 %

Rated impulse withstand voltage Uimp0,5 kV

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Rated insulation voltage Ui50 V

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Connection rating6 W

Fusing0,25 ... 8 A

Test-pulse intervalmin.100 ms

Test pulsesmax.0,3 ms (Applies for a l...

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Retention force20 N

Overtravel5 mm

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Actuating force10 N

Extraction force20 N

Locking force Fmax3900 N

Approach speedmax.20 m/min

Guard locking principleClosed-circuit current princ...

Connection1 plug connector M23, 19-pin...

Switching frequencymax.0,5 Hz

Ready delaymax.1 s

Installation orientationAny

Mechanical life1 x 10⁶

Ambient temperature-20 ... +55 °C

Housing materialDie-cast zinc

Degree of protectionIP65 (Screwed tight plug co...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Risk time according to EN 60947-5-3-

Extension of risk time according to EN 60947-5-3 per device-

B10D-

Detent mechanism-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

Category4

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Performance LevelPL e

For the approval acc. to UL the following appliesOperation only with UL class...

Power supply-

Switching element-

Version-

Additional featureEscape release actuated by p...

Repeat accuracy R10 %

Operating current-

Discrepancy timemax.10 ms In acc. with EN ...

Operating voltage-

Off-state current Irmax.0,25 mA

Switching load24V DC, class 2 (Alternativ...

Type of outputp-switching, short circuit-p...

Switching current1 ... 50 mA

Turn-on timemax.400 ms

Output voltage0,8xUB ... UB V DC

Degree of contamination (external, according to EN 60947-1)3

Safety classIII

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Solenoid duty cycle100 %

Rated impulse withstand voltage Uimp0,5 kV

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Rated insulation voltage Ui50 V

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Connection rating6 W

Fusing0,25 ... 8 A

Test-pulse intervalmin.140 ms

Test pulsesmax.1,0 ms (Applies for a l...

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Retention force20 N

Overtravel5 mm

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Actuating force10 N

Extraction force20 N

Locking force Fmax3900 N

Approach speedmax.20 m/min

Guard locking principleClosed-circuit current princ...

Connection2 plug connectors M12, 5 and...

Switching frequencymax.0,5 Hz

Ready delay8 s

Installation orientationAny

Mechanical life1 x 10⁶

Ambient temperature-20 ... +55 °C

Housing materialDie-cast zinc

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Risk time according to EN 60947-5-3max.260 ms

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

B10D-

Detent mechanism-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

Category4

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Performance LevelPL e

For the approval acc. to UL the following appliesOperation only with UL class...

Power supply-

Switching element2 pos. driven NC

VersionEmergency stop

Additional feature-

Repeat accuracy R10 %

Operating current1 ... 100 mA

Discrepancy timemax.10 ms In acc. with EN ...

Operating voltage5 ... 24 V

Off-state current Irmax.0,25 mA

Switching load24V DC, class 2 (Alternativ...

Type of output2 semiconductor outputs, p-s...

Switching current1 ... 150 mA

Turn-on timemax.400 ms

Output voltage0 ... 1 V DC

Degree of contamination (external, according to EN 60947-1)3

Safety classIII

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Solenoid duty cycle-

Rated impulse withstand voltage Uimp0,5 kV

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Rated insulation voltage Ui50 V

Solenoid operating voltage DC-

Connection rating1 W

Fusing0,25 ... 8 A

Test-pulse intervalmin.100 ms

Test pulsesmax.0,3 ms (Applies for a l...

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Retention force-

Overtravel5 mm

Locking force FZh-

Actuating force10 N

Extraction force20 N

Locking force Fmax-

Approach speedmax.20 m/min

Guard locking principle-

Connection2 plug connectors M12, 5-pin

Switching frequencymax.0,5 Hz

Ready delaymax.1 s

Installation orientationDoor hinge DIN right

Mechanical life1 x 10⁶

Ambient temperature-20 ... +55 °C

Housing materialFiber glass reinforced therm...

Degree of protectionIP65 (Screwed tight plug co...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Risk time according to EN 60947-5-3-

Extension of risk time according to EN 60947-5-3 per device-

B10D0,13 x 10⁶

Detent mechanismSnap-in bolt

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

Relevant products

FAQ

What is the price of 137342?
The price of 137342 on MQ Automation is $1,142.86. Order now.

Out if stock but available for backorder.

137342 Euchner - Transponder-coded safety switch CTP-AP, M23, 2 pushbuttons (extended), with escape release

Similar products from: Safety Switches

What can I help you find today?

Recommended parts