137341 Euchner Safety Switches

137341 on MQ Automation
Euchner
  • 137341
  • 137341
  • 137341

Part#:137341

Alt. Part#:CTP-L1-AR-U-HA-AZE-SH-137341

Manufacturer:Euchner

Category:Safety Switches

Product Lifecycle:Active

Product description

137341 Euchner - Transponder-coded safety switch CTP-AR, M23, 2 pushbuttons (extended)

Product Details

  • Weight
    1.4550492 lb
  • Series
    CTP-AR
  • Product Class
    Safety System
  • Mission time
    20 y
  • Category
    4
  • PFHD
    4.1 x 10 ⁻⁹
  • Performance Level
    PL e
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures see operating instructions
  • Additional feature
    Incl. cover set ID. No. 120344
  • Switching element
    1NO
  • Version
    Illuminated push buttons
  • Turn-on time
    max.400 ms
  • Repeat accuracy R
    10 %
  • Power supply
    24 V
  • Operating voltage
    UB V
  • Off-state current Ir
    max.0,25 mA
  • Operating current
    1 ... 50 mA
  • Switching current
    1 ... 150 mA
  • Output voltage
    UB-1,5 ... UB V DC
  • Type of output
    2 semiconductor outputs, p-switching, short circuit-proof
  • Switching load
    24V DC, class 2 (Alternatively see operating instructions)
  • Discrepancy time
    max.10 ms In acc. with EN IEC 60947-5-3
  • Risk time according to EN 60947-5-3
    max.260 ms
  • Solenoid duty cycle
    100 %
  • Safety class
    III
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Rated impulse withstand voltage Uimp
    0,5 kV
  • Connection rating
    6 W
  • Rated insulation voltage Ui
    50 V
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Fusing
    0,25 ... 8 A
  • Solenoid operating voltage DC
    24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Current consumption
    40 mA
  • Utilization category acc. to EN 60947-5-2
    24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
  • Operating voltage DC
    24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Test-pulse interval
    min.140 ms
  • Extension of risk time according to EN 60947-5-3 per device
    max.5 ms
  • Actuating force
    10 N
  • Test pulses
    max.1,0 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
  • Overtravel
    5 mm
  • Extraction force
    20 N
  • Retention force
    20 N
  • Locking force FZh
    3000 N (Fzh = Fmax/1.3 Depending on the actuator used)
  • Locking force Fmax
    3900 N
  • Switching frequency
    max.0,5 Hz
  • Approach speed
    max.20 m/min
  • Guard locking principle
    Closed-circuit current principle
  • Degree of protection
    IP65 (Screwed tight plug connector/mating component)
  • Housing material
    Die-cast zinc
  • Connection
    1 plug connector M23, 19-pin, RC18
  • Ambient temperature
    -20 ... +55 °C
  • Shock and vibration resistance
    In acc. with EN 60947-5-3
  • Ready delay
    8 s
  • Weight
    0,5 kg
  • Mechanical life
    1 x 10⁶
  • Installation orientation
    Any

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 137341 on MQ Automation is $992.27. Order now.


About the product

Safety switch with guard locking and integrated evaluation electronics;Up to 20 switches in series;Short circuit monitoring;2 safety outputs (semiconductor outputs);Up to category 4 / PL e according to EN ISO 13849-1;2 pushbuttons (illuminated);With plug connector M23;Unicode;Door monitoring output;Approach directions A, B and C (delivery state)


Manufacturer warranty

137341 Euchner

$992.27

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$992.27

$992.27 each

Average response time: 11 minutes

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 137341 with other products

Weight

Series

Product Class

Mission time

Category

PFHD

Performance Level

For the approval acc. to ...

Additional feature

Switching element

Version

Turn-on time

Repeat accuracy R

Power supply

Operating voltage

Off-state current Ir

Operating current

Switching current

Output voltage

Type of output

Switching load

Discrepancy time

Risk time according to EN...

Solenoid duty cycle

Safety class

Degree of contamination (...

Rated impulse withstand v...

Connection rating

Rated insulation voltage ...

EMC protection requiremen...

Fusing

Solenoid operating voltag...

Current consumption

Utilization category acc....

Operating voltage DC

Test-pulse interval

Extension of risk time ac...

Actuating force

Test pulses

Overtravel

Extraction force

Retention force

Locking force FZh

Locking force Fmax

Switching frequency

Approach speed

Guard locking principle

Degree of protection

Housing material

Connection

Ambient temperature

Shock and vibration resis...

Ready delay

Mechanical life

Installation orientation

B10D

Detent mechanism

Selected product

137341
0 in stock
137341
Euchner

137341 Euchner - Transponder-coded safety switch CTP-AR, M23, 2 pushbuttons (extended)

Weight1.4550492 lb

SeriesCTP-AR

Product ClassSafety System

Mission time20 y

Category4

PFHD4.1 x 10 ⁻⁹

Performance LevelPL e

For the approval acc. to UL the following appliesOperation only with UL class...

Additional featureIncl. cover set ID. No. 1203...

Switching element1NO

VersionIlluminated push buttons

Turn-on timemax.400 ms

Repeat accuracy R10 %

Power supply24 V

Operating voltageUB V

Off-state current Irmax.0,25 mA

Operating current1 ... 50 mA

Switching current1 ... 150 mA

Output voltageUB-1,5 ... UB V DC

Type of output2 semiconductor outputs, p-s...

Switching load24V DC, class 2 (Alternativ...

Discrepancy timemax.10 ms In acc. with EN ...

Risk time according to EN 60947-5-3max.260 ms

Solenoid duty cycle100 %

Safety classIII

Degree of contamination (external, according to EN 60947-1)3

Rated impulse withstand voltage Uimp0,5 kV

Connection rating6 W

Rated insulation voltage Ui50 V

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Fusing0,25 ... 8 A

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Current consumption40 mA

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Operating voltage DC24 V DC -15% ... 15% Rev...

Test-pulse intervalmin.140 ms

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Actuating force10 N

Test pulsesmax.1,0 ms (Applies for a l...

Overtravel5 mm

Extraction force20 N

Retention force20 N

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Locking force Fmax3900 N

Switching frequencymax.0,5 Hz

Approach speedmax.20 m/min

Guard locking principleClosed-circuit current princ...

Degree of protectionIP65 (Screwed tight plug co...

Housing materialDie-cast zinc

Connection1 plug connector M23, 19-pin...

Ambient temperature-20 ... +55 °C

Shock and vibration resistanceIn acc. with EN 60947-5-3

Ready delay8 s

Mechanical life1 x 10⁶

Installation orientationAny

B10D-

Detent mechanism-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

Mission time20 y

Category4

PFHD4.1 x 10 ⁻⁹

Performance LevelPL e

For the approval acc. to UL the following appliesOperation only with UL class...

Additional featureEscape release actuated by p...

Switching element-

Version-

Turn-on timemax.400 ms

Repeat accuracy R10 %

Power supply-

Operating voltage-

Off-state current Irmax.0,25 mA

Operating current-

Switching current1 ... 50 mA

Output voltage0,8xUB ... UB V DC

Type of outputp-switching, short circuit-p...

Switching load24V DC, class 2 (Alternativ...

Discrepancy timemax.10 ms In acc. with EN ...

Risk time according to EN 60947-5-3max.260 ms

Solenoid duty cycle100 %

Safety classIII

Degree of contamination (external, according to EN 60947-1)3

Rated impulse withstand voltage Uimp0,5 kV

Connection rating6 W

Rated insulation voltage Ui50 V

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Fusing0,25 ... 8 A

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Current consumption40 mA

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Operating voltage DC24 V DC -15% ... 15% Rev...

Test-pulse intervalmin.140 ms

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Actuating force10 N

Test pulsesmax.1,0 ms (Applies for a l...

Overtravel5 mm

Extraction force20 N

Retention force20 N

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Locking force Fmax3900 N

Switching frequencymax.0,5 Hz

Approach speedmax.20 m/min

Guard locking principleClosed-circuit current princ...

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Housing materialDie-cast zinc

Connection2 plug connectors M12, 5 and...

Ambient temperature-20 ... +55 °C

Shock and vibration resistanceIn acc. with EN 60947-5-3

Ready delay8 s

Mechanical life1 x 10⁶

Installation orientationAny

B10D-

Detent mechanism-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

Mission time20 y

Category4

PFHD4.1 x 10 ⁻⁹

Performance LevelPL e

For the approval acc. to UL the following appliesOperation only with UL class...

Additional feature-

Switching element2 pos. driven NC

VersionEmergency stop

Turn-on timemax.400 ms

Repeat accuracy R10 %

Power supply-

Operating voltage5 ... 24 V

Off-state current Irmax.0,25 mA

Operating current1 ... 100 mA

Switching current1 ... 150 mA

Output voltage0 ... 1 V DC

Type of output2 semiconductor outputs, p-s...

Switching load24V DC, class 2 (Alternativ...

Discrepancy timemax.10 ms In acc. with EN ...

Risk time according to EN 60947-5-3-

Solenoid duty cycle-

Safety classIII

Degree of contamination (external, according to EN 60947-1)3

Rated impulse withstand voltage Uimp0,5 kV

Connection rating1 W

Rated insulation voltage Ui50 V

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Fusing0,25 ... 8 A

Solenoid operating voltage DC-

Current consumption40 mA

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Operating voltage DC24 V DC -15% ... 15% Rev...

Test-pulse intervalmin.100 ms

Extension of risk time according to EN 60947-5-3 per device-

Actuating force10 N

Test pulsesmax.0,3 ms (Applies for a l...

Overtravel5 mm

Extraction force20 N

Retention force-

Locking force FZh-

Locking force Fmax-

Switching frequencymax.0,5 Hz

Approach speedmax.20 m/min

Guard locking principle-

Degree of protectionIP65 (Screwed tight plug co...

Housing materialFiber glass reinforced therm...

Connection2 plug connectors M12, 5-pin

Ambient temperature-20 ... +55 °C

Shock and vibration resistanceIn acc. with EN 60947-5-3

Ready delaymax.1 s

Mechanical life1 x 10⁶

Installation orientationDoor hinge DIN right

B10D0,13 x 10⁶

Detent mechanismSnap-in bolt

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

Relevant products

FAQ

What is the price of 137341?
The price of 137341 on MQ Automation is $992.27. Order now.

Out if stock but available for backorder.

137341 Euchner - Transponder-coded safety switch CTP-AR, M23, 2 pushbuttons (extended)

Similar products from: Safety Switches

What can I help you find today?

Recommended parts