136390 Euchner Safety Accessories
Part#:136390
Alt. Part#:MGB-L1B-EIA-L-136390
Manufacturer:Euchner
Category:Safety Accessories
Product Lifecycle:Active
Mar 17, 2025
Product description
136390 Euchner - Locking module MGB-L1...-EI (guard locking by spring force) with 4 pushbuttons, emergency stop
Product Details
- Weight 8.81848 lb
- Series MGB-EI
- Product Class Accessories
- Mission time 20
- Safety Integrity Level SIL 3 (EN 62061:2005)
- B10D 0,13 x 10⁶
- PFHD 3.37 x 10⁻⁹ (Fixed failure rate without consideration of faults in wearing parts.)
- Category 4
- Performance Level PL e
- Diagnostic Coverage (DC) 99
- Product version number V1.2
- Additional feature Incl. cover set ID. No. 120344
- Special features With adhesive ring
- Version Emergency stop illuminated
- Assignment diagram B1
- Assured release distance Sar max.65 mm
- Safety class III
- Switching element 2 pos. driven NC
- Safety data protocol CIP Safety
- Fusing min.1 A Slow blow
- Bus data protocol Ethernet/IP
- Operating voltage DC 24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
- Auxiliary voltage DC 24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
- Connecting cable Ethernet/IP cable, Cat. 5e min.
- Transponder coding Unicode
- Degree of contamination (external, according to EN 60947-1) 3
- EMC protection requirements In accordance with EN 61000-4 and EN 61326-3-1
- Locking force FZh 2000 N
- Maximum feed-in current in the connection block max.4000 mA
- Guard locking principle Closed-circuit current principle
- Current consumption max.500 mA
- Rated impulse withstand voltage Uimp 0,5 kV
- Rated insulation voltage Ui 75 V
- Connection M12 Power, A-coded (X1)
- Switching frequency 0,25 Hz
- Installation orientation Door hinge DIN left
- Degree of protection IP54
- Weight 3,1 kg
- Ambient temperature -20 ... 55 °C
- Mechanical life 0,1 x 10⁶
- Shock and vibration resistance In acc. with EN 60947-5-3
- Reaction time max.100 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
- Housing material Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 136390 on MQ Automation is $3,250.29. Order now.
About the product
Guard locking with guard lock monitoring;Emergency stop according to ISO 13850, illuminated;4 illuminated pushbuttons;including adhesive labels;Connection via M12 plug;Pre-assembled on mounting plates;Unicode
This item can ship in 3-5 days!
Manufacturer warranty
136390 Euchner
$3,250.29
Your price can be lower.
Log in or Create account to check your discount
Stock:
Select Qty:
$3,250.29
$3,250.29 each
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 136390 with other products
Weight
Series
Product Class
Mission time
Safety Integrity Level
B10D
PFHD
Category
Performance Level
Diagnostic Coverage (DC)
Product version number
Additional feature
Special features
Version
Assignment diagram
Assured release distance ...
Safety class
Switching element
Safety data protocol
Fusing
Bus data protocol
Operating voltage DC
Auxiliary voltage DC
Connecting cable
Transponder coding
Degree of contamination (...
EMC protection requiremen...
Locking force FZh
Maximum feed-in current i...
Guard locking principle
Current consumption
Rated impulse withstand v...
Rated insulation voltage ...
Connection
Switching frequency
Installation orientation
Degree of protection
Ambient temperature
Mechanical life
Shock and vibration resis...
Reaction time
Housing material
For the approval acc. to ...
Operating current
Repeat accuracy R
Detent mechanism
Discrepancy time
Off-state current Ir
Operating voltage
Switching current
Type of output
Turn-on time
Switching load
Output voltage
Connection rating
Utilization category acc....
Overtravel
Test-pulse interval
Extraction force
Test pulses
Actuating force
Approach speed
Ready delay
Risk time according to EN...
Solenoid duty cycle
Solenoid operating voltag...
Extension of risk time ac...
Locking force Fmax
Retention force
Selected product
136390
Euchner
136390 Euchner - Locking module MGB-L1...-EI (guard locking by spring force) with 4 pushbuttons, eme...
Weight8.81848 lb
SeriesMGB-EI
Product ClassAccessories
Mission time20
Safety Integrity LevelSIL 3 (EN 62061:2005)
B10D0,13 x 10⁶
PFHD3.37 x 10⁻⁹ (Fixed failure ...
Category4
Performance LevelPL e
Diagnostic Coverage (DC)99
Product version numberV1.2
Additional featureIncl. cover set ID. No. 1203...
Special featuresWith adhesive ring
VersionEmergency stop illuminated
Assignment diagramB1
Assured release distance Sarmax.65 mm
Safety classIII
Switching element2 pos. driven NC
Safety data protocolCIP Safety
Fusingmin.1 A Slow blow
Bus data protocolEthernet/IP
Operating voltage DC24 V DC -15% ... 10% ((Re...
Auxiliary voltage DC24 V DC -15% ... +10% (Th...
Connecting cableEthernet/IP cable, Cat. 5e m...
Transponder codingUnicode
Degree of contamination (external, according to EN 60947-1)3
EMC protection requirementsIn accordance with EN 61000-...
Locking force FZh2000 N
Maximum feed-in current in the connection blockmax.4000 mA
Guard locking principleClosed-circuit current princ...
Current consumptionmax.500 mA
Rated impulse withstand voltage Uimp0,5 kV
Rated insulation voltage Ui75 V
ConnectionM12 Power, A-coded (X1)
Switching frequency0,25 Hz
Installation orientationDoor hinge DIN left
Degree of protectionIP54
Ambient temperature-20 ... 55 °C
Mechanical life0,1 x 10⁶
Shock and vibration resistanceIn acc. with EN 60947-5-3
Reaction timemax.100 ms Switch-off time...
Housing materialReinforced plastic, die-cast...
For the approval acc. to UL the following applies-
Operating current-
Repeat accuracy R-
Detent mechanism-
Discrepancy time-
Off-state current Ir-
Operating voltage-
Switching current-
Type of output-
Turn-on time-
Switching load-
Output voltage-
Connection rating-
Utilization category acc. to EN 60947-5-2-
Overtravel-
Test-pulse interval-
Extraction force-
Test pulses-
Actuating force-
Approach speed-
Ready delay-
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
Weight3.968316 lb
SeriesMGBS-P-I-AP
Product ClassSafety System
Mission time20 y
Safety Integrity Level-
B10D0,13 x 10⁶
PFHD4.1 x 10 ⁻⁹
Category4
Performance LevelPL e
Diagnostic Coverage (DC)-
Product version number-
Additional feature-
Special features-
VersionEmergency stop
Assignment diagram-
Assured release distance Sar-
Safety classIII
Switching element2 pos. driven NC
Safety data protocol-
Fusing0,25 ... 8 A
Bus data protocol-
Operating voltage DC24 V DC -15% ... 15% Rev...
Auxiliary voltage DC-
Connecting cable-
Transponder coding-
Degree of contamination (external, according to EN 60947-1)3
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Locking force FZh-
Maximum feed-in current in the connection block-
Guard locking principle-
Current consumption40 mA
Rated impulse withstand voltage Uimp0,5 kV
Rated insulation voltage Ui50 V
Connection2 plug connectors M12, 5-pin
Switching frequencymax.0,5 Hz
Installation orientationDoor hinge DIN right
Degree of protectionIP65 (Screwed tight plug co...
Ambient temperature-20 ... +55 °C
Mechanical life1 x 10⁶
Shock and vibration resistanceIn acc. with EN 60947-5-3
Reaction time-
Housing materialFiber glass reinforced therm...
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current1 ... 100 mA
Repeat accuracy R10 %
Detent mechanismSnap-in bolt
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage5 ... 24 V
Switching current1 ... 150 mA
Type of output2 semiconductor outputs, p-s...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0 ... 1 V DC
Connection rating1 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.100 ms
Extraction force20 N
Test pulsesmax.0,3 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delaymax.1 s
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
122813
Euchner
122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release
Weight1.763696 lb
SeriesCTP-AR
Product ClassSafety System
Mission time20 y
Safety Integrity Level-
B10D-
PFHD4.1 x 10 ⁻⁹
Category4
Performance LevelPL e
Diagnostic Coverage (DC)-
Product version number-
Additional featureEscape release actuated by p...
Special features-
Version-
Assignment diagram-
Assured release distance Sar-
Safety classIII
Switching element-
Safety data protocol-
Fusing0,25 ... 8 A
Bus data protocol-
Operating voltage DC24 V DC -15% ... 15% Rev...
Auxiliary voltage DC-
Connecting cable-
Transponder coding-
Degree of contamination (external, according to EN 60947-1)3
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...
Maximum feed-in current in the connection block-
Guard locking principleClosed-circuit current princ...
Current consumption40 mA
Rated impulse withstand voltage Uimp0,5 kV
Rated insulation voltage Ui50 V
Connection2 plug connectors M12, 5 and...
Switching frequencymax.0,5 Hz
Installation orientationAny
Degree of protectionIP67/IP69/IP69K (Screwed ti...
Ambient temperature-20 ... +55 °C
Mechanical life1 x 10⁶
Shock and vibration resistanceIn acc. with EN 60947-5-3
Reaction time-
Housing materialDie-cast zinc
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current-
Repeat accuracy R10 %
Detent mechanism-
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage-
Switching current1 ... 50 mA
Type of outputp-switching, short circuit-p...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0,8xUB ... UB V DC
Connection rating6 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.140 ms
Extraction force20 N
Test pulsesmax.1,0 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delay8 s
Risk time according to EN 60947-5-3max.260 ms
Solenoid duty cycle100 %
Solenoid operating voltage DC24 V DC -15% ... +10% Re...
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Locking force Fmax3900 N
Retention force20 N
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 136390?
The price of 136390 on MQ Automation is $3,250.29. Order now.
Out if stock but available for backorder.
136390 Euchner - Locking module MGB-L1...-EI (guard locking by spring force) with 4 pushbuttons, emergency stop
Similar products from: Safety Accessories
What can I help you find today?
