136388 Euchner Safety Accessories
Part#:136388
Alt. Part#:MGB-L1B-EIA-R-136388
Manufacturer:Euchner
Category:Safety Accessories
Product Lifecycle:Active
Product description
136388 Euchner - Locking module MGB-L1...-EI (guard locking by spring force) with 4 pushbuttons, emergency stop
Product Details
- Weight 8.21661874 lb
- Series MGB-EI
- Product Class Accessories
- B10D 0,13 x 10⁶
- Mission time 20
- Safety Integrity Level SIL 3 (EN 62061:2005)
- Diagnostic Coverage (DC) 99
- Product version number V1.2
- Performance Level PL e
- PFHD 3.37 x 10⁻⁹ (Fixed failure rate without consideration of faults in wearing parts.)
- Switching element 2 pos. driven NC
- Category 4
- Additional feature Incl. cover set ID. No. 120344
- Special features With adhesive ring
- Fusing min.1 A Slow blow
- Assignment diagram B1
- Safety data protocol CIP Safety
- Version Emergency stop illuminated
- Bus data protocol Ethernet/IP
- Assured release distance Sar max.65 mm
- Auxiliary voltage DC 24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
- Transponder coding Unicode
- Operating voltage DC 24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
- Safety class III
- Degree of contamination (external, according to EN 60947-1) 3
- Maximum feed-in current in the connection block max.4000 mA
- Connecting cable Ethernet/IP cable, Cat. 5e min.
- Locking force FZh 2000 N
- EMC protection requirements In accordance with EN 61000-4 and EN 61326-3-1
- Guard locking principle Closed-circuit current principle
- Rated insulation voltage Ui 75 V
- Current consumption max.500 mA
- Rated impulse withstand voltage Uimp 0,5 kV
- Connection M12 D-coded, screened (X3)
- Installation orientation Door hinge DIN right
- Housing material Reinforced plastic, die-cast zinc nickel-plated, stainless steel
- Switching frequency 0,25 Hz
- Degree of protection IP54
- Shock and vibration resistance In acc. with EN 60947-5-3
- Reaction time max.250 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
- Weight 3,1 kg
- Ambient temperature -20 ... 55 °C
- Mechanical life 0,1 x 10⁶
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 136388 on MQ Automation is $3,250.29. Order now.
About the product
Guard locking with guard lock monitoring;Emergency stop according to ISO 13850, illuminated;4 illuminated pushbuttons;including adhesive labels;Connection via M12 plug;Pre-assembled on mounting plates;Unicode
Manufacturer warranty
136388 Euchner
$3,250.29
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$3,250.29
$3,250.29 each
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 136388 with other products
Weight
Series
Product Class
B10D
Mission time
Safety Integrity Level
Diagnostic Coverage (DC)
Product version number
Performance Level
PFHD
Switching element
Category
Additional feature
Special features
Fusing
Assignment diagram
Safety data protocol
Version
Bus data protocol
Assured release distance ...
Auxiliary voltage DC
Transponder coding
Operating voltage DC
Safety class
Degree of contamination (...
Maximum feed-in current i...
Connecting cable
Locking force FZh
EMC protection requiremen...
Guard locking principle
Rated insulation voltage ...
Current consumption
Rated impulse withstand v...
Connection
Installation orientation
Housing material
Switching frequency
Degree of protection
Shock and vibration resis...
Reaction time
Ambient temperature
Mechanical life
For the approval acc. to ...
Operating current
Repeat accuracy R
Detent mechanism
Discrepancy time
Off-state current Ir
Operating voltage
Switching current
Type of output
Turn-on time
Switching load
Output voltage
Connection rating
Utilization category acc....
Overtravel
Test-pulse interval
Extraction force
Test pulses
Actuating force
Approach speed
Ready delay
Risk time according to EN...
Solenoid duty cycle
Solenoid operating voltag...
Extension of risk time ac...
Locking force Fmax
Retention force
Selected product
136388
Euchner
136388 Euchner - Locking module MGB-L1...-EI (guard locking by spring force) with 4 pushbuttons, eme...
Weight8.21661874 lb
SeriesMGB-EI
Product ClassAccessories
B10D0,13 x 10⁶
Mission time20
Safety Integrity LevelSIL 3 (EN 62061:2005)
Diagnostic Coverage (DC)99
Product version numberV1.2
Performance LevelPL e
PFHD3.37 x 10⁻⁹ (Fixed failure ...
Switching element2 pos. driven NC
Category4
Additional featureIncl. cover set ID. No. 1203...
Special featuresWith adhesive ring
Fusingmin.1 A Slow blow
Assignment diagramB1
Safety data protocolCIP Safety
VersionEmergency stop illuminated
Bus data protocolEthernet/IP
Assured release distance Sarmax.65 mm
Auxiliary voltage DC24 V DC -15% ... +10% (Th...
Transponder codingUnicode
Operating voltage DC24 V DC -15% ... 10% ((Re...
Safety classIII
Degree of contamination (external, according to EN 60947-1)3
Maximum feed-in current in the connection blockmax.4000 mA
Connecting cableEthernet/IP cable, Cat. 5e m...
Locking force FZh2000 N
EMC protection requirementsIn accordance with EN 61000-...
Guard locking principleClosed-circuit current princ...
Rated insulation voltage Ui75 V
Current consumptionmax.500 mA
Rated impulse withstand voltage Uimp0,5 kV
ConnectionM12 D-coded, screened (X3)
Installation orientationDoor hinge DIN right
Housing materialReinforced plastic, die-cast...
Switching frequency0,25 Hz
Degree of protectionIP54
Shock and vibration resistanceIn acc. with EN 60947-5-3
Reaction timemax.250 ms Switch-off time...
Ambient temperature-20 ... 55 °C
Mechanical life0,1 x 10⁶
For the approval acc. to UL the following applies-
Operating current-
Repeat accuracy R-
Detent mechanism-
Discrepancy time-
Off-state current Ir-
Operating voltage-
Switching current-
Type of output-
Turn-on time-
Switching load-
Output voltage-
Connection rating-
Utilization category acc. to EN 60947-5-2-
Overtravel-
Test-pulse interval-
Extraction force-
Test pulses-
Actuating force-
Approach speed-
Ready delay-
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
Weight3.968316 lb
SeriesMGBS-P-I-AP
Product ClassSafety System
B10D0,13 x 10⁶
Mission time20 y
Safety Integrity Level-
Diagnostic Coverage (DC)-
Product version number-
Performance LevelPL e
PFHD4.1 x 10 ⁻⁹
Switching element2 pos. driven NC
Category4
Additional feature-
Special features-
Fusing0,25 ... 8 A
Assignment diagram-
Safety data protocol-
VersionEmergency stop
Bus data protocol-
Assured release distance Sar-
Auxiliary voltage DC-
Transponder coding-
Operating voltage DC24 V DC -15% ... 15% Rev...
Safety classIII
Degree of contamination (external, according to EN 60947-1)3
Maximum feed-in current in the connection block-
Connecting cable-
Locking force FZh-
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Guard locking principle-
Rated insulation voltage Ui50 V
Current consumption40 mA
Rated impulse withstand voltage Uimp0,5 kV
Connection2 plug connectors M12, 5-pin
Installation orientationDoor hinge DIN right
Housing materialFiber glass reinforced therm...
Switching frequencymax.0,5 Hz
Degree of protectionIP65 (Screwed tight plug co...
Shock and vibration resistanceIn acc. with EN 60947-5-3
Reaction time-
Ambient temperature-20 ... +55 °C
Mechanical life1 x 10⁶
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current1 ... 100 mA
Repeat accuracy R10 %
Detent mechanismSnap-in bolt
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage5 ... 24 V
Switching current1 ... 150 mA
Type of output2 semiconductor outputs, p-s...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0 ... 1 V DC
Connection rating1 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.100 ms
Extraction force20 N
Test pulsesmax.0,3 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delaymax.1 s
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
122813
Euchner
122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release
Weight1.763696 lb
SeriesCTP-AR
Product ClassSafety System
B10D-
Mission time20 y
Safety Integrity Level-
Diagnostic Coverage (DC)-
Product version number-
Performance LevelPL e
PFHD4.1 x 10 ⁻⁹
Switching element-
Category4
Additional featureEscape release actuated by p...
Special features-
Fusing0,25 ... 8 A
Assignment diagram-
Safety data protocol-
Version-
Bus data protocol-
Assured release distance Sar-
Auxiliary voltage DC-
Transponder coding-
Operating voltage DC24 V DC -15% ... 15% Rev...
Safety classIII
Degree of contamination (external, according to EN 60947-1)3
Maximum feed-in current in the connection block-
Connecting cable-
Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Guard locking principleClosed-circuit current princ...
Rated insulation voltage Ui50 V
Current consumption40 mA
Rated impulse withstand voltage Uimp0,5 kV
Connection2 plug connectors M12, 5 and...
Installation orientationAny
Housing materialDie-cast zinc
Switching frequencymax.0,5 Hz
Degree of protectionIP67/IP69/IP69K (Screwed ti...
Shock and vibration resistanceIn acc. with EN 60947-5-3
Reaction time-
Ambient temperature-20 ... +55 °C
Mechanical life1 x 10⁶
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current-
Repeat accuracy R10 %
Detent mechanism-
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage-
Switching current1 ... 50 mA
Type of outputp-switching, short circuit-p...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0,8xUB ... UB V DC
Connection rating6 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.140 ms
Extraction force20 N
Test pulsesmax.1,0 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delay8 s
Risk time according to EN 60947-5-3max.260 ms
Solenoid duty cycle100 %
Solenoid operating voltage DC24 V DC -15% ... +10% Re...
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Locking force Fmax3900 N
Retention force20 N
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 136388?
The price of 136388 on MQ Automation is $3,250.29. Order now.
Out if stock but available for backorder.
136388 Euchner - Locking module MGB-L1...-EI (guard locking by spring force) with 4 pushbuttons, emergency stop
Similar products from: Safety Accessories
What can I help you find today?
