126635 Euchner Safety Accessories
Part#:126635
Alt. Part#:MGB-L1B-EIA-R-126635
Manufacturer:Euchner
Category:Safety Accessories
Product Lifecycle:Active
Product description
126635 Euchner - Locking module MGB-L1...-EI (guard locking by spring force) with 2 pushbuttons, emergency stop
Product Details
- Weight 7.95206434 lb
- Series MGB-EI
- Product Class Accessories
- Mission time 20
- Safety Integrity Level SIL 3 (EN 62061:2005)
- B10D 0,13 x 10⁶
- Diagnostic Coverage (DC) 99
- PFHD 3.37 x 10⁻⁹ (Fixed failure rate without consideration of faults in wearing parts.)
- Category 4
- Performance Level PL e
- Switching element 2 pos. driven NC
- Product version number V1.2
- Additional feature Incl. cover set ID. No. 120344
- Special features With adhesive ring
- Version Emergency stop illuminated
- Assignment diagram B0
- Bus data protocol Ethernet/IP
- Safety data protocol CIP Safety
- Assured release distance Sar max.65 mm
- Fusing min.1 A Slow blow
- Operating voltage DC 24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
- Auxiliary voltage DC 24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
- Transponder coding Unicode
- Safety class III
- Connecting cable Ethernet/IP cable, Cat. 5e min.
- EMC protection requirements In accordance with EN 61000-4 and EN 61326-3-1
- Degree of contamination (external, according to EN 60947-1) 3
- Rated impulse withstand voltage Uimp 0,5 kV
- Maximum feed-in current in the connection block max.4000 mA
- Rated insulation voltage Ui 75 V
- Current consumption max.500 mA
- Locking force FZh 2000 N
- Guard locking principle Closed-circuit current principle
- Shock and vibration resistance In acc. with EN 60947-5-3
- Mechanical life 0,1 x 10⁶
- Weight 3,1 kg
- Reaction time max.100 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
- Degree of protection IP54
- Housing material Reinforced plastic, die-cast zinc nickel-plated, stainless steel
- Connection M12 D-coded, screened (X3)
- Installation orientation Door hinge DIN right
- Switching frequency 0,25 Hz
- Ambient temperature -20 ... 55 °C
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 126635 on MQ Automation is $3,041.49. Order now.
About the product
Guard locking with guard lock monitoring;Emergency stop according to ISO 13850, illuminated;2 illuminated pushbuttons;including adhesive labels;Connection via M12 plug;Pre-assembled on mounting plates;Unicode
Manufacturer warranty
126635 Euchner
$3,041.49
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$3,041.49
$3,041.49 each
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 126635 with other products
Weight
Series
Product Class
Mission time
Safety Integrity Level
B10D
Diagnostic Coverage (DC)
PFHD
Category
Performance Level
Switching element
Product version number
Additional feature
Special features
Version
Assignment diagram
Bus data protocol
Safety data protocol
Assured release distance ...
Fusing
Operating voltage DC
Auxiliary voltage DC
Transponder coding
Safety class
Connecting cable
EMC protection requiremen...
Degree of contamination (...
Rated impulse withstand v...
Maximum feed-in current i...
Rated insulation voltage ...
Current consumption
Locking force FZh
Guard locking principle
Shock and vibration resis...
Mechanical life
Reaction time
Degree of protection
Housing material
Connection
Installation orientation
Switching frequency
Ambient temperature
For the approval acc. to ...
Operating current
Repeat accuracy R
Detent mechanism
Discrepancy time
Off-state current Ir
Operating voltage
Switching current
Type of output
Turn-on time
Switching load
Output voltage
Connection rating
Utilization category acc....
Overtravel
Test-pulse interval
Extraction force
Test pulses
Actuating force
Approach speed
Ready delay
Risk time according to EN...
Solenoid duty cycle
Solenoid operating voltag...
Extension of risk time ac...
Locking force Fmax
Retention force
Selected product
126635
Euchner
126635 Euchner - Locking module MGB-L1...-EI (guard locking by spring force) with 2 pushbuttons, eme...
Weight7.95206434 lb
SeriesMGB-EI
Product ClassAccessories
Mission time20
Safety Integrity LevelSIL 3 (EN 62061:2005)
B10D0,13 x 10⁶
Diagnostic Coverage (DC)99
PFHD3.37 x 10⁻⁹ (Fixed failure ...
Category4
Performance LevelPL e
Switching element2 pos. driven NC
Product version numberV1.2
Additional featureIncl. cover set ID. No. 1203...
Special featuresWith adhesive ring
VersionEmergency stop illuminated
Assignment diagramB0
Bus data protocolEthernet/IP
Safety data protocolCIP Safety
Assured release distance Sarmax.65 mm
Fusingmin.1 A Slow blow
Operating voltage DC24 V DC -15% ... 10% ((Re...
Auxiliary voltage DC24 V DC -15% ... +10% (Th...
Transponder codingUnicode
Safety classIII
Connecting cableEthernet/IP cable, Cat. 5e m...
EMC protection requirementsIn accordance with EN 61000-...
Degree of contamination (external, according to EN 60947-1)3
Rated impulse withstand voltage Uimp0,5 kV
Maximum feed-in current in the connection blockmax.4000 mA
Rated insulation voltage Ui75 V
Current consumptionmax.500 mA
Locking force FZh2000 N
Guard locking principleClosed-circuit current princ...
Shock and vibration resistanceIn acc. with EN 60947-5-3
Mechanical life0,1 x 10⁶
Reaction timemax.100 ms Switch-off time...
Degree of protectionIP54
Housing materialReinforced plastic, die-cast...
ConnectionM12 D-coded, screened (X3)
Installation orientationDoor hinge DIN right
Switching frequency0,25 Hz
Ambient temperature-20 ... 55 °C
For the approval acc. to UL the following applies-
Operating current-
Repeat accuracy R-
Detent mechanism-
Discrepancy time-
Off-state current Ir-
Operating voltage-
Switching current-
Type of output-
Turn-on time-
Switching load-
Output voltage-
Connection rating-
Utilization category acc. to EN 60947-5-2-
Overtravel-
Test-pulse interval-
Extraction force-
Test pulses-
Actuating force-
Approach speed-
Ready delay-
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
Weight3.968316 lb
SeriesMGBS-P-I-AP
Product ClassSafety System
Mission time20 y
Safety Integrity Level-
B10D0,13 x 10⁶
Diagnostic Coverage (DC)-
PFHD4.1 x 10 ⁻⁹
Category4
Performance LevelPL e
Switching element2 pos. driven NC
Product version number-
Additional feature-
Special features-
VersionEmergency stop
Assignment diagram-
Bus data protocol-
Safety data protocol-
Assured release distance Sar-
Fusing0,25 ... 8 A
Operating voltage DC24 V DC -15% ... 15% Rev...
Auxiliary voltage DC-
Transponder coding-
Safety classIII
Connecting cable-
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Degree of contamination (external, according to EN 60947-1)3
Rated impulse withstand voltage Uimp0,5 kV
Maximum feed-in current in the connection block-
Rated insulation voltage Ui50 V
Current consumption40 mA
Locking force FZh-
Guard locking principle-
Shock and vibration resistanceIn acc. with EN 60947-5-3
Mechanical life1 x 10⁶
Reaction time-
Degree of protectionIP65 (Screwed tight plug co...
Housing materialFiber glass reinforced therm...
Connection2 plug connectors M12, 5-pin
Installation orientationDoor hinge DIN right
Switching frequencymax.0,5 Hz
Ambient temperature-20 ... +55 °C
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current1 ... 100 mA
Repeat accuracy R10 %
Detent mechanismSnap-in bolt
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage5 ... 24 V
Switching current1 ... 150 mA
Type of output2 semiconductor outputs, p-s...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0 ... 1 V DC
Connection rating1 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.100 ms
Extraction force20 N
Test pulsesmax.0,3 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delaymax.1 s
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
122813
Euchner
122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release
Weight1.763696 lb
SeriesCTP-AR
Product ClassSafety System
Mission time20 y
Safety Integrity Level-
B10D-
Diagnostic Coverage (DC)-
PFHD4.1 x 10 ⁻⁹
Category4
Performance LevelPL e
Switching element-
Product version number-
Additional featureEscape release actuated by p...
Special features-
Version-
Assignment diagram-
Bus data protocol-
Safety data protocol-
Assured release distance Sar-
Fusing0,25 ... 8 A
Operating voltage DC24 V DC -15% ... 15% Rev...
Auxiliary voltage DC-
Transponder coding-
Safety classIII
Connecting cable-
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Degree of contamination (external, according to EN 60947-1)3
Rated impulse withstand voltage Uimp0,5 kV
Maximum feed-in current in the connection block-
Rated insulation voltage Ui50 V
Current consumption40 mA
Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...
Guard locking principleClosed-circuit current princ...
Shock and vibration resistanceIn acc. with EN 60947-5-3
Mechanical life1 x 10⁶
Reaction time-
Degree of protectionIP67/IP69/IP69K (Screwed ti...
Housing materialDie-cast zinc
Connection2 plug connectors M12, 5 and...
Installation orientationAny
Switching frequencymax.0,5 Hz
Ambient temperature-20 ... +55 °C
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current-
Repeat accuracy R10 %
Detent mechanism-
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage-
Switching current1 ... 50 mA
Type of outputp-switching, short circuit-p...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0,8xUB ... UB V DC
Connection rating6 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.140 ms
Extraction force20 N
Test pulsesmax.1,0 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delay8 s
Risk time according to EN 60947-5-3max.260 ms
Solenoid duty cycle100 %
Solenoid operating voltage DC24 V DC -15% ... +10% Re...
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Locking force Fmax3900 N
Retention force20 N
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 126635?
The price of 126635 on MQ Automation is $3,041.49. Order now.
Out if stock but available for backorder.
126635 Euchner - Locking module MGB-L1...-EI (guard locking by spring force) with 2 pushbuttons, emergency stop
Similar products from: Safety Accessories
What can I help you find today?
