122812 Euchner Safety Switches

122812 on MQ Automation
Euchner
  • 122812
  • 122812
  • 122812

Part#:122812

Alt. Part#:CTP-L1-AR-U-HA-AZ-SAB-122812

Manufacturer:Euchner

Category:Safety Switches

Product Lifecycle:Active

13 in stock

Mar 15, 2025

Product description

122812 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12

Product Details

  • Weight
    1.322772 lb
  • Series
    CTP-AR
  • Product Class
    Safety System
  • PFHD
    4.1 x 10 ⁻⁹
  • Mission time
    20 y
  • Performance Level
    PL e
  • Category
    4
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures see operating instructions
  • Discrepancy time
    max.10 ms In acc. with EN IEC 60947-5-3
  • Repeat accuracy R
    10 %
  • Turn-on time
    max.400 ms
  • Off-state current Ir
    max.0,25 mA
  • Switching current
    1 ... 150 mA
  • Output voltage
    0 ... 1 V DC
  • Type of output
    2 semiconductor outputs, p-switching, short circuit-proof
  • Switching load
    24V DC, class 2 (Alternatively see operating instructions)
  • Risk time according to EN 60947-5-3
    max.260 ms
  • Safety class
    III
  • Rated insulation voltage Ui
    50 V
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Solenoid duty cycle
    100 %
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Connection rating
    6 W
  • Fusing
    0,5 ... 8 A
  • Rated impulse withstand voltage Uimp
    0,5 kV
  • Utilization category acc. to EN 60947-5-2
    24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
  • Solenoid operating voltage DC
    24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Current consumption
    40 mA
  • Operating voltage DC
    24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Test pulses
    max.1,0 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
  • Test-pulse interval
    min.140 ms
  • Extension of risk time according to EN 60947-5-3 per device
    max.5 ms
  • Overtravel
    5 mm
  • Extraction force
    20 N
  • Actuating force
    10 N
  • Retention force
    20 N
  • Locking force FZh
    3000 N (Fzh = Fmax/1.3 Depending on the actuator used)
  • Locking force Fmax
    3900 N
  • Connection
    2 plug connectors M12, 5 and 8-pin
  • Approach speed
    max.20 m/min
  • Guard locking principle
    Closed-circuit current principle
  • Switching frequency
    max.0,5 Hz
  • Mechanical life
    1 x 10⁶
  • Ready delay
    8 s
  • Installation orientation
    Any
  • Degree of protection
    IP67/IP69/IP69K (Screwed tight plug connector/mating component)
  • Ambient temperature
    -20 ... +55 °C
  • Housing material
    Fiber glass reinforced thermoplastic
  • Weight
    0,42 kg
  • Shock and vibration resistance
    In acc. with EN 60947-5-3

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 122812 on MQ Automation is $772.00. Order now.


About the product

Safety switch with guard locking and integrated evaluation electronics;Up to 20 switches in series;Short circuit monitoring;2 safety outputs (semiconductor outputs);Up to category 4 / PL e according to EN ISO 13849-1;With 2 plug connectors M12;Unicode;Door monitoring output;Approach directions A, B and C (delivery state)


This item can ship in 3-5 days!

Manufacturer warranty

122812 Euchner

$772.00

Your price can be lower.
Log in or Create account to check your discount

Stock:

13

Select Qty:

$772.00

$772.00 each

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 122812 with other products

Weight

Series

Product Class

PFHD

Mission time

Performance Level

Category

For the approval acc. to ...

Discrepancy time

Repeat accuracy R

Turn-on time

Off-state current Ir

Switching current

Output voltage

Type of output

Switching load

Risk time according to EN...

Safety class

Rated insulation voltage ...

Degree of contamination (...

Solenoid duty cycle

EMC protection requiremen...

Connection rating

Fusing

Rated impulse withstand v...

Utilization category acc....

Solenoid operating voltag...

Current consumption

Operating voltage DC

Test pulses

Test-pulse interval

Extension of risk time ac...

Overtravel

Extraction force

Actuating force

Retention force

Locking force FZh

Locking force Fmax

Connection

Approach speed

Guard locking principle

Switching frequency

Mechanical life

Ready delay

Installation orientation

Degree of protection

Ambient temperature

Housing material

Shock and vibration resis...

Additional feature

B10D

Version

Operating current

Switching element

Detent mechanism

Operating voltage

Selected product

122812
13 in stock
122812
Euchner

122812 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12

Weight1.322772 lb

SeriesCTP-AR

Product ClassSafety System

PFHD4.1 x 10 ⁻⁹

Mission time20 y

Performance LevelPL e

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Discrepancy timemax.10 ms In acc. with EN ...

Repeat accuracy R10 %

Turn-on timemax.400 ms

Off-state current Irmax.0,25 mA

Switching current1 ... 150 mA

Output voltage0 ... 1 V DC

Type of output2 semiconductor outputs, p-s...

Switching load24V DC, class 2 (Alternativ...

Risk time according to EN 60947-5-3max.260 ms

Safety classIII

Rated insulation voltage Ui50 V

Degree of contamination (external, according to EN 60947-1)3

Solenoid duty cycle100 %

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating6 W

Fusing0,5 ... 8 A

Rated impulse withstand voltage Uimp0,5 kV

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Test pulsesmax.1,0 ms (Applies for a l...

Test-pulse intervalmin.140 ms

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Overtravel5 mm

Extraction force20 N

Actuating force10 N

Retention force20 N

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Locking force Fmax3900 N

Connection2 plug connectors M12, 5 and...

Approach speedmax.20 m/min

Guard locking principleClosed-circuit current princ...

Switching frequencymax.0,5 Hz

Mechanical life1 x 10⁶

Ready delay8 s

Installation orientationAny

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Ambient temperature-20 ... +55 °C

Housing materialFiber glass reinforced therm...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Additional feature-

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

PFHD4.1 x 10 ⁻⁹

Mission time20 y

Performance LevelPL e

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Discrepancy timemax.10 ms In acc. with EN ...

Repeat accuracy R10 %

Turn-on timemax.400 ms

Off-state current Irmax.0,25 mA

Switching current1 ... 50 mA

Output voltage0,8xUB ... UB V DC

Type of outputp-switching, short circuit-p...

Switching load24V DC, class 2 (Alternativ...

Risk time according to EN 60947-5-3max.260 ms

Safety classIII

Rated insulation voltage Ui50 V

Degree of contamination (external, according to EN 60947-1)3

Solenoid duty cycle100 %

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating6 W

Fusing0,25 ... 8 A

Rated impulse withstand voltage Uimp0,5 kV

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Test pulsesmax.1,0 ms (Applies for a l...

Test-pulse intervalmin.140 ms

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Overtravel5 mm

Extraction force20 N

Actuating force10 N

Retention force20 N

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Locking force Fmax3900 N

Connection2 plug connectors M12, 5 and...

Approach speedmax.20 m/min

Guard locking principleClosed-circuit current princ...

Switching frequencymax.0,5 Hz

Mechanical life1 x 10⁶

Ready delay8 s

Installation orientationAny

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Ambient temperature-20 ... +55 °C

Housing materialDie-cast zinc

Shock and vibration resistanceIn acc. with EN 60947-5-3

Additional featureEscape release actuated by p...

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

PFHD4.1 x 10 ⁻⁹

Mission time20 y

Performance LevelPL e

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Discrepancy timemax.10 ms In acc. with EN ...

Repeat accuracy R10 %

Turn-on timemax.400 ms

Off-state current Irmax.0,25 mA

Switching current1 ... 150 mA

Output voltage0 ... 1 V DC

Type of output2 semiconductor outputs, p-s...

Switching load24V DC, class 2 (Alternativ...

Risk time according to EN 60947-5-3-

Safety classIII

Rated insulation voltage Ui50 V

Degree of contamination (external, according to EN 60947-1)3

Solenoid duty cycle-

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating1 W

Fusing0,25 ... 8 A

Rated impulse withstand voltage Uimp0,5 kV

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Solenoid operating voltage DC-

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Test pulsesmax.0,3 ms (Applies for a l...

Test-pulse intervalmin.100 ms

Extension of risk time according to EN 60947-5-3 per device-

Overtravel5 mm

Extraction force20 N

Actuating force10 N

Retention force-

Locking force FZh-

Locking force Fmax-

Connection2 plug connectors M12, 5-pin

Approach speedmax.20 m/min

Guard locking principle-

Switching frequencymax.0,5 Hz

Mechanical life1 x 10⁶

Ready delaymax.1 s

Installation orientationDoor hinge DIN right

Degree of protectionIP65 (Screwed tight plug co...

Ambient temperature-20 ... +55 °C

Housing materialFiber glass reinforced therm...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Additional feature-

B10D0,13 x 10⁶

VersionEmergency stop

Operating current1 ... 100 mA

Switching element2 pos. driven NC

Detent mechanismSnap-in bolt

Operating voltage5 ... 24 V

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

Relevant products

FAQ

What is the price of 122812?
The price of 122812 on MQ Automation is $772.00. Order now.

Out if stock but available for backorder.

122812 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12

Similar products from: Safety Switches

What can I help you find today?

Recommended parts