119106 Euchner Safety Proximity Sensors

119106 on MQ Automation
Euchner
  • 119106
  • 119106
  • 119106

Part#:119106

Alt. Part#:CET3-AP-CRA-AH-50F-SH-C2312-119106

Manufacturer:Euchner

Category:Safety Proximity Sensors

Product Lifecycle:Active

Product description

119106 Euchner - Non-contact safety switch CET-AP-..., with plug connector RC18 and escape release

Product Details

  • Weight
    3.60675832 lb
  • Series
    CET-AP
  • Product Class
    Safety System
  • Category
    4
  • PFHD
    3.1 x 10⁻⁹
  • Mission time
    20 y
  • Performance Level
    PL e
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures see operating instructions
  • Discrepancy time
    max.10 ms
  • Repeat accuracy R
    10 %
  • Input voltage
    15 ... 27,6 V DC
  • Turn-on time
    400 ms
  • Risk time according to EN 60947-5-3
    max.400 ms
  • Output voltage
    0,8xUB ... UB V DC
  • Off-state current Ir
    max.0,25 mA
  • Type of output
    p-switching, short circuit-proof
  • Switching current
    1 ... 50 mA
  • Switching delay from state change
    max.400 ms
  • Safety class
    III
  • Switching load
    24V DC, class 2 (For alternatives see operating instructions)
  • Connecting cable
    30V DC, 2A (For UL requirement UL category code (CYJV2/CYJV8) or (CYJV/CYJV7))
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Solenoid duty cycle
    100 %
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Connection rating
    11 W
  • Solenoid operating voltage DC
    24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Fusing
    0,25 ... 8 A
  • Current consumption
    450 mA
  • Utilization category acc. to EN 60947-5-2
    24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
  • Locking force FZh
    5000 N
  • Locking force Fmax
    6500 N
  • Operating voltage DC
    24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Connection
    1 plug connector M23, 19-pin, RC18
  • Guard locking principle
    Closed-circuit current principle
  • Approach speed
    max.20 m/min
  • Ready delay
    1 s
  • Switching frequency
    max.0,5 Hz
  • Installation orientation
    Any (Preferably head downward)
  • Shock and vibration resistance
    In acc. with EN 60947-5-3
  • Degree of protection
    IP65/IP67 (Screwed tight plug connector/mating component)
  • Mechanical life
    1 x 10⁶
  • Degree of freedom X
    ±5 mm
  • Degree of freedom Y
    ±5 mm
  • Housing material
    Die-cast aluminum
  • Ambient temperature
    -20 ... 55 °C
  • Weight
    1 kg
  • Degree of freedom Z
    ±4 mm

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 119106 on MQ Automation is $1,061.72. Order now.


About the product

Safety switch with guard locking and integrated evaluation electronics;Locking force up to 6500 N;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;Plug connector M23 (RC18);Unicode;Door monitoring output;Indication of the door position by LED;Teach-in input;Escape release, 105 mm long;Approach direction A (delivery state)


Manufacturer warranty

119106 Euchner

$1,061.72

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$1,061.72

$1,061.72 each

Average response time: 11 minutes

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 119106 with other products

Weight

Series

Product Class

Category

PFHD

Mission time

Performance Level

For the approval acc. to ...

Discrepancy time

Repeat accuracy R

Input voltage

Turn-on time

Risk time according to EN...

Output voltage

Off-state current Ir

Type of output

Switching current

Switching delay from stat...

Safety class

Switching load

Connecting cable

Degree of contamination (...

Solenoid duty cycle

EMC protection requiremen...

Connection rating

Solenoid operating voltag...

Fusing

Current consumption

Utilization category acc....

Locking force FZh

Locking force Fmax

Operating voltage DC

Connection

Guard locking principle

Approach speed

Ready delay

Switching frequency

Installation orientation

Shock and vibration resis...

Degree of protection

Mechanical life

Degree of freedom X

Degree of freedom Y

Housing material

Ambient temperature

Degree of freedom Z

Additional feature

Rated impulse withstand v...

Rated insulation voltage ...

Test pulses

Test-pulse interval

Actuating force

Extension of risk time ac...

Extraction force

Overtravel

Retention force

B10D

Version

Operating current

Switching element

Detent mechanism

Operating voltage

Selected product

119106
0 in stock
119106
Euchner

119106 Euchner - Non-contact safety switch CET-AP-..., with plug connector RC18 and escape release

Weight3.60675832 lb

SeriesCET-AP

Product ClassSafety System

Category4

PFHD3.1 x 10⁻⁹

Mission time20 y

Performance LevelPL e

For the approval acc. to UL the following appliesOperation only with UL class...

Discrepancy timemax.10 ms

Repeat accuracy R10 %

Input voltage15 ... 27,6 V DC

Turn-on time400 ms

Risk time according to EN 60947-5-3max.400 ms

Output voltage0,8xUB ... UB V DC

Off-state current Irmax.0,25 mA

Type of outputp-switching, short circuit-p...

Switching current1 ... 50 mA

Switching delay from state changemax.400 ms

Safety classIII

Switching load24V DC, class 2 (For altern...

Connecting cable30V DC, 2A (For UL requirem...

Degree of contamination (external, according to EN 60947-1)3

Solenoid duty cycle100 %

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating11 W

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Fusing0,25 ... 8 A

Current consumption450 mA

Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...

Locking force FZh5000 N

Locking force Fmax6500 N

Operating voltage DC24 V DC -15% ... 15% Rev...

Connection1 plug connector M23, 19-pin...

Guard locking principleClosed-circuit current princ...

Approach speedmax.20 m/min

Ready delay1 s

Switching frequencymax.0,5 Hz

Installation orientationAny (Preferably head downwa...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of protectionIP65/IP67 (Screwed tight pl...

Mechanical life1 x 10⁶

Degree of freedom X±5 mm

Degree of freedom Y±5 mm

Housing materialDie-cast aluminum

Ambient temperature-20 ... 55 °C

Degree of freedom Z±4 mm

Additional feature-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Test pulses-

Test-pulse interval-

Actuating force-

Extension of risk time according to EN 60947-5-3 per device-

Extraction force-

Overtravel-

Retention force-

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

Category4

PFHD4.1 x 10 ⁻⁹

Mission time20 y

Performance LevelPL e

For the approval acc. to UL the following appliesOperation only with UL class...

Discrepancy timemax.10 ms In acc. with EN ...

Repeat accuracy R10 %

Input voltage-

Turn-on timemax.400 ms

Risk time according to EN 60947-5-3max.260 ms

Output voltage0,8xUB ... UB V DC

Off-state current Irmax.0,25 mA

Type of outputp-switching, short circuit-p...

Switching current1 ... 50 mA

Switching delay from state change-

Safety classIII

Switching load24V DC, class 2 (Alternativ...

Connecting cable-

Degree of contamination (external, according to EN 60947-1)3

Solenoid duty cycle100 %

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating6 W

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Fusing0,25 ... 8 A

Current consumption40 mA

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Locking force Fmax3900 N

Operating voltage DC24 V DC -15% ... 15% Rev...

Connection2 plug connectors M12, 5 and...

Guard locking principleClosed-circuit current princ...

Approach speedmax.20 m/min

Ready delay8 s

Switching frequencymax.0,5 Hz

Installation orientationAny

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Mechanical life1 x 10⁶

Degree of freedom X-

Degree of freedom Y-

Housing materialDie-cast zinc

Ambient temperature-20 ... +55 °C

Degree of freedom Z-

Additional featureEscape release actuated by p...

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.1,0 ms (Applies for a l...

Test-pulse intervalmin.140 ms

Actuating force10 N

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Extraction force20 N

Overtravel5 mm

Retention force20 N

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

Category4

PFHD4.1 x 10 ⁻⁹

Mission time20 y

Performance LevelPL e

For the approval acc. to UL the following appliesOperation only with UL class...

Discrepancy timemax.10 ms In acc. with EN ...

Repeat accuracy R10 %

Input voltage-

Turn-on timemax.400 ms

Risk time according to EN 60947-5-3-

Output voltage0 ... 1 V DC

Off-state current Irmax.0,25 mA

Type of output2 semiconductor outputs, p-s...

Switching current1 ... 150 mA

Switching delay from state change-

Safety classIII

Switching load24V DC, class 2 (Alternativ...

Connecting cable-

Degree of contamination (external, according to EN 60947-1)3

Solenoid duty cycle-

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating1 W

Solenoid operating voltage DC-

Fusing0,25 ... 8 A

Current consumption40 mA

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Locking force FZh-

Locking force Fmax-

Operating voltage DC24 V DC -15% ... 15% Rev...

Connection2 plug connectors M12, 5-pin

Guard locking principle-

Approach speedmax.20 m/min

Ready delaymax.1 s

Switching frequencymax.0,5 Hz

Installation orientationDoor hinge DIN right

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of protectionIP65 (Screwed tight plug co...

Mechanical life1 x 10⁶

Degree of freedom X-

Degree of freedom Y-

Housing materialFiber glass reinforced therm...

Ambient temperature-20 ... +55 °C

Degree of freedom Z-

Additional feature-

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.0,3 ms (Applies for a l...

Test-pulse intervalmin.100 ms

Actuating force10 N

Extension of risk time according to EN 60947-5-3 per device-

Extraction force20 N

Overtravel5 mm

Retention force-

B10D0,13 x 10⁶

VersionEmergency stop

Operating current1 ... 100 mA

Switching element2 pos. driven NC

Detent mechanismSnap-in bolt

Operating voltage5 ... 24 V

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

Relevant products

FAQ

What is the price of 119106?
The price of 119106 on MQ Automation is $1,061.72. Order now.

Out if stock but available for backorder.

119106 Euchner - Non-contact safety switch CET-AP-..., with plug connector RC18 and escape release

What can I help you find today?

Recommended parts