111748 Euchner Safety Proximity Sensors

111748 on MQ Automation
Euchner
  • 111748
  • 111748
  • 111748

Part#:111748

Alt. Part#:CES-AP-CR2-AH-SB-111748

Manufacturer:Euchner

Category:Safety Proximity Sensors

Product Lifecycle:Active

Product description

111748 Euchner - Non-contact safety switch CES-AP-CR2-... , M12; pin 5 not used, PUR

Product Details

  • Weight
    0.1763696 lb
  • Series
    CES-AP
  • Product Class
    Safety System
  • Switching hysteresis
    min.1 mm
  • Operating distance
    19 mm
  • Assured operating distance Sao
    min.14 mm
  • Assured release distance Sar
    max.60 mm
  • PFHD
    1.8 x 10⁻⁹
  • Mission time
    20
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures
  • Category
    4
  • Performance Level
    PL e
  • Repeat accuracy R
    ≤ 10
  • Discrepancy time
    max.10 ms
  • Rated conditional short-circuit current
    100 A
  • Off-state current Ir
    max.0,25 mA
  • Output voltage
    UB-1,5V ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.)
  • Test-pulse interval
    min.100 ms
  • Switching current
    1 ... 150 mA
  • Type of output
    Semiconductor outputs, p-switching, short circuit-proof
  • Risk time according to EN 60947-5-3
    max.260 ms
  • Test pulses
    max.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
  • Turn-on time
    max.300 ms
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Rated insulation voltage Ui
    75 V
  • Safety class
    III
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Rated impulse withstand voltage Uimp
    1,5 kV
  • Fusing
    0,25 ... 8 A
  • Utilization category acc. to EN 60947-5-2
    24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
  • Current consumption
    max.30 mA (Without taking into account the load currents on the monitoring output and the safety outputs)
  • Switching frequency
    max.1 Hz
  • Mounting distance
    min.400 mm
  • Operating voltage DC
    24 V DC 15% ... 15% Regulated, residual ripple < 5 %
  • Installation orientation
    Any
  • Ready delay
    0,5 s
  • Tightening torque
    max.1 Nm
  • Mounting method
    Surface mounting on metal
  • Connection
    Connection cable PUR 0.2m with plug connector M12 5-pin, pin 5 not used
  • Static bending radius
    5 x cable diameter
  • Degree of protection
    IP67
  • Cable ambient temperature (dynamic)
    -5 ... 65 °C
  • Shock and vibration resistance
    In acc. with EN 60947-5-3
  • Cable ambient temperature (static)
    -25 ... 65 °C
  • Weight
    0,06 kg
  • Housing material
    Plastic, PBT
  • Dynamic bending radius
    10 x cable diameter

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 111748 on MQ Automation is $252.15. Order now.


About the product

Safety switch with integrated evaluation electronics;No series connection;Short circuit monitoring;2 safety outputs (semiconductor outputs);Door hinge right;Category 4 / PL e according to EN ISO 13849-1;Connecting cable PUR, 0.2 m, plug connector M12, 5-pin; pin 5 not used;Unicode;Two safety screws M4x14 included


Manufacturer warranty

111748 Euchner

$252.15

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$252.15

$252.15 each

Average response time: 11 minutes

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 111748 with other products

Weight

Series

Product Class

Switching hysteresis

Operating distance

Assured operating distanc...

Assured release distance ...

PFHD

Mission time

For the approval acc. to ...

Category

Performance Level

Repeat accuracy R

Discrepancy time

Rated conditional short-c...

Off-state current Ir

Output voltage

Test-pulse interval

Switching current

Type of output

Risk time according to EN...

Test pulses

Turn-on time

Degree of contamination (...

Rated insulation voltage ...

Safety class

EMC protection requiremen...

Rated impulse withstand v...

Fusing

Utilization category acc....

Current consumption

Switching frequency

Mounting distance

Operating voltage DC

Installation orientation

Ready delay

Tightening torque

Mounting method

Connection

Static bending radius

Degree of protection

Cable ambient temperature...

Shock and vibration resis...

Cable ambient temperature...

Housing material

Dynamic bending radius

Extension of risk time ac...

Selected product

111748
0 in stock
111748
Euchner

111748 Euchner - Non-contact safety switch CES-AP-CR2-... , M12; pin 5 not used, PUR

Weight0.1763696 lb

SeriesCES-AP

Product ClassSafety System

Switching hysteresismin.1 mm

Operating distance19 mm

Assured operating distance Saomin.14 mm

Assured release distance Sarmax.60 mm

PFHD1.8 x 10⁻⁹

Mission time20

For the approval acc. to UL the following appliesOperation only with UL class...

Category4

Performance LevelPL e

Repeat accuracy R≤ 10

Discrepancy timemax.10 ms

Rated conditional short-circuit current100 A

Off-state current Irmax.0,25 mA

Output voltageUB-1,5V ... UB V DC (Values...

Test-pulse intervalmin.100 ms

Switching current1 ... 150 mA

Type of outputSemiconductor outputs, p-swi...

Risk time according to EN 60947-5-3max.260 ms

Test pulsesmax.0,3 ms (Applies for a l...

Turn-on timemax.300 ms

Degree of contamination (external, according to EN 60947-1)3

Rated insulation voltage Ui75 V

Safety classIII

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Rated impulse withstand voltage Uimp1,5 kV

Fusing0,25 ... 8 A

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Current consumptionmax.30 mA (Without taking i...

Switching frequencymax.1 Hz

Mounting distancemin.400 mm

Operating voltage DC24 V DC 15% ... 15% Regu...

Installation orientationAny

Ready delay0,5 s

Tightening torquemax.1 Nm

Mounting methodSurface mounting on metal

ConnectionConnection cable PUR 0.2m wi...

Static bending radius5 x cable diameter

Degree of protectionIP67

Cable ambient temperature (dynamic)-5 ... 65 °C

Shock and vibration resistanceIn acc. with EN 60947-5-3

Cable ambient temperature (static)-25 ... 65 °C

Housing materialPlastic, PBT

Dynamic bending radius10 x cable diameter

Extension of risk time according to EN 60947-5-3 per device-

105602
3 in stock
105602
Euchner

105602 Euchner - Non-contact safety switch CES-AP-CL2-..., flying lead, PVC

Weight0.52029032 lb

SeriesCES-AP

Product ClassSafety System

Switching hysteresismin.1 mm

Operating distance19 mm

Assured operating distance Saomin.14 mm

Assured release distance Sarmax.60 mm

PFHD1.8 x 10⁻⁹

Mission time20

For the approval acc. to UL the following appliesOperation only with UL class...

Category4

Performance LevelPL e

Repeat accuracy R≤ 10

Discrepancy timemax.10 ms

Rated conditional short-circuit current100 A

Off-state current Irmax.0,25 mA

Output voltage0,8 x UB ... UB V DC

Test-pulse intervalmin.100 ms

Switching currentmax.50 mA

Type of outputp-switching, short circuit-p...

Risk time according to EN 60947-5-3max.260 ms

Test pulsesmax.0,3 ms (Applies for a l...

Turn-on timemax.300 ms

Degree of contamination (external, according to EN 60947-1)3

Rated insulation voltage Ui75 V

Safety classIII

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Rated impulse withstand voltage Uimp1,5 kV

Fusing0,25 ... 8 A

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Current consumptionmax.30 mA (Without taking i...

Switching frequencymax.1 Hz

Mounting distancemin.400 mm

Operating voltage DC24 V DC 15% ... 15% Regu...

Installation orientationAny

Ready delay0,5 s

Tightening torquemax.1 Nm

Mounting methodSurface mounting on metal

Connectionconnection cable PVC, length...

Static bending radius5 x cable diameter

Degree of protectionIP67, IP69K

Cable ambient temperature (dynamic)0 ... 65 °C

Shock and vibration resistanceIn acc. with EN 60947-5-3

Cable ambient temperature (static)-40 ... 65 °C

Housing materialPlastic, PBT

Dynamic bending radius10 x cable diameter

Extension of risk time according to EN 60947-5-3 per device-

105748
2 in stock
105748
Euchner

105748 Euchner - Non-contact safety switch CES-AR-CL2-... , plug connector M12, PUR

Weight0.29100984 lb

SeriesCES-AR

Product ClassSafety System

Switching hysteresismin.1 mm

Operating distance19 mm

Assured operating distance Saomin.14 mm

Assured release distance Sarmax.60 mm

PFHD1.9 x 10⁻⁹

Mission time20

For the approval acc. to UL the following appliesOperation only with UL class...

Category4

Performance LevelPL e

Repeat accuracy R≤ 10

Discrepancy timemax.10 ms

Rated conditional short-circuit current100 A

Off-state current Irmax.0,25 mA

Output voltage0,8 x UB ... UB V DC

Test-pulse intervalmin.140 ms

Switching currentmax.50 mA

Type of outputp-switching, short circuit-p...

Risk time according to EN 60947-5-3max.260 ms

Test pulsesmax.1 ms (Applies for a loa...

Turn-on timemax.400 ms

Degree of contamination (external, according to EN 60947-1)3

Rated insulation voltage Ui75 V

Safety classIII

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Rated impulse withstand voltage Uimp1,5 kV

Fusing0,25 ... 8 A

Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...

Current consumptionmax.50 mA (Without taking i...

Switching frequencymax.1 Hz

Mounting distancemin.120 mm

Operating voltage DC24 V DC 15% ... 15% Regu...

Installation orientationAny

Ready delay10 s

Tightening torquemax.1 Nm

Mounting methodSurface mounting on metal

ConnectionConnection cable PUR, length...

Static bending radius5 x cable diameter

Degree of protectionIP67

Cable ambient temperature (dynamic)-25 ... 65 °C

Shock and vibration resistanceIn acc. with EN 60947-5-3

Cable ambient temperature (static)-25 ... 65 °C

Housing materialPlastic, PBT

Dynamic bending radius10 x cable diameter

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

Relevant products

FAQ

What is the price of 111748?
The price of 111748 on MQ Automation is $252.15. Order now.

Out if stock but available for backorder.

111748 Euchner - Non-contact safety switch CES-AP-CR2-... , M12; pin 5 not used, PUR

What can I help you find today?

Recommended parts