111708 Euchner Safety Proximity Sensors
Part#:111708
Alt. Part#:CES-AP-C01-CH-SB-111708
Manufacturer:Euchner
Category:Safety Proximity Sensors
Product Lifecycle:Active
Mar 15, 2025
Product description
111708 Euchner - Non-contact safety switch CES-AP-C01-...
Product Details
- Weight 0.42769628 lb
- Series CES-AP
- Product Class Safety System
- Assured release distance Sar max.75 mm
- Switching hysteresis 3 mm (The values apply for surface installation of the actuator on steel.)
- Assured operating distance Sao min.20 mm (The values apply for surface installation of the actuator on steel.)
- Mission time 20
- Operating distance 27 mm
- PFHD 2.1 x 10⁻⁹ (Applying the limit value from EN ISO 13849-1:2008, section 4.5.2 (MTTFd = max. 100 years), BG certifies a PFHd of max. 2.47x10-8.)
- Repeat accuracy R ≤ 10
- Performance Level PL e
- Category 4
- Off-state current Ir max.0,25 mA
- For the approval acc. to UL the following applies Operation only with UL class 2 power supply, or equivalent measures
- Risk time according to EN 60947-5-3 max.260 ms
- Discrepancy time max.10 ms
- Test pulses max.0,4 ms
- Type of output Semiconductor outputs, p-switching, short circuit-proof
- Safety class III
- Output voltage 0 ... 1 V DC
- Rated conditional short-circuit current max.100 A
- Utilization category acc. to EN 60947-5-2 24V 400mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
- Turn-on time max.400 ms
- Switching current 1 ... 400 mA
- EMC protection requirements In acc. with EN IEC 60947-5-3
- Degree of contamination (external, according to EN 60947-1) 3
- Rated impulse withstand voltage Uimp 1,5 kV
- Mounting distance min.40 mm
- Rated insulation voltage Ui 300 V (Tested by employers' liability insurance association up to 75V.)
- Fusing 0,25 ... 8 A
- Current consumption max.50 mA
- Switching frequency max.1 Hz
- Installation orientation Any
- Operating voltage DC 24 V DC 15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
- Connection M12 plug connector, 5-pin, pin 5 not used
- Degree of protection IP67
- Ambient temperature -20 ... 55 °C
- Weight 0,12 kg
- Shock and vibration resistance In acc. with EN 60947-5-3
- Ready delay 0,5 s
- Tightening torque max.1 Nm
- Housing material Plastic, PBT
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 111708 on MQ Automation is $237.87. Order now.
About the product
Safety switch with integrated evaluation electronics;No series connection;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;M12 plug connector 5-pin; pin 5 not used;Multicode
This item can ship in 3-5 days!
Manufacturer warranty
111708 Euchner
$237.87
Your price can be lower.
Log in or Create account to check your discount
Stock:
Select Qty:
$237.87
$237.87 each
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 111708 with other products
Weight
Series
Product Class
Assured release distance ...
Switching hysteresis
Assured operating distanc...
Mission time
Operating distance
PFHD
Repeat accuracy R
Performance Level
Category
Off-state current Ir
For the approval acc. to ...
Risk time according to EN...
Discrepancy time
Test pulses
Type of output
Safety class
Output voltage
Rated conditional short-c...
Utilization category acc....
Turn-on time
Switching current
EMC protection requiremen...
Degree of contamination (...
Rated impulse withstand v...
Mounting distance
Rated insulation voltage ...
Fusing
Current consumption
Switching frequency
Installation orientation
Operating voltage DC
Connection
Degree of protection
Ambient temperature
Shock and vibration resis...
Ready delay
Tightening torque
Housing material
Test-pulse interval
Extension of risk time ac...
Cable ambient temperature...
Mounting method
Static bending radius
Cable ambient temperature...
Dynamic bending radius
Selected product
Weight0.42769628 lb
SeriesCES-AP
Product ClassSafety System
Assured release distance Sarmax.75 mm
Switching hysteresis3 mm (The values apply for ...
Assured operating distance Saomin.20 mm (The values apply...
Mission time20
Operating distance27 mm
PFHD2.1 x 10⁻⁹ (Applying the li...
Repeat accuracy R≤ 10
Performance LevelPL e
Category4
Off-state current Irmax.0,25 mA
For the approval acc. to UL the following appliesOperation only with UL class...
Risk time according to EN 60947-5-3max.260 ms
Discrepancy timemax.10 ms
Test pulsesmax.0,4 ms
Type of outputSemiconductor outputs, p-swi...
Safety classIII
Output voltage0 ... 1 V DC
Rated conditional short-circuit currentmax.100 A
Utilization category acc. to EN 60947-5-224V 400mA (Caution: outputs...
Turn-on timemax.400 ms
Switching current1 ... 400 mA
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Degree of contamination (external, according to EN 60947-1)3
Rated impulse withstand voltage Uimp1,5 kV
Mounting distancemin.40 mm
Rated insulation voltage Ui300 V (Tested by employers...
Fusing0,25 ... 8 A
Current consumptionmax.50 mA
Switching frequencymax.1 Hz
Installation orientationAny
Operating voltage DC24 V DC 15% ... 15% Reve...
ConnectionM12 plug connector, 5-pin, p...
Degree of protectionIP67
Ambient temperature-20 ... 55 °C
Shock and vibration resistanceIn acc. with EN 60947-5-3
Ready delay0,5 s
Tightening torquemax.1 Nm
Housing materialPlastic, PBT
Test-pulse interval-
Extension of risk time according to EN 60947-5-3 per device-
Cable ambient temperature (dynamic)-
Mounting method-
Static bending radius-
Cable ambient temperature (static)-
Dynamic bending radius-
105748
Euchner
105748 Euchner - Non-contact safety switch CES-AR-CL2-... , plug connector M12, PUR
Weight0.29100984 lb
SeriesCES-AR
Product ClassSafety System
Assured release distance Sarmax.60 mm
Switching hysteresismin.1 mm
Assured operating distance Saomin.14 mm
Mission time20
Operating distance19 mm
PFHD1.9 x 10⁻⁹
Repeat accuracy R≤ 10
Performance LevelPL e
Category4
Off-state current Irmax.0,25 mA
For the approval acc. to UL the following appliesOperation only with UL class...
Risk time according to EN 60947-5-3max.260 ms
Discrepancy timemax.10 ms
Test pulsesmax.1 ms (Applies for a loa...
Type of outputp-switching, short circuit-p...
Safety classIII
Output voltage0,8 x UB ... UB V DC
Rated conditional short-circuit current100 A
Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...
Turn-on timemax.400 ms
Switching currentmax.50 mA
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Degree of contamination (external, according to EN 60947-1)3
Rated impulse withstand voltage Uimp1,5 kV
Mounting distancemin.120 mm
Rated insulation voltage Ui75 V
Fusing0,25 ... 8 A
Current consumptionmax.50 mA (Without taking i...
Switching frequencymax.1 Hz
Installation orientationAny
Operating voltage DC24 V DC 15% ... 15% Regu...
ConnectionConnection cable PUR, length...
Degree of protectionIP67
Ambient temperature-
Shock and vibration resistanceIn acc. with EN 60947-5-3
Ready delay10 s
Tightening torquemax.1 Nm
Housing materialPlastic, PBT
Test-pulse intervalmin.140 ms
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Cable ambient temperature (dynamic)-25 ... 65 °C
Mounting methodSurface mounting on metal
Static bending radius5 x cable diameter
Cable ambient temperature (static)-25 ... 65 °C
Dynamic bending radius10 x cable diameter
Weight0.52029032 lb
SeriesCES-AP
Product ClassSafety System
Assured release distance Sarmax.60 mm
Switching hysteresismin.1 mm
Assured operating distance Saomin.14 mm
Mission time20
Operating distance19 mm
PFHD1.8 x 10⁻⁹
Repeat accuracy R≤ 10
Performance LevelPL e
Category4
Off-state current Irmax.0,25 mA
For the approval acc. to UL the following appliesOperation only with UL class...
Risk time according to EN 60947-5-3max.260 ms
Discrepancy timemax.10 ms
Test pulsesmax.0,3 ms (Applies for a l...
Type of outputp-switching, short circuit-p...
Safety classIII
Output voltage0,8 x UB ... UB V DC
Rated conditional short-circuit current100 A
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Turn-on timemax.300 ms
Switching currentmax.50 mA
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Degree of contamination (external, according to EN 60947-1)3
Rated impulse withstand voltage Uimp1,5 kV
Mounting distancemin.400 mm
Rated insulation voltage Ui75 V
Fusing0,25 ... 8 A
Current consumptionmax.30 mA (Without taking i...
Switching frequencymax.1 Hz
Installation orientationAny
Operating voltage DC24 V DC 15% ... 15% Regu...
Connectionconnection cable PVC, length...
Degree of protectionIP67, IP69K
Ambient temperature-
Shock and vibration resistanceIn acc. with EN 60947-5-3
Ready delay0,5 s
Tightening torquemax.1 Nm
Housing materialPlastic, PBT
Test-pulse intervalmin.100 ms
Extension of risk time according to EN 60947-5-3 per device-
Cable ambient temperature (dynamic)0 ... 65 °C
Mounting methodSurface mounting on metal
Static bending radius5 x cable diameter
Cable ambient temperature (static)-40 ... 65 °C
Dynamic bending radius10 x cable diameter
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 111708?
The price of 111708 on MQ Automation is $237.87. Order now.
Out if stock but available for backorder.
111708 Euchner - Non-contact safety switch CES-AP-C01-...
Similar products from: Safety Proximity Sensors
What can I help you find today?
