111145 Euchner Safety Proximity Sensors
Part#:111145
Alt. Part#:CES-AP-C01-AH-SB-111145
Manufacturer:Euchner
Category:Safety Proximity Sensors
Product Lifecycle:Active
Mar 15, 2025
Product description
111145 Euchner - Non-contact safety switch CES-AP-C01-...
Product Details
- Weight 0.32407914 lb
- Series CES-AP
- Product Class Safety System
- Assured operating distance Sao min.18 mm
- Switching hysteresis min.1 mm
- Assured release distance Sar max.58 mm
- Performance Level PL e
- Mission time 20
- Operating distance 22 mm (For surface mounting on aluminum. In a non-metallic environment the typical operating distance increases to 30 mm)
- PFHD 2.1 x 10⁻⁹ (Applying the limit value from EN ISO 13849-1:2008, section 4.5.2 (MTTFd = max. 100 years), BG certifies a PFHd of max. 2.47x10-8.)
- Category 4
- For the approval acc. to UL the following applies Operation only with UL class 2 power supply, or equivalent measures
- Repeat accuracy R ≤ 10
- Discrepancy time max.10 ms
- Rated conditional short-circuit current max.100 A
- Off-state current Ir max.0,25 mA
- Utilization category acc. to EN 60947-5-2 24V 400mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
- Output voltage UB-1,5 ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.)
- Switching current 1 ... 400 mA
- Safety class III
- Type of output Semiconductor outputs, p-switching, short circuit-proof
- Turn-on time max.400 ms
- Test pulses max.0,4 ms
- Degree of contamination (external, according to EN 60947-1) 3
- Risk time according to EN 60947-5-3 max.260 ms
- EMC protection requirements In acc. with EN IEC 60947-5-3
- Rated impulse withstand voltage Uimp 1,5 kV
- Connection M12 plug connector, 5-pin, pin 5 not used
- Current consumption max.50 mA
- Switching frequency max.1 Hz
- Rated insulation voltage Ui 300 V (Tested by employers' liability insurance association up to 75V.)
- Fusing 0,25 ... 8 A
- Operating voltage DC 24 V DC 15% ... 15% Reverse polarity protected, regulated, residual ripple < 5 %, PELV
- Tightening torque max.1 Nm
- Mounting distance min.40 mm
- Degree of protection IP67
- Ambient temperature -20 ... 55 °C
- Ready delay 0,5 s
- Installation orientation Any
- Shock and vibration resistance In acc. with EN 60947-5-3
- Weight 0,12 kg
- Housing material Plastic, PBT
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 111145 on MQ Automation is $386.67. Order now.
About the product
Safety switch with integrated evaluation electronics;No series connection;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;M12 plug connector 5-pin; pin 5 not used;Unicode
This item can ship in 3-5 days!
Manufacturer warranty
111145 Euchner
$386.67
Your price can be lower.
Log in or Create account to check your discount
Stock:
Select Qty:
$386.67
$386.67 each
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 111145 with other products
Weight
Series
Product Class
Assured operating distanc...
Switching hysteresis
Assured release distance ...
Performance Level
Mission time
Operating distance
PFHD
Category
For the approval acc. to ...
Repeat accuracy R
Discrepancy time
Rated conditional short-c...
Off-state current Ir
Utilization category acc....
Output voltage
Switching current
Safety class
Type of output
Turn-on time
Test pulses
Degree of contamination (...
Risk time according to EN...
EMC protection requiremen...
Rated impulse withstand v...
Connection
Current consumption
Switching frequency
Rated insulation voltage ...
Fusing
Operating voltage DC
Tightening torque
Mounting distance
Degree of protection
Ambient temperature
Ready delay
Installation orientation
Shock and vibration resis...
Housing material
Test-pulse interval
Extension of risk time ac...
Cable ambient temperature...
Mounting method
Static bending radius
Cable ambient temperature...
Dynamic bending radius
Selected product
Weight0.32407914 lb
SeriesCES-AP
Product ClassSafety System
Assured operating distance Saomin.18 mm
Switching hysteresismin.1 mm
Assured release distance Sarmax.58 mm
Performance LevelPL e
Mission time20
Operating distance22 mm (For surface mounting...
PFHD2.1 x 10⁻⁹ (Applying the li...
Category4
For the approval acc. to UL the following appliesOperation only with UL class...
Repeat accuracy R≤ 10
Discrepancy timemax.10 ms
Rated conditional short-circuit currentmax.100 A
Off-state current Irmax.0,25 mA
Utilization category acc. to EN 60947-5-224V 400mA (Caution: outputs...
Output voltageUB-1,5 ... UB V DC (Values ...
Switching current1 ... 400 mA
Safety classIII
Type of outputSemiconductor outputs, p-swi...
Turn-on timemax.400 ms
Test pulsesmax.0,4 ms
Degree of contamination (external, according to EN 60947-1)3
Risk time according to EN 60947-5-3max.260 ms
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Rated impulse withstand voltage Uimp1,5 kV
ConnectionM12 plug connector, 5-pin, p...
Current consumptionmax.50 mA
Switching frequencymax.1 Hz
Rated insulation voltage Ui300 V (Tested by employers...
Fusing0,25 ... 8 A
Operating voltage DC24 V DC 15% ... 15% Reve...
Tightening torquemax.1 Nm
Mounting distancemin.40 mm
Degree of protectionIP67
Ambient temperature-20 ... 55 °C
Ready delay0,5 s
Installation orientationAny
Shock and vibration resistanceIn acc. with EN 60947-5-3
Housing materialPlastic, PBT
Test-pulse interval-
Extension of risk time according to EN 60947-5-3 per device-
Cable ambient temperature (dynamic)-
Mounting method-
Static bending radius-
Cable ambient temperature (static)-
Dynamic bending radius-
105748
Euchner
105748 Euchner - Non-contact safety switch CES-AR-CL2-... , plug connector M12, PUR
Weight0.29100984 lb
SeriesCES-AR
Product ClassSafety System
Assured operating distance Saomin.14 mm
Switching hysteresismin.1 mm
Assured release distance Sarmax.60 mm
Performance LevelPL e
Mission time20
Operating distance19 mm
PFHD1.9 x 10⁻⁹
Category4
For the approval acc. to UL the following appliesOperation only with UL class...
Repeat accuracy R≤ 10
Discrepancy timemax.10 ms
Rated conditional short-circuit current100 A
Off-state current Irmax.0,25 mA
Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...
Output voltage0,8 x UB ... UB V DC
Switching currentmax.50 mA
Safety classIII
Type of outputp-switching, short circuit-p...
Turn-on timemax.400 ms
Test pulsesmax.1 ms (Applies for a loa...
Degree of contamination (external, according to EN 60947-1)3
Risk time according to EN 60947-5-3max.260 ms
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Rated impulse withstand voltage Uimp1,5 kV
ConnectionConnection cable PUR, length...
Current consumptionmax.50 mA (Without taking i...
Switching frequencymax.1 Hz
Rated insulation voltage Ui75 V
Fusing0,25 ... 8 A
Operating voltage DC24 V DC 15% ... 15% Regu...
Tightening torquemax.1 Nm
Mounting distancemin.120 mm
Degree of protectionIP67
Ambient temperature-
Ready delay10 s
Installation orientationAny
Shock and vibration resistanceIn acc. with EN 60947-5-3
Housing materialPlastic, PBT
Test-pulse intervalmin.140 ms
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Cable ambient temperature (dynamic)-25 ... 65 °C
Mounting methodSurface mounting on metal
Static bending radius5 x cable diameter
Cable ambient temperature (static)-25 ... 65 °C
Dynamic bending radius10 x cable diameter
Weight0.52029032 lb
SeriesCES-AP
Product ClassSafety System
Assured operating distance Saomin.14 mm
Switching hysteresismin.1 mm
Assured release distance Sarmax.60 mm
Performance LevelPL e
Mission time20
Operating distance19 mm
PFHD1.8 x 10⁻⁹
Category4
For the approval acc. to UL the following appliesOperation only with UL class...
Repeat accuracy R≤ 10
Discrepancy timemax.10 ms
Rated conditional short-circuit current100 A
Off-state current Irmax.0,25 mA
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Output voltage0,8 x UB ... UB V DC
Switching currentmax.50 mA
Safety classIII
Type of outputp-switching, short circuit-p...
Turn-on timemax.300 ms
Test pulsesmax.0,3 ms (Applies for a l...
Degree of contamination (external, according to EN 60947-1)3
Risk time according to EN 60947-5-3max.260 ms
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Rated impulse withstand voltage Uimp1,5 kV
Connectionconnection cable PVC, length...
Current consumptionmax.30 mA (Without taking i...
Switching frequencymax.1 Hz
Rated insulation voltage Ui75 V
Fusing0,25 ... 8 A
Operating voltage DC24 V DC 15% ... 15% Regu...
Tightening torquemax.1 Nm
Mounting distancemin.400 mm
Degree of protectionIP67, IP69K
Ambient temperature-
Ready delay0,5 s
Installation orientationAny
Shock and vibration resistanceIn acc. with EN 60947-5-3
Housing materialPlastic, PBT
Test-pulse intervalmin.100 ms
Extension of risk time according to EN 60947-5-3 per device-
Cable ambient temperature (dynamic)0 ... 65 °C
Mounting methodSurface mounting on metal
Static bending radius5 x cable diameter
Cable ambient temperature (static)-40 ... 65 °C
Dynamic bending radius10 x cable diameter
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 111145?
The price of 111145 on MQ Automation is $386.67. Order now.
Out if stock but available for backorder.
111145 Euchner - Non-contact safety switch CES-AP-C01-...
Similar products from: Safety Proximity Sensors
What can I help you find today?
