110114 Euchner Safety Proximity Sensors

110114 on MQ Automation
Euchner
  • 110114
  • 110114
  • 110114

Part#:110114

Alt. Part#:CET3-AR-CRA-CH-50X-SG-C2290-110114

Manufacturer:Euchner

Category:Safety Proximity Sensors

Product Lifecycle:Active

Product description

110114 Euchner - Non-contact safety switch CET-AR-..., M12, with wire front release (bowden)

Product Details

  • Weight
    4.0013853 lb
  • Series
    CET-AR
  • Product Class
    Safety System
  • Mission time
    20 y
  • Performance Level
    PL e
  • PFHD
    3.1 x 10⁻⁹
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures see operating instructions
  • Category
    4
  • Repeat accuracy R
    10 %
  • Switching delay from state change
    max.400 ms
  • Discrepancy time
    max.10 ms
  • Turn-on time
    400 ms
  • Risk time according to EN 60947-5-3
    max.400 ms
  • Output voltage
    UB-1,5V ... UB V DC
  • Safety class
    III
  • Off-state current Ir
    max.0,25 mA
  • Switching current
    1 ... 200 mA
  • Extension of risk time according to EN 60947-5-3 per device
    max.5 ms
  • Switching load
    24V DC, class 2 (For alternatives see operating instructions)
  • Type of output
    2 semiconductor outputs, p-switching, short circuit-proof
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Connecting cable
    30V DC, 2A (For UL requirement UL category code (CYJV/CYJV7))
  • Solenoid operating voltage DC
    24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Current consumption
    80 mA
  • Utilization category acc. to EN 60947-5-2
    24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Connection rating
    11 W
  • Solenoid duty cycle
    100 %
  • Fusing
    0,25 ... 8 A
  • Operating voltage DC
    24 V DC -15% ... 10%
  • Guard locking principle
    Closed-circuit current principle
  • Locking force FZh
    5000 N (FZH = FMAX/1.3)
  • Connection
    2 plug connectors M12, 5 and 8-pin
  • Locking force Fmax
    6500 N
  • Switching frequency
    max.0,5 Hz
  • Approach speed
    max.20 m/min
  • Ready delay
    10 s
  • Installation orientation
    Any (Preferably head downward)
  • Housing material
    Stainless steel
  • Shock and vibration resistance
    In acc. with EN 60947-5-3
  • Degree of freedom X
    ±5 mm
  • Degree of freedom Y
    ±5 mm
  • Mechanical life
    1 x 10⁶
  • Degree of freedom Z
    ±4 mm
  • Weight
    1 kg
  • Ambient temperature
    -20 ... 55 °C
  • Degree of protection
    IP67 (Screwed tight plug connector/mating component)

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 110114 on MQ Automation is $1,000.92. Order now.


About the product

Safety switch with guard locking and integrated evaluation electronics;Locking force up to 6500 N;Up to 20 switches in series;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;With 2 plug connectors M12;Multicode;Door monitoring output;Indication of the door position by LED;Wire front release (bowden), 3 m, automatic return;Approach direction A (delivery state)


Manufacturer warranty

110114 Euchner

$1,000.92

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$1,000.92

$1,000.92 each

Average response time: 11 minutes

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 110114 with other products

Weight

Series

Product Class

Mission time

Performance Level

PFHD

For the approval acc. to ...

Category

Repeat accuracy R

Switching delay from stat...

Discrepancy time

Turn-on time

Risk time according to EN...

Output voltage

Safety class

Off-state current Ir

Switching current

Extension of risk time ac...

Switching load

Type of output

Degree of contamination (...

Connecting cable

Solenoid operating voltag...

Current consumption

Utilization category acc....

EMC protection requiremen...

Connection rating

Solenoid duty cycle

Fusing

Operating voltage DC

Guard locking principle

Locking force FZh

Connection

Locking force Fmax

Switching frequency

Approach speed

Ready delay

Installation orientation

Housing material

Shock and vibration resis...

Degree of freedom X

Degree of freedom Y

Mechanical life

Degree of freedom Z

Ambient temperature

Degree of protection

Additional feature

Rated impulse withstand v...

Rated insulation voltage ...

Test pulses

Test-pulse interval

Actuating force

Extraction force

Overtravel

Retention force

B10D

Version

Operating current

Switching element

Detent mechanism

Operating voltage

Selected product

110114
0 in stock
110114
Euchner

110114 Euchner - Non-contact safety switch CET-AR-..., M12, with wire front release (bowden)

Weight4.0013853 lb

SeriesCET-AR

Product ClassSafety System

Mission time20 y

Performance LevelPL e

PFHD3.1 x 10⁻⁹

For the approval acc. to UL the following appliesOperation only with UL class...

Category4

Repeat accuracy R10 %

Switching delay from state changemax.400 ms

Discrepancy timemax.10 ms

Turn-on time400 ms

Risk time according to EN 60947-5-3max.400 ms

Output voltageUB-1,5V ... UB V DC

Safety classIII

Off-state current Irmax.0,25 mA

Switching current1 ... 200 mA

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Switching load24V DC, class 2 (For altern...

Type of output2 semiconductor outputs, p-s...

Degree of contamination (external, according to EN 60947-1)3

Connecting cable30V DC, 2A (For UL requirem...

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Current consumption80 mA

Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating11 W

Solenoid duty cycle100 %

Fusing0,25 ... 8 A

Operating voltage DC24 V DC -15% ... 10%

Guard locking principleClosed-circuit current princ...

Locking force FZh5000 N (FZH = FMAX/1.3)

Connection2 plug connectors M12, 5 and...

Locking force Fmax6500 N

Switching frequencymax.0,5 Hz

Approach speedmax.20 m/min

Ready delay10 s

Installation orientationAny (Preferably head downwa...

Housing materialStainless steel

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of freedom X±5 mm

Degree of freedom Y±5 mm

Mechanical life1 x 10⁶

Degree of freedom Z±4 mm

Ambient temperature-20 ... 55 °C

Degree of protectionIP67 (Screwed tight plug co...

Additional feature-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Test pulses-

Test-pulse interval-

Actuating force-

Extraction force-

Overtravel-

Retention force-

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

Mission time20 y

Performance LevelPL e

PFHD4.1 x 10 ⁻⁹

For the approval acc. to UL the following appliesOperation only with UL class...

Category4

Repeat accuracy R10 %

Switching delay from state change-

Discrepancy timemax.10 ms In acc. with EN ...

Turn-on timemax.400 ms

Risk time according to EN 60947-5-3max.260 ms

Output voltage0,8xUB ... UB V DC

Safety classIII

Off-state current Irmax.0,25 mA

Switching current1 ... 50 mA

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Switching load24V DC, class 2 (Alternativ...

Type of outputp-switching, short circuit-p...

Degree of contamination (external, according to EN 60947-1)3

Connecting cable-

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Current consumption40 mA

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating6 W

Solenoid duty cycle100 %

Fusing0,25 ... 8 A

Operating voltage DC24 V DC -15% ... 15% Rev...

Guard locking principleClosed-circuit current princ...

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Connection2 plug connectors M12, 5 and...

Locking force Fmax3900 N

Switching frequencymax.0,5 Hz

Approach speedmax.20 m/min

Ready delay8 s

Installation orientationAny

Housing materialDie-cast zinc

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of freedom X-

Degree of freedom Y-

Mechanical life1 x 10⁶

Degree of freedom Z-

Ambient temperature-20 ... +55 °C

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Additional featureEscape release actuated by p...

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.1,0 ms (Applies for a l...

Test-pulse intervalmin.140 ms

Actuating force10 N

Extraction force20 N

Overtravel5 mm

Retention force20 N

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

Mission time20 y

Performance LevelPL e

PFHD4.1 x 10 ⁻⁹

For the approval acc. to UL the following appliesOperation only with UL class...

Category4

Repeat accuracy R10 %

Switching delay from state change-

Discrepancy timemax.10 ms In acc. with EN ...

Turn-on timemax.400 ms

Risk time according to EN 60947-5-3-

Output voltage0 ... 1 V DC

Safety classIII

Off-state current Irmax.0,25 mA

Switching current1 ... 150 mA

Extension of risk time according to EN 60947-5-3 per device-

Switching load24V DC, class 2 (Alternativ...

Type of output2 semiconductor outputs, p-s...

Degree of contamination (external, according to EN 60947-1)3

Connecting cable-

Solenoid operating voltage DC-

Current consumption40 mA

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating1 W

Solenoid duty cycle-

Fusing0,25 ... 8 A

Operating voltage DC24 V DC -15% ... 15% Rev...

Guard locking principle-

Locking force FZh-

Connection2 plug connectors M12, 5-pin

Locking force Fmax-

Switching frequencymax.0,5 Hz

Approach speedmax.20 m/min

Ready delaymax.1 s

Installation orientationDoor hinge DIN right

Housing materialFiber glass reinforced therm...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of freedom X-

Degree of freedom Y-

Mechanical life1 x 10⁶

Degree of freedom Z-

Ambient temperature-20 ... +55 °C

Degree of protectionIP65 (Screwed tight plug co...

Additional feature-

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.0,3 ms (Applies for a l...

Test-pulse intervalmin.100 ms

Actuating force10 N

Extraction force20 N

Overtravel5 mm

Retention force-

B10D0,13 x 10⁶

VersionEmergency stop

Operating current1 ... 100 mA

Switching element2 pos. driven NC

Detent mechanismSnap-in bolt

Operating voltage5 ... 24 V

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

FAQ

What is the price of 110114?
The price of 110114 on MQ Automation is $1,000.92. Order now.

Out if stock but available for backorder.

110114 Euchner - Non-contact safety switch CET-AR-..., M12, with wire front release (bowden)

What can I help you find today?

Recommended parts