110104 Euchner Safety Proximity Sensors

110104 on MQ Automation
Euchner
  • 110104
  • 110104
  • 110104

Part#:110104

Alt. Part#:CET3-AR-CRA-CH-50X-SH-110104

Manufacturer:Euchner

Category:Safety Proximity Sensors

Product Lifecycle:Active

Only 1 left in stock. Order Now!

Mar 15, 2025

Product description

110104 Euchner - Non-contact safety switch CET-AR-..., RC18

Product Details

  • Weight
    2.8549829 lb
  • Series
    CET-AR
  • Product Class
    Safety System
  • Performance Level
    PL e
  • Mission time
    20 y
  • Category
    4
  • PFHD
    3.1 x 10⁻⁹
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures see operating instructions
  • Discrepancy time
    max.10 ms
  • Switching delay from state change
    max.400 ms
  • Turn-on time
    400 ms
  • Repeat accuracy R
    10 %
  • Output voltage
    0 ... 1 V DC
  • Off-state current Ir
    max.0,25 mA
  • Risk time according to EN 60947-5-3
    max.400 ms
  • Switching current
    1 ... 200 mA
  • Safety class
    III
  • Type of output
    2 semiconductor outputs, p-switching, short circuit-proof
  • Extension of risk time according to EN 60947-5-3 per device
    max.5 ms
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Connecting cable
    30V DC, 2A (For UL requirement UL category code (CYJV2/CYJV8) or (CYJV/CYJV7))
  • Switching load
    24V DC, class 2 (For alternatives see operating instructions)
  • Solenoid duty cycle
    100 %
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Connection rating
    11 W
  • Fusing
    0,5 ... 8 A
  • Current consumption
    80 mA
  • Solenoid operating voltage DC
    24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Operating voltage DC
    24 V DC -15% ... 10%
  • Locking force FZh
    5000 N FZH = FMAX/1.3
  • Utilization category acc. to EN 60947-5-2
    24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
  • Locking force Fmax
    6500 N
  • Installation orientation
    Any (Preferably head downward)
  • Approach speed
    max.20 m/min
  • Connection
    1 plug connector M23, 19-pin, RC18
  • Switching frequency
    max.0,5 Hz
  • Ready delay
    10 s
  • Degree of freedom Y
    ±5 mm
  • Guard locking principle
    Closed-circuit current principle
  • Shock and vibration resistance
    In acc. with EN 60947-5-3
  • Degree of freedom X
    ±5 mm
  • Ambient temperature
    -20 ... 55 °C
  • Weight
    1 kg
  • Degree of protection
    IP65/IP67 (Screwed tight plug connector/mating component)
  • Housing material
    Stainless steel
  • Mechanical life
    1 x 10⁶
  • Degree of freedom Z
    ±4 mm

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 110104 on MQ Automation is $872.40. Order now.


About the product

Safety switch with guard locking and integrated evaluation electronics;Locking force up to 6500 N;Up to 20 switches in series;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;With plug connector M23 (RC18);Multicode;Door monitoring output;Approach direction A (delivery state)


This item can ship in 3-5 days!

Manufacturer warranty

110104 Euchner

$872.40

Your price can be lower.
Log in or Create account to check your discount

Stock:

1

Select Qty:

$872.40

$872.40 each

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 110104 with other products

Weight

Series

Product Class

Performance Level

Mission time

Category

PFHD

For the approval acc. to ...

Discrepancy time

Switching delay from stat...

Turn-on time

Repeat accuracy R

Output voltage

Off-state current Ir

Risk time according to EN...

Switching current

Safety class

Type of output

Extension of risk time ac...

Degree of contamination (...

Connecting cable

Switching load

Solenoid duty cycle

EMC protection requiremen...

Connection rating

Fusing

Current consumption

Solenoid operating voltag...

Operating voltage DC

Locking force FZh

Utilization category acc....

Locking force Fmax

Installation orientation

Approach speed

Connection

Switching frequency

Ready delay

Degree of freedom Y

Guard locking principle

Shock and vibration resis...

Degree of freedom X

Ambient temperature

Degree of protection

Housing material

Mechanical life

Degree of freedom Z

Additional feature

Rated impulse withstand v...

Rated insulation voltage ...

Test pulses

Test-pulse interval

Actuating force

Extraction force

Overtravel

Retention force

B10D

Version

Operating current

Switching element

Detent mechanism

Operating voltage

Selected product

110104
1 in stock
110104
Euchner

110104 Euchner - Non-contact safety switch CET-AR-..., RC18

Weight2.8549829 lb

SeriesCET-AR

Product ClassSafety System

Performance LevelPL e

Mission time20 y

Category4

PFHD3.1 x 10⁻⁹

For the approval acc. to UL the following appliesOperation only with UL class...

Discrepancy timemax.10 ms

Switching delay from state changemax.400 ms

Turn-on time400 ms

Repeat accuracy R10 %

Output voltage0 ... 1 V DC

Off-state current Irmax.0,25 mA

Risk time according to EN 60947-5-3max.400 ms

Switching current1 ... 200 mA

Safety classIII

Type of output2 semiconductor outputs, p-s...

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Degree of contamination (external, according to EN 60947-1)3

Connecting cable30V DC, 2A (For UL requirem...

Switching load24V DC, class 2 (For altern...

Solenoid duty cycle100 %

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating11 W

Fusing0,5 ... 8 A

Current consumption80 mA

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Operating voltage DC24 V DC -15% ... 10%

Locking force FZh5000 N FZH = FMAX/1.3

Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...

Locking force Fmax6500 N

Installation orientationAny (Preferably head downwa...

Approach speedmax.20 m/min

Connection1 plug connector M23, 19-pin...

Switching frequencymax.0,5 Hz

Ready delay10 s

Degree of freedom Y±5 mm

Guard locking principleClosed-circuit current princ...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of freedom X±5 mm

Ambient temperature-20 ... 55 °C

Degree of protectionIP65/IP67 (Screwed tight pl...

Housing materialStainless steel

Mechanical life1 x 10⁶

Degree of freedom Z±4 mm

Additional feature-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Test pulses-

Test-pulse interval-

Actuating force-

Extraction force-

Overtravel-

Retention force-

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

Performance LevelPL e

Mission time20 y

Category4

PFHD4.1 x 10 ⁻⁹

For the approval acc. to UL the following appliesOperation only with UL class...

Discrepancy timemax.10 ms In acc. with EN ...

Switching delay from state change-

Turn-on timemax.400 ms

Repeat accuracy R10 %

Output voltage0,8xUB ... UB V DC

Off-state current Irmax.0,25 mA

Risk time according to EN 60947-5-3max.260 ms

Switching current1 ... 50 mA

Safety classIII

Type of outputp-switching, short circuit-p...

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Degree of contamination (external, according to EN 60947-1)3

Connecting cable-

Switching load24V DC, class 2 (Alternativ...

Solenoid duty cycle100 %

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating6 W

Fusing0,25 ... 8 A

Current consumption40 mA

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Operating voltage DC24 V DC -15% ... 15% Rev...

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Locking force Fmax3900 N

Installation orientationAny

Approach speedmax.20 m/min

Connection2 plug connectors M12, 5 and...

Switching frequencymax.0,5 Hz

Ready delay8 s

Degree of freedom Y-

Guard locking principleClosed-circuit current princ...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of freedom X-

Ambient temperature-20 ... +55 °C

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Housing materialDie-cast zinc

Mechanical life1 x 10⁶

Degree of freedom Z-

Additional featureEscape release actuated by p...

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.1,0 ms (Applies for a l...

Test-pulse intervalmin.140 ms

Actuating force10 N

Extraction force20 N

Overtravel5 mm

Retention force20 N

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

Performance LevelPL e

Mission time20 y

Category4

PFHD4.1 x 10 ⁻⁹

For the approval acc. to UL the following appliesOperation only with UL class...

Discrepancy timemax.10 ms In acc. with EN ...

Switching delay from state change-

Turn-on timemax.400 ms

Repeat accuracy R10 %

Output voltage0 ... 1 V DC

Off-state current Irmax.0,25 mA

Risk time according to EN 60947-5-3-

Switching current1 ... 150 mA

Safety classIII

Type of output2 semiconductor outputs, p-s...

Extension of risk time according to EN 60947-5-3 per device-

Degree of contamination (external, according to EN 60947-1)3

Connecting cable-

Switching load24V DC, class 2 (Alternativ...

Solenoid duty cycle-

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating1 W

Fusing0,25 ... 8 A

Current consumption40 mA

Solenoid operating voltage DC-

Operating voltage DC24 V DC -15% ... 15% Rev...

Locking force FZh-

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Locking force Fmax-

Installation orientationDoor hinge DIN right

Approach speedmax.20 m/min

Connection2 plug connectors M12, 5-pin

Switching frequencymax.0,5 Hz

Ready delaymax.1 s

Degree of freedom Y-

Guard locking principle-

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of freedom X-

Ambient temperature-20 ... +55 °C

Degree of protectionIP65 (Screwed tight plug co...

Housing materialFiber glass reinforced therm...

Mechanical life1 x 10⁶

Degree of freedom Z-

Additional feature-

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.0,3 ms (Applies for a l...

Test-pulse intervalmin.100 ms

Actuating force10 N

Extraction force20 N

Overtravel5 mm

Retention force-

B10D0,13 x 10⁶

VersionEmergency stop

Operating current1 ... 100 mA

Switching element2 pos. driven NC

Detent mechanismSnap-in bolt

Operating voltage5 ... 24 V

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

FAQ

What is the price of 110104?
The price of 110104 on MQ Automation is $872.40. Order now.

Out if stock but available for backorder.

110104 Euchner - Non-contact safety switch CET-AR-..., RC18

What can I help you find today?

Recommended parts