105764 Euchner Safety Proximity Sensors
Part#:105764
Alt. Part#:CET1-AR-CRA-CH-50S-SG-105764
Manufacturer:Euchner
Category:Safety Proximity Sensors
Product Lifecycle:Active
Product description
105764 Euchner - Non-contact safety switch CET-AR-..., M12
Product Details
- Weight 2.5022437 lb
- Series CET-AR
- Product Class Safety System
- Mission time 20 y
- PFHD 3.1 x 10⁻⁹
- Performance Level PL e
- Category 4
- For the approval acc. to UL the following applies Operation only with UL class 2 power supply, or equivalent measures see operating instructions
- Discrepancy time max.10 ms
- Repeat accuracy R 10 %
- Turn-on time 400 ms
- Risk time according to EN 60947-5-3 max.400 ms
- Output current 1 ... 200 mA
- Off-state current Ir max.0,25 mA
- Type of output Semiconductor outputs, p-switching, short circuit-proof
- Output voltage UB-1,5V ... UB V DC (Values at a switching current of 50mA without taking into account the cable lengths)
- Extension of risk time according to EN 60947-5-3 per device max.5 ms
- Input voltage 0 ... 1 V DC Feedback loop Y
- Safety class III
- Degree of contamination (external, according to EN 60947-1) 3
- Solenoid duty cycle 100 %
- Switching load 24V DC, class 2 (For alternatives see operating instructions)
- EMC protection requirements In acc. with EN IEC 60947-5-3
- Connection rating 11 W
- Fusing 0,25 ... 8 A
- Utilization category acc. to EN 60947-5-2 24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
- Solenoid operating voltage DC 24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
- Locking force FZh 5000 N
- Current consumption 80 mA
- Operating voltage DC 24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
- Locking force Fmax 6500 N
- Guard locking principle Closed-circuit current principle
- Approach speed max.20 m/min
- Connection 2 plug connectors M12, 5 and 8-pin
- Switching frequency max.0,5 Hz
- Ready delay 10 s
- Installation orientation Any (Preferably head downward)
- Weight 1 kg
- Housing material Stainless steel
- Degree of freedom Z ±4 mm
- Degree of freedom Y ±5 mm
- Mechanical life 1 x 10⁶
- Degree of protection IP67 (Screwed tight plug connector/mating component)
- Ambient temperature -20 ... 55 °C
- Degree of freedom X ±5 mm
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 105764 on MQ Automation is $845.57. Order now.
About the product
Safety switch with guard locking and integrated evaluation electronics;Locking force up to 6500 N;Up to 20 switches in series;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;With 2 plug connectors M12;Multicode;Feedback loop;Approach direction A (delivery state)
Manufacturer warranty
105764 Euchner
$845.57
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$845.57
$845.57 each
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 105764 with other products
Weight
Series
Product Class
Mission time
PFHD
Performance Level
Category
For the approval acc. to ...
Discrepancy time
Repeat accuracy R
Turn-on time
Risk time according to EN...
Output current
Off-state current Ir
Type of output
Output voltage
Extension of risk time ac...
Input voltage
Safety class
Degree of contamination (...
Solenoid duty cycle
Switching load
EMC protection requiremen...
Connection rating
Fusing
Utilization category acc....
Solenoid operating voltag...
Locking force FZh
Current consumption
Operating voltage DC
Locking force Fmax
Guard locking principle
Approach speed
Connection
Switching frequency
Ready delay
Installation orientation
Housing material
Degree of freedom Z
Degree of freedom Y
Mechanical life
Degree of protection
Ambient temperature
Degree of freedom X
Additional feature
Switching current
Rated impulse withstand v...
Rated insulation voltage ...
Test pulses
Test-pulse interval
Actuating force
Extraction force
Overtravel
Retention force
Shock and vibration resis...
B10D
Version
Operating current
Switching element
Detent mechanism
Operating voltage
Selected product
Weight2.5022437 lb
SeriesCET-AR
Product ClassSafety System
Mission time20 y
PFHD3.1 x 10⁻⁹
Performance LevelPL e
Category4
For the approval acc. to UL the following appliesOperation only with UL class...
Discrepancy timemax.10 ms
Repeat accuracy R10 %
Turn-on time400 ms
Risk time according to EN 60947-5-3max.400 ms
Output current1 ... 200 mA
Off-state current Irmax.0,25 mA
Type of outputSemiconductor outputs, p-swi...
Output voltageUB-1,5V ... UB V DC (Values...
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Input voltage0 ... 1 V DC Feedback loop...
Safety classIII
Degree of contamination (external, according to EN 60947-1)3
Solenoid duty cycle100 %
Switching load24V DC, class 2 (For altern...
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Connection rating11 W
Fusing0,25 ... 8 A
Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...
Solenoid operating voltage DC24 V DC -15% ... +10% Re...
Locking force FZh5000 N
Current consumption80 mA
Operating voltage DC24 V DC -15% ... 15% Rev...
Locking force Fmax6500 N
Guard locking principleClosed-circuit current princ...
Approach speedmax.20 m/min
Connection2 plug connectors M12, 5 and...
Switching frequencymax.0,5 Hz
Ready delay10 s
Installation orientationAny (Preferably head downwa...
Housing materialStainless steel
Degree of freedom Z±4 mm
Degree of freedom Y±5 mm
Mechanical life1 x 10⁶
Degree of protectionIP67 (Screwed tight plug co...
Ambient temperature-20 ... 55 °C
Degree of freedom X±5 mm
Additional feature-
Switching current-
Rated impulse withstand voltage Uimp-
Rated insulation voltage Ui-
Test pulses-
Test-pulse interval-
Actuating force-
Extraction force-
Overtravel-
Retention force-
Shock and vibration resistance-
B10D-
Version-
Operating current-
Switching element-
Detent mechanism-
Operating voltage-
122813
Euchner
122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release
Weight1.763696 lb
SeriesCTP-AR
Product ClassSafety System
Mission time20 y
PFHD4.1 x 10 ⁻⁹
Performance LevelPL e
Category4
For the approval acc. to UL the following appliesOperation only with UL class...
Discrepancy timemax.10 ms In acc. with EN ...
Repeat accuracy R10 %
Turn-on timemax.400 ms
Risk time according to EN 60947-5-3max.260 ms
Output current-
Off-state current Irmax.0,25 mA
Type of outputp-switching, short circuit-p...
Output voltage0,8xUB ... UB V DC
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Input voltage-
Safety classIII
Degree of contamination (external, according to EN 60947-1)3
Solenoid duty cycle100 %
Switching load24V DC, class 2 (Alternativ...
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Connection rating6 W
Fusing0,25 ... 8 A
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Solenoid operating voltage DC24 V DC -15% ... +10% Re...
Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...
Current consumption40 mA
Operating voltage DC24 V DC -15% ... 15% Rev...
Locking force Fmax3900 N
Guard locking principleClosed-circuit current princ...
Approach speedmax.20 m/min
Connection2 plug connectors M12, 5 and...
Switching frequencymax.0,5 Hz
Ready delay8 s
Installation orientationAny
Housing materialDie-cast zinc
Degree of freedom Z-
Degree of freedom Y-
Mechanical life1 x 10⁶
Degree of protectionIP67/IP69/IP69K (Screwed ti...
Ambient temperature-20 ... +55 °C
Degree of freedom X-
Additional featureEscape release actuated by p...
Switching current1 ... 50 mA
Rated impulse withstand voltage Uimp0,5 kV
Rated insulation voltage Ui50 V
Test pulsesmax.1,0 ms (Applies for a l...
Test-pulse intervalmin.140 ms
Actuating force10 N
Extraction force20 N
Overtravel5 mm
Retention force20 N
Shock and vibration resistanceIn acc. with EN 60947-5-3
B10D-
Version-
Operating current-
Switching element-
Detent mechanism-
Operating voltage-
Weight3.968316 lb
SeriesMGBS-P-I-AP
Product ClassSafety System
Mission time20 y
PFHD4.1 x 10 ⁻⁹
Performance LevelPL e
Category4
For the approval acc. to UL the following appliesOperation only with UL class...
Discrepancy timemax.10 ms In acc. with EN ...
Repeat accuracy R10 %
Turn-on timemax.400 ms
Risk time according to EN 60947-5-3-
Output current-
Off-state current Irmax.0,25 mA
Type of output2 semiconductor outputs, p-s...
Output voltage0 ... 1 V DC
Extension of risk time according to EN 60947-5-3 per device-
Input voltage-
Safety classIII
Degree of contamination (external, according to EN 60947-1)3
Solenoid duty cycle-
Switching load24V DC, class 2 (Alternativ...
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Connection rating1 W
Fusing0,25 ... 8 A
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Solenoid operating voltage DC-
Locking force FZh-
Current consumption40 mA
Operating voltage DC24 V DC -15% ... 15% Rev...
Locking force Fmax-
Guard locking principle-
Approach speedmax.20 m/min
Connection2 plug connectors M12, 5-pin
Switching frequencymax.0,5 Hz
Ready delaymax.1 s
Installation orientationDoor hinge DIN right
Housing materialFiber glass reinforced therm...
Degree of freedom Z-
Degree of freedom Y-
Mechanical life1 x 10⁶
Degree of protectionIP65 (Screwed tight plug co...
Ambient temperature-20 ... +55 °C
Degree of freedom X-
Additional feature-
Switching current1 ... 150 mA
Rated impulse withstand voltage Uimp0,5 kV
Rated insulation voltage Ui50 V
Test pulsesmax.0,3 ms (Applies for a l...
Test-pulse intervalmin.100 ms
Actuating force10 N
Extraction force20 N
Overtravel5 mm
Retention force-
Shock and vibration resistanceIn acc. with EN 60947-5-3
B10D0,13 x 10⁶
VersionEmergency stop
Operating current1 ... 100 mA
Switching element2 pos. driven NC
Detent mechanismSnap-in bolt
Operating voltage5 ... 24 V
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 105764?
The price of 105764 on MQ Automation is $845.57. Order now.
Out if stock but available for backorder.
105764 Euchner - Non-contact safety switch CET-AR-..., M12
Similar products from: Safety Proximity Sensors
What can I help you find today?
