105763 Euchner Safety Proximity Sensors

105763 on MQ Automation
Euchner
  • 105763
  • 105763
  • 105763

Part#:105763

Alt. Part#:CET1-AR-CRA-CH-50X-SG-105763

Manufacturer:Euchner

Category:Safety Proximity Sensors

Product Lifecycle:Active

11 in stock

Mar 15, 2025

Product description

105763 Euchner - Non-contact safety switch CET-AR-..., M12

Product Details

  • Weight
    2.7667981 lb
  • Series
    CET-AR
  • Product Class
    Safety System
  • PFHD
    3.1 x 10⁻⁹
  • Mission time
    20 y
  • Performance Level
    PL e
  • Repeat accuracy R
    10 %
  • Discrepancy time
    max.10 ms
  • Category
    4
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures see operating instructions
  • Turn-on time
    400 ms
  • Risk time according to EN 60947-5-3
    max.400 ms
  • Off-state current Ir
    max.0,25 mA
  • Output current
    1 ... 200 mA
  • Output voltage
    UB-1,5V ... UB V DC (Values at a switching current of 50mA without taking into account the cable lengths)
  • Utilization category acc. to EN 60947-5-2
    24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
  • Type of output
    Semiconductor outputs, p-switching, short circuit-proof
  • Extension of risk time according to EN 60947-5-3 per device
    max.5 ms
  • Switching load
    24V DC, class 2 (For alternatives see operating instructions)
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Safety class
    III
  • Locking force Fmax
    6500 N
  • Solenoid duty cycle
    100 %
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Connection rating
    11 W
  • Fusing
    0,25 ... 8 A
  • Solenoid operating voltage DC
    24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Current consumption
    80 mA
  • Operating voltage DC
    24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Locking force FZh
    5000 N
  • Guard locking principle
    Closed-circuit current principle
  • Connection
    2 plug connectors M12, 5 and 8-pin
  • Approach speed
    max.20 m/min
  • Switching frequency
    max.0,5 Hz
  • Ambient temperature
    -20 ... 55 °C
  • Ready delay
    10 s
  • Degree of freedom Z
    ±4 mm
  • Degree of freedom X
    ±5 mm
  • Degree of protection
    IP67 (Screwed tight plug connector/mating component)
  • Degree of freedom Y
    ±5 mm
  • Weight
    1 kg
  • Housing material
    Stainless steel
  • Installation orientation
    Any (Preferably head downward)
  • Mechanical life
    1 x 10⁶

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 105763 on MQ Automation is $805.11. Order now.


About the product

Safety switch with guard locking and integrated evaluation electronics;Locking force up to 6500 N;Up to 20 switches in series;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;With 2 plug connectors M12;Multicode;Approach direction A (delivery state)


This item can ship in 3-5 days!

Manufacturer warranty

105763 Euchner

$805.11

Your price can be lower.
Log in or Create account to check your discount

Stock:

11

Select Qty:

$805.11

$805.11 each

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 105763 with other products

Weight

Series

Product Class

PFHD

Mission time

Performance Level

Repeat accuracy R

Discrepancy time

Category

For the approval acc. to ...

Turn-on time

Risk time according to EN...

Off-state current Ir

Output current

Output voltage

Utilization category acc....

Type of output

Extension of risk time ac...

Switching load

Degree of contamination (...

Safety class

Locking force Fmax

Solenoid duty cycle

EMC protection requiremen...

Connection rating

Fusing

Solenoid operating voltag...

Current consumption

Operating voltage DC

Locking force FZh

Guard locking principle

Connection

Approach speed

Switching frequency

Ambient temperature

Ready delay

Degree of freedom Z

Degree of freedom X

Degree of protection

Degree of freedom Y

Housing material

Installation orientation

Mechanical life

Additional feature

Switching current

Rated impulse withstand v...

Rated insulation voltage ...

Test pulses

Test-pulse interval

Actuating force

Extraction force

Overtravel

Retention force

Shock and vibration resis...

B10D

Version

Operating current

Switching element

Detent mechanism

Operating voltage

Selected product

105763
11 in stock
105763
Euchner

105763 Euchner - Non-contact safety switch CET-AR-..., M12

Weight2.7667981 lb

SeriesCET-AR

Product ClassSafety System

PFHD3.1 x 10⁻⁹

Mission time20 y

Performance LevelPL e

Repeat accuracy R10 %

Discrepancy timemax.10 ms

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Turn-on time400 ms

Risk time according to EN 60947-5-3max.400 ms

Off-state current Irmax.0,25 mA

Output current1 ... 200 mA

Output voltageUB-1,5V ... UB V DC (Values...

Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...

Type of outputSemiconductor outputs, p-swi...

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Switching load24V DC, class 2 (For altern...

Degree of contamination (external, according to EN 60947-1)3

Safety classIII

Locking force Fmax6500 N

Solenoid duty cycle100 %

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating11 W

Fusing0,25 ... 8 A

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Current consumption80 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Locking force FZh5000 N

Guard locking principleClosed-circuit current princ...

Connection2 plug connectors M12, 5 and...

Approach speedmax.20 m/min

Switching frequencymax.0,5 Hz

Ambient temperature-20 ... 55 °C

Ready delay10 s

Degree of freedom Z±4 mm

Degree of freedom X±5 mm

Degree of protectionIP67 (Screwed tight plug co...

Degree of freedom Y±5 mm

Housing materialStainless steel

Installation orientationAny (Preferably head downwa...

Mechanical life1 x 10⁶

Additional feature-

Switching current-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Test pulses-

Test-pulse interval-

Actuating force-

Extraction force-

Overtravel-

Retention force-

Shock and vibration resistance-

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

PFHD4.1 x 10 ⁻⁹

Mission time20 y

Performance LevelPL e

Repeat accuracy R10 %

Discrepancy timemax.10 ms In acc. with EN ...

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Turn-on timemax.400 ms

Risk time according to EN 60947-5-3max.260 ms

Off-state current Irmax.0,25 mA

Output current-

Output voltage0,8xUB ... UB V DC

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Type of outputp-switching, short circuit-p...

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Switching load24V DC, class 2 (Alternativ...

Degree of contamination (external, according to EN 60947-1)3

Safety classIII

Locking force Fmax3900 N

Solenoid duty cycle100 %

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating6 W

Fusing0,25 ... 8 A

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Guard locking principleClosed-circuit current princ...

Connection2 plug connectors M12, 5 and...

Approach speedmax.20 m/min

Switching frequencymax.0,5 Hz

Ambient temperature-20 ... +55 °C

Ready delay8 s

Degree of freedom Z-

Degree of freedom X-

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Degree of freedom Y-

Housing materialDie-cast zinc

Installation orientationAny

Mechanical life1 x 10⁶

Additional featureEscape release actuated by p...

Switching current1 ... 50 mA

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.1,0 ms (Applies for a l...

Test-pulse intervalmin.140 ms

Actuating force10 N

Extraction force20 N

Overtravel5 mm

Retention force20 N

Shock and vibration resistanceIn acc. with EN 60947-5-3

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

PFHD4.1 x 10 ⁻⁹

Mission time20 y

Performance LevelPL e

Repeat accuracy R10 %

Discrepancy timemax.10 ms In acc. with EN ...

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Turn-on timemax.400 ms

Risk time according to EN 60947-5-3-

Off-state current Irmax.0,25 mA

Output current-

Output voltage0 ... 1 V DC

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Type of output2 semiconductor outputs, p-s...

Extension of risk time according to EN 60947-5-3 per device-

Switching load24V DC, class 2 (Alternativ...

Degree of contamination (external, according to EN 60947-1)3

Safety classIII

Locking force Fmax-

Solenoid duty cycle-

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating1 W

Fusing0,25 ... 8 A

Solenoid operating voltage DC-

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Locking force FZh-

Guard locking principle-

Connection2 plug connectors M12, 5-pin

Approach speedmax.20 m/min

Switching frequencymax.0,5 Hz

Ambient temperature-20 ... +55 °C

Ready delaymax.1 s

Degree of freedom Z-

Degree of freedom X-

Degree of protectionIP65 (Screwed tight plug co...

Degree of freedom Y-

Housing materialFiber glass reinforced therm...

Installation orientationDoor hinge DIN right

Mechanical life1 x 10⁶

Additional feature-

Switching current1 ... 150 mA

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.0,3 ms (Applies for a l...

Test-pulse intervalmin.100 ms

Actuating force10 N

Extraction force20 N

Overtravel5 mm

Retention force-

Shock and vibration resistanceIn acc. with EN 60947-5-3

B10D0,13 x 10⁶

VersionEmergency stop

Operating current1 ... 100 mA

Switching element2 pos. driven NC

Detent mechanismSnap-in bolt

Operating voltage5 ... 24 V

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

Relevant products

FAQ

What is the price of 105763?
The price of 105763 on MQ Automation is $805.11. Order now.

Out if stock but available for backorder.

105763 Euchner - Non-contact safety switch CET-AR-..., M12

What can I help you find today?

Recommended parts