770-843/011-000/060-000 WAGO Electrical Connector Accessories

WAGO 770-843/011-000/060-000 is an automation part with a nominal voltage of 250V and a rated impulse voltage of 4kV according to IEC/EN 60664-1 standards. It has a rated current of 25A and falls under the overvoltage category III with a pollution degree of 3. For the US market, it can also be used for current interruption in specific applications below 16A and up to 600V, as per UL 1977, with a rated voltage of 600V and a rated current of 23A. The part features approximately 1mΩ of contact resistance and about 0.25mΩ contact transition plug/socket. It has three total potentials, one level, and a three-pole connection. The pin spacing is 10mm, with dimensions of 27mm in width, 18.1mm in height, 14.6mm height from the surface, and 26mm in depth. The solder pin length is 3.5mm, with dimensions of 1 x 0.8mm and a drilled hole diameter of 1.5mm (with a tolerance of -0.1...+0.1mm). Designed for control technology, it features B coding, variable coding, and is marked with L PE N for potential marking. The mating force ranges from approximately 20 to 70N, with a locked retention force of over 80N and an unmating force of about 20 to 70N, depending on the pole number, for up to 200 mating cycles without resistive load. The design is angled, with a female connector/socket for PCB, including mismating protection and a locking lever for secure connection. The PCB contact is THT with two in-line solder pins per pole. The part is gray, made from Polyamide (PA66) with a V0 flammability class, and uses Chrome-Nickel spring steel for the clamping spring and tin-plated copper or copper alloy for contacts. It weighs 6.4g, has a fire load of 0.131MJ, and can operate between -35 and +85°C, with insulating parts rated for ≤ 105°C. Packaged in boxes of 100 pieces, it is RoHS compliant without exemptions, has a GTIN of 4050821553205, and a customs tariff number of 85366990990, with its country of origin being Poland.