256-505 WAGO Terminal Blocks

WAGO 256-505 is an automation part with a short circuit breaking rating and electrical data ratings per IEC/EN 60664-1, including a nominal voltage (III/3) of 320V, rated impulse voltage (III/3) of 4kV, rated voltage (III/2) of 320V, rated impulse voltage (III/2) of 4kV, nominal voltage (II/2) of 630V, rated surge voltage (II/2) of 4kV, and a rated current of 24A. It has UL 1059 approval with rated voltages of 300V and rated currents of 15A for Use Group B and 10A for Use Group D, as well as CSA approval with similar ratings for Use Groups B and D. The part features 5 connection points, a total number of potentials of 5, one connection type, and one level. The connection technology is CAGE CLAMP with push-button actuation, accommodating solid and fine-stranded conductors ranging from 0.08 to 2.5mm2 / 28 to 12 AWG, and fine-stranded conductors with insulated or uninsulated ferrules from 0.25 to 1.5mm2. The strip length is 5 to 6mm / 0.2 to 0.24", and the conductor connection direction to PCB is 45°. It has a pole number of 5, pin spacing of 7.5/7.62mm / 0.295/0.3", dimensions of 40.4mm in width, 22.2mm in height, 18.2mm height from the surface, and 17.6mm in depth. The solder pin length is 4mm with dimensions of 0.7 x 0.7mm, and the drilled hole diameter with tolerance is 1.1 (+0.1)mm. It features a THT PCB contact, in-line solder pin arrangement, and two solder pins per potential. The part is gray, made from Polyamide (PA66) with a flammability class of UL94 V0, and uses Chrome-Nickel spring steel (CrNi) for the clamping spring and Electrolytic Copper (ECu) with tin plating for contacts. It has a fire load of 0.114MJ, weighs 6g, and operates within a temperature range of -60 to +105°C. It is RoHS compliant without exemption, packaged in boxes with a PU (SPU) of 120 (30) pcs, and has a GTIN of 4044918808446 with a customs tariff number of 85369010000. The country of origin is CH.