235-766 WAGO Industrial Automation Components

WAGO 235-766 is a printed circuit connector with a short circuit breaking rating as per IEC/EN 60664-1. It supports a nominal voltage of 630V (III/3), 1000V (III/2), and 1000V (II/2) with a rated impulse voltage of 8kV for both III/3 and III/2 overvoltage categories, and a rated surge voltage of 8kV for II/2. The rated current is 24A according to IEC/EN standards. Under UL 1059 approvals, it has a rated voltage of 300V and a rated current of 10A for both Use Groups B and D, while CSA ratings for Use Group B are 300V and 15A. This connector features a single connection point, one level, and utilizes PUSH WIRE connection technology for solid conductors ranging from 0.5 to 2.5mm2 / 20 to 14 AWG, and fine-stranded conductors from 0.25 to 1.5mm2, with a strip length of 9 to 10mm / 0.35 to 0.39". The pole number is 1, with a pin spacing of 10/10.16mm / 0.394/0.4", and dimensions of 11.5mm in width, 12.8mm in height, 9.2mm height from the surface, and 12.5mm in depth. The solder pin length is 3.6mm, with dimensions of 0.8 x 0.4mm, and a drilled hole diameter with tolerance of 1 (+0.1)mm. It features THT PCB contact, in-line solder pin arrangement, and two solder pins per potential. The connector is orange, made from Polyamide (PA66) with a flammability class of UL94 V0, and uses Chrome-Nickel spring steel (CrNi) for the clamping spring, with electrolytic copper (ECu) contacts plated with tin. It has a fire load of 0.019MJ and weighs 1g. The operating temperature range is -60 to +105°C. Packaged in boxes of 400 pieces, it is RoHS compliant without exemption, has a GTIN of 4044918832847, and a customs tariff number of 85369010000, with its country of origin being CN.