TJ 452-02Y Schmersal Electronic Components

Product Details

• Switching element
  Opener (NC)
• Roller material
  Plastic
• Thermal test current
  16 A
• Switching principle
  Creep circuit element
• Note (Switching element)
  with double break
• Material of the contacts, electrical
  Silver
• Rated insulation voltage Ui
  400 V
• Rated impulse withstand voltage Uimp
  6 kV
• Ambient temperature, maximum
  +90 °C
• Utilisation category AC-15
  4 A
• Ambient temperature, minimum
  -30 °C
• Degree of protection
  IP65 to EN 60529
• Diameter of Castor
  36 mm
• Width of Castor
  9 mm
• Enclosure coating material
  painted
• Height of sensor
  207 mm
• Width of sensor
  118 mm
• Wire cross-section
  13 AWG
• Note (Cable section)
  All indications about the cable section are including the conductor ferrules.
• Length of sensor
  64 mm
Standards
EN 60947-5-1
Enclosure material
Grey cast iron, galvanised
Cable section, minimum
1.5 mm²
Cable section, maximum
2.5 mm²
Terminal Connector
Screw connection
Number of openers
2
Note (Actuating speed)
Actuating speed with vertical actuating angle to switch axis
Actuating speed, minimum
1 mm/min
Actuating speed, maximum
0.5 m/s
Contact opening
2 x 6 mm
Actuating angle, from right of switch axis
30 °
Mechanical life, minimum
10,000,000 Operations
Actuating angle, from left of switch axis
45 °
Actuating element
Offset roller lever
Gross weight
1,947 g
Number of shutters
2
Active principle
mechanical
Slide form
Castor

Related documents TJ 452-02Y Specs