SRB220XV2 / V.2 Schmersal Electronic Components

Product Details

• Electrical power consumption
  5.4 VA
• EMC rating
  EMC-Directive
• Conduction resistance, maximum
  40 Ω
• Switching capacity, minimum
  10 mA
• Current, Utilisation category, AC15
  3 A
• Pull-in delay at RESET, typically
  20 ms
• Drop-out delay in case of power failure, typically
  80 ms
• Rated control voltage at AC 60 Hz, maximum
  26.4 VAC
• Voltage, Utilisation category DC12
  24 VDC
• Current, Utilisation category DC12
  0.1 A
• Voltage, Utilisation category, AC15
  230 VAC
• Current, Utilisation category, DC13
  2 A
• Switching capacity, maximum
  6 A
• Voltage, Utilisation category, DC13
  24 VDC
• Pull-in delay at automatic start, maximum, typically
  250 ms
• Drop-out delay in case of emergency, typically
  30 ms
• Note (Contact resistance)
  in new state
• Contact resistance, maximum
  0.1 Ω
• Rated AC voltage for controls, 60 Hz, minimum
  20.4 VAC
• Rated control voltage at DC, maximum
  28.8 VDC
Rated AC voltage for controls at DC minimum
20.4 VDC
Rated control voltage at AC 50 Hz, maximum
26.4 VAC
Rated AC voltage for controls, 50 Hz, minimum
20.4 VAC
Rated operating voltage
24 VAC -15% / +10%, 24 VDC -15% / +20%, residual ripple max. 10 %
Degree of pollution to VDE 0110
2
Frequency range
50 Hz, 60 Hz
Rated impulse withstand voltage Uimp
4 kV
Overvoltage category
III
Resistance to vibrations to EN 60068-2-6
10...55 Hz, Amplitude 0.35 mm, ± 15 %
Restistance to shock
30 g / 11 ms
Storage and transport temperature, maximum
+85 °C
Storage and transport temperature, minimum
-40 °C
Ambient temperature, maximum
+60 °C
Degree of protection of clips or terminals
IP20
Ambient temperature, minimum
-25 °C
Degree of protection of the mounting space
IP54
Degree of protection of the enclosure
IP40
Depth
121 mm
Height
100 mm
Width
45 mm
Tightening torque of Clips
0.6 Nm
Cable section, maximum
2.5 mm²
Terminal designations
IEC/EN 60947-1
Terminal Connector
Screw connection, rigid or flexible
Cable section, minimum
0.25 mm²
Mounting
Snaps onto standard DIN rail to EN 60715
Mechanical life, minimum
10,000,000 Operations
Number of Safety contacts, STOP 1
2
Number of Safety contacts, STOP 0
3
Number of safety contacts
4
Number of openers
2
Number of LEDs
5
Integral System Diagnostics, status
Yes
Earth connection detection
Yes
Reset edge detection
Yes
Automatic reset function
Yes
Feedback circuit
Yes
Electronic Fuse
Yes
Start input
Yes
Gross weight
420 g
Wire breakage detection
Yes
Standards
IEC 61508, IEC/EN 60204-1, EN 60947-5-1
Short-circuit recognition
Yes
Enclosure material
Glass-fibre reinforced thermoplastic, ventilated
Stop-Category
0, 1
Material of the contacts, electrical
AgSn0, Ag-Ni, self-cleaning, positive drive
Climatic stress
EN 60068-2-78

Related documents SRB220XV2 / V.2 Specs