AZS 2305.1 110 VAC Schmersal Safety Switches

Product Details

• Switching capacity, maximum
  24 VDC
• Voltage, Utilisation category DC12
  24 VDC
• Current, Utilisation category DC12
  0.1 A
• Conduction resistance, maximum
  40 Ω
• Switching capacity, minimum
  10 mA
• Input signal, HIGH Signal 1
  10 … 30 VDC
• Current, Utilisation category DC13
  2 A
• Voltage, Utilisation category AC15
  250 VAC
• EMC rating
  EMC-Directive
• Input signal, LOW Signal 0
  0 … 2 VDC
• Voltage, Utilisation category DC13
  24 VDC
• Current, Utilisation category AC-15
  2 A
• Pull-in delay at RESET, typically
  20 ms
• Pull-in delay at automatic start, maximum, typically
  100 ms
• Drop-out delay in case of emergency, typically
  20 ms
• Drop-out delay in case of power failure, typically
  80 ms
• Note (Contact resistance)
  in new state
• Contact resistance, maximum
  0.1 Ω
• Rated control voltage at AC 60 Hz, maximum
  26.4 VAC
• Electrical power consumption
  5 W
Rated AC voltage for controls, 50 Hz, minimum
20.4 VAC
Rated AC voltage for controls, 60 Hz, minimum
20.4 VAC
Rated control voltage at AC 50 Hz, maximum
26.4 VAC
Frequency range
50 Hz, 60 Hz
Rated operating voltage
110 VAC
Degree of pollution to VDE 0110
2
Overvoltage category
III
Rated impulse withstand voltage Uimp
4 kV
Restistance to shock
30 g / 11 ms
Resistance to vibrations to EN 60068-2-6
10 ... 55 Hz, Amplitude 0.35 mm
Storage and transport temperature, maximum
+70 °C
Ambient temperature, maximum
+55 °C
Degree of protection of clips or terminals
IP20
Ambient temperature, minimum
+0 °C
Storage and transport temperature, minimum
-25 °C
Degree of protection of the mounting space
IP54
Tightening torque of Clips
0.4 Nm
Degree of protection of the enclosure
IP40
Depth
110 mm
Width
55 mm
Note (Cable section)
All indications about the cable section are including the conductor ferrules.
Height
75 mm
Cable section, maximum
4 mm²
Mounting
Snaps onto standard DIN rail to EN 60715
Number of undelayed semi-conductor outputs with signaling function
2
Number of signalling outputs
2
Number of LEDs
1
Wire breakage detection
Yes
Number of shutters
1
Terminal Connector
Screw connection, rigid or flexible
Number of safety contacts
3
Number of openers
1
Standards
IEC/EN 60204-1, BG-GS-ET-20, EN ISO 13849-1
Integral System Diagnostics, status
Yes
Short-circuit recognition
Yes
Reset after disconnection of supply voltage
Yes
Automatic reset function
Yes
Earth connection detection
Yes
Enclosure material
Glass-fibre, reinforced thermoplastic
Gross weight
445 g

Related documents AZS 2305.1 110 VAC Specs