AZM300B-ST-1P2P-T Schmersal Safety Switches

Product Details

• Current, Utilisation category DC13
  0.05 A
• Test pulse interval, typical
  1000 ms
• Current leakage Ir
  0.5 mA
• Voltage, Utilisation category DC13
  24 VDC
• Voltage, Utilisation category DC12
  24 VDC
• Versions
  short-circuit proof, p-type
• Current, Utilisation category DC12
  0.05 A
• Voltage drop Ud, maximum
  4 V
• Classification ZVEI CB24I, Source
  C2
• Classification ZVEI CB24I, Sink
  C1, C2
• Test pulse interval, minimum
  100 ms
• Test pulse duration, maximum
  0.5 ms
• Current consumption at 24V
  5 mA
• Duty cycle solenoid
  100 %
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• External wiring and device fuse rating
  2 A gG
• Switching frequency, maximum
  0.5 Hz
• Required rated short-circuit current to EN 60947-5-1
  100 A
• Current consumption with solenoid ON, average
  200 mA
• Current consumption with solenoid ON, peak
  350 mA / 200 ms
Notes (Power supply, general)
stabilised PELV power supply
No-load supply current I0
100 mA
Operating voltage, maximum
26.4 VDC
Degree of pollution to IEC/EN 60664-1
3
Rated impulse withstand voltage Uimp
0.8 kV
Operating voltage, minimum
20.4 VDC
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Overvoltage category
III
Rated insulation voltage Ui
32 VDC
Restistance to shock
30 g / 11 ms
Protection rating
III
Note (Relative humidity)
non-condensing, non-icing
Storage and transport temperature, maximum
+90 °C
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Relative humidity, maximum
93 %
Ambient temperature, maximum
+60 °C
Storage and transport temperature, minimum
-10 °C
Ambient temperature, minimum
+0 °C
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Length of sensor
146 mm
Width of sensor
87.5 mm
Height of sensor
55 mm
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Ensured switch distance ON Sao
1 mm
Length of sensor chain, maximum
200 m
Terminal Connector
Connector M12, 8-pole, A-coded
Ensured switch distance OFF Sar
20 mm
Switch distance
2 mm
Tightening torque for the fixing screws, maximum
7 Nm
Type of the fixing screws
2x M6
Tightening torque of the fixing screws, minimum
6 Nm
Latching force, adjustable, position 1
25 N
Latching force, adjustable, position 2
50 N
Angular offset between interlocking device and actuator, maximum
2 °
Clamping force, maximum Fmax
1,500 N
Clamping force in accordance with ISO14119 Fzh
1,150 N
Mechanical life, minimum
1,000,000 Operations
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Number of fail-safe digital outputs
2
Safety functions
Yes
Integral System Diagnostics, status
Yes
Series-wiring
Yes
Short-circuit recognition
Yes
Emergency exit
Yes
Short circuit detection
Yes
Latching
Yes
Duration of risk, maximum
200 ms
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Power to unlock
Yes
Actuator monitored
Yes
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Standards
IEC 61508, IEC 60947-5-3, EN ISO 13849-1
general information
Universal coding
Active principle
RFID
Gross weight
610 g
Time to readiness, maximum
5,000 ms
Frequency band RFID
125 kHz
Transmit power, maximum
-6 dB/m
Coding level according to ISO 14119
Low

Related documents AZM300B-ST-1P2P-T Specs