AZM300B-I2-ST-SD2P-A Schmersal Safety Switches

Product Details

• Storage and transport temperature, minimum
  -10 °C
• Degree of protection
  IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
• Terminal Connector
  Connector M12, 8-pole, A-coded
• Latching force, adjustable, position 1
  25 N
• Clamping force in accordance with ISO14119 Fzh
  1,150 N
• Note (Mechanical lifetime)
  When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
• Manual release
  Yes
• Actuator monitored
  Yes
• Time to readiness, maximum
  5,000 ms
• Enclosure material
  Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
• Wiring capacity
  50 nF
• Operation current
  150 mA
• Voltage drop Ud, maximum
  4 V
• Current, Utilisation category DC13
  0.05 A
• Test pulse interval, typical
  1000 ms
• Current, Utilisation category DC12
  0.05 A
• Voltage, Utilisation category DC13
  24 VDC
• Voltage, Utilisation category DC12
  24 VDC
• Current leakage Ir
  0.5 mA
• Versions
  short-circuit proof, p-type
Current consumption at 24V
5 mA
Classification ZVEI CB24I, Source
C2
Classification ZVEI CB24I, Sink
C1, C2
Test pulse interval, minimum
100 ms
Duty cycle solenoid
100 %
Test pulse duration, maximum
0.5 ms
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
External wiring and device fuse rating
2 A gG
Required rated short-circuit current to EN 60947-5-1
100 A
Switching frequency, maximum
0.5 Hz
Current consumption with solenoid ON, peak
350 mA / 200 ms
Current consumption with solenoid ON, average
200 mA
No-load supply current I0
100 mA
Operating voltage, maximum
26.4 VDC
Notes (Power supply, general)
stabilised PELV power supply
Operating voltage, minimum
20.4 VDC
Overvoltage category
III
Rated insulation voltage Ui
32 VDC
Rated impulse withstand voltage Uimp
0.8 kV
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Degree of pollution to IEC/EN 60664-1
3
Protection rating
III
Restistance to shock
30 g / 11 ms
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Note (Relative humidity)
non-condensing, non-icing
Relative humidity, maximum
93 %
Ambient temperature, minimum
+0 °C
Ambient temperature, maximum
+60 °C
Storage and transport temperature, maximum
+90 °C
Length of sensor
120 mm
Width of sensor
87.5 mm
Height of sensor
35 mm
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Length of sensor chain, maximum
200 m
Switch distance
2 mm
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Ensured switch distance OFF Sar
20 mm
Ensured switch distance ON Sao
1 mm
Clamping force, maximum Fmax
1,500 N
Type of the fixing screws
2x M6
Tightening torque for the fixing screws, maximum
7 Nm
Latching force, adjustable, position 2
50 N
Tightening torque of the fixing screws, minimum
6 Nm
Angular offset between interlocking device and actuator, maximum
2 °
Short circuit detection
Yes
Safety functions
Yes
Number of fail-safe digital outputs
2
Series-wiring
Yes
Mechanical life, minimum
1,000,000 Operations
Integral System Diagnostics, status
Yes
Latching
Yes
Short-circuit recognition
Yes
Power to lock
Yes
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Serial diagnostics
Yes
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Duration of risk, maximum
200 ms
Transmit power, maximum
-6 dB/m
Frequency band RFID
125 kHz
general information
Individual coding, multiple teaching
Gross weight
610 g
Standards
IEC 61508, IEC 60947-5-3, EN ISO 13849-1
Coding level according to ISO 14119
High
Active principle
RFID

Related documents AZM300B-I2-ST-SD2P-A Specs