AZM300B-I2-ST-1P2P-T Schmersal Safety Switches

Product Details

• Current, Utilisation category DC13
  0.05 A
• Test pulse interval, typical
  1000 ms
• Current leakage Ir
  0.5 mA
• Voltage, Utilisation category DC13
  24 VDC
• Current, Utilisation category DC12
  0.05 A
• Voltage, Utilisation category DC12
  24 VDC
• Voltage drop Ud, maximum
  4 V
• Versions
  short-circuit proof, p-type
• Classification ZVEI CB24I, Source
  C2
• Classification ZVEI CB24I, Sink
  C1, C2
• Test pulse interval, minimum
  100 ms
• Test pulse duration, maximum
  0.5 ms
• Duty cycle solenoid
  100 %
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Current consumption at 24V
  5 mA
• Switching frequency, maximum
  0.5 Hz
• External wiring and device fuse rating
  2 A gG
• Required rated short-circuit current to EN 60947-5-1
  100 A
• Operating voltage, maximum
  26.4 VDC
• Current consumption with solenoid ON, average
  200 mA
Current consumption with solenoid ON, peak
350 mA / 200 ms
Operating voltage, minimum
20.4 VDC
No-load supply current I0
100 mA
Notes (Power supply, general)
stabilised PELV power supply
Overvoltage category
III
Rated impulse withstand voltage Uimp
0.8 kV
Degree of pollution to IEC/EN 60664-1
3
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Rated insulation voltage Ui
32 VDC
Protection rating
III
Restistance to shock
30 g / 11 ms
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Note (Relative humidity)
non-condensing, non-icing
Relative humidity, maximum
93 %
Storage and transport temperature, maximum
+90 °C
Storage and transport temperature, minimum
-10 °C
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Ambient temperature, maximum
+60 °C
Height of sensor
55 mm
Ambient temperature, minimum
+0 °C
Length of sensor
146 mm
Width of sensor
87.5 mm
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Length of sensor chain, maximum
200 m
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Ensured switch distance OFF Sar
20 mm
Terminal Connector
Connector M12, 8-pole, A-coded
Ensured switch distance ON Sao
1 mm
Switch distance
2 mm
Tightening torque for the fixing screws, maximum
7 Nm
Tightening torque of the fixing screws, minimum
6 Nm
Latching force, adjustable, position 2
50 N
Type of the fixing screws
2x M6
Time to readiness, maximum
5,000 ms
Latching force, adjustable, position 1
25 N
Clamping force in accordance with ISO14119 Fzh
1,150 N
Clamping force, maximum Fmax
1,500 N
Angular offset between interlocking device and actuator, maximum
2 °
Gross weight
646 g
Mechanical life, minimum
1,000,000 Operations
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Number of fail-safe digital outputs
2
Series-wiring
Yes
Integral System Diagnostics, status
Yes
Short-circuit recognition
Yes
Short circuit detection
Yes
Emergency exit
Yes
Latching
Yes
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Safety functions
Yes
Duration of risk, maximum
200 ms
general information
Individual coding, multiple teaching
Coding level according to ISO 14119
High
Transmit power, maximum
-6 dB/m
Power to unlock
Yes
Actuator monitored
Yes
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Active principle
RFID
Frequency band RFID
125 kHz
Standards
IEC 61508, IEC 60947-5-3, EN ISO 13849-1

Related documents AZM300B-I2-ST-1P2P-T Specs