AZM300B-I2-ST-1P2P-A-T Schmersal Safety Switches

Product Details

• Test pulse interval, typical
  1000 ms
• Voltage, Utilisation category DC12
  24 VDC
• Current leakage Ir
  0.5 mA
• Versions
  short-circuit proof, p-type
• Voltage, Utilisation category DC13
  24 VDC
• Voltage drop Ud, maximum
  4 V
• Current, Utilisation category DC13
  0.05 A
• Current, Utilisation category DC12
  0.05 A
• Classification ZVEI CB24I, Sink
  C1, C2
• Classification ZVEI CB24I, Source
  C2
• Test pulse interval, minimum
  100 ms
• Test pulse duration, maximum
  0.5 ms
• Duty cycle solenoid
  100 %
• Current consumption at 24V
  5 mA
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Switching frequency, maximum
  0.5 Hz
• External wiring and device fuse rating
  2 A gG
• Required rated short-circuit current to EN 60947-5-1
  100 A
• Current consumption with solenoid ON, peak
  350 mA / 200 ms
• Current consumption with solenoid ON, average
  200 mA
No-load supply current I0
100 mA
Notes (Power supply, general)
stabilised PELV power supply
Operating voltage, maximum
26.4 VDC
Operating voltage, minimum
20.4 VDC
Overvoltage category
III
Degree of pollution to IEC/EN 60664-1
3
Rated insulation voltage Ui
32 VDC
Rated impulse withstand voltage Uimp
0.8 kV
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Protection rating
III
Restistance to shock
30 g / 11 ms
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Note (Relative humidity)
non-condensing, non-icing
Ambient temperature, minimum
+0 °C
Height of sensor
55 mm
Ambient temperature, maximum
+60 °C
Storage and transport temperature, maximum
+90 °C
Relative humidity, maximum
93 %
Storage and transport temperature, minimum
-10 °C
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Width of sensor
87.5 mm
Length of sensor
146 mm
Switch distance
2 mm
Ensured switch distance ON Sao
1 mm
Ensured switch distance OFF Sar
20 mm
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Length of sensor chain, maximum
200 m
Tightening torque for the fixing screws, maximum
7 Nm
Terminal Connector
Connector M12, 8-pole, A-coded
Latching force, adjustable, position 1
25 N
Clamping force in accordance with ISO14119 Fzh
1,150 N
Clamping force, maximum Fmax
1,500 N
Tightening torque of the fixing screws, minimum
6 Nm
Type of the fixing screws
2x M6
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Latching force, adjustable, position 2
50 N
Angular offset between interlocking device and actuator, maximum
2 °
Mechanical life, minimum
1,000,000 Operations
Integral System Diagnostics, status
Yes
Number of fail-safe digital outputs
2
Safety functions
Yes
Series-wiring
Yes
Short circuit detection
Yes
Emergency exit
Yes
Short-circuit recognition
Yes
Latching
Yes
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Actuator monitored
Yes
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Duration of risk, maximum
200 ms
general information
Individual coding, multiple teaching
Frequency band RFID
125 kHz
Gross weight
610 g
Standards
IEC 61508, IEC 60947-5-3, EN ISO 13849-1
Active principle
RFID
Time to readiness, maximum
5,000 ms
Transmit power, maximum
-6 dB/m
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Coding level according to ISO 14119
High

Related documents AZM300B-I2-ST-1P2P-A-T Specs